Professional Documents
Culture Documents
Stw8Nc90Z: N-Channel 900V - 1.1 - 7.6A To-247 Zener-Protected Powermesh™Iii Mosfet
Stw8Nc90Z: N-Channel 900V - 1.1 - 7.6A To-247 Zener-Protected Powermesh™Iii Mosfet
APPLICATIONS
■ SINGLE-ENDED SMPS IN MONITORS,
THERMAL DATA
Rthj-case Thermal Resistance Junction-case Max 0.66 °C/W
Rthj-amb Thermal Resistance Junction-ambient Max 30 °C/W
Rthc-sink Thermal Resistance Case-sink Typ 0.1 °C/W
Tl Maximum Lead Temperature For Soldering Purpose 300 °C
AVALANCHE CHARACTERISTICS
Symbol Parameter Max Value Unit
Avalanche Current, Repetitive or Not-Repetitive
IAR 7.6 A
(pulse width limited by Tj max)
Single Pulse Avalanche Energy
EAS 430 mJ
(starting Tj = 25 °C, ID = IAR, VDD = 50 V)
ON (1)
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250 µA 3 4 5 V
Static Drain-source On VGS = 10 V, ID = 3.8 A 1.1 1.38 Ω
RDS(on)
Resistance
VDS > ID(on) x RDS(on)max,
ID(on) On State Drain Current 7.6 A
VGS = 10V
DYNAMIC
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VDS > ID(on) x RDS(on)max,
gfs (1) Forward Transconductance 9 S
ID =3.8A
Ciss Input Capacitance 3550 pF
Coss Output Capacitance 205 pF
VDS = 25V, f = 1 MHz, VGS = 0
Reverse Transfer
Crss 25 pF
Capacitance
2/8
STW8NC90Z
3/8
STW8NC90Z
4/8
STW8NC90Z
5/8
STW8NC90Z
Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform
Fig. 3: Switching Times Test Circuits For Fig. 4: Gate Charge test Circuit
Resistive Load
6/8
STW8NC90Z
mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.
G 10.9 0.429
L4 34.6 1.362
L5 5.5 0.217
M 2 3 0.079 0.118
P025P
7/8
STW8NC90Z
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is
granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are
subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products
are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a trademark of STMicroelectronics
http://www.st.com
8/8