Professional Documents
Culture Documents
Alcomer 810 Types: Technical Information
Alcomer 810 Types: Technical Information
September 2015
Performance Chemicals
Global Oilfield Solutions
Chemical Nature
Alcomer 810 types are quaternized polyacrylamide based copolymers, which exhibit
varying degrees of cationic charge and molecular weight. They are supplied as free
flowing powders.
Application
Alcomer 810 types have been specifically designed to flocculate water based drilling
muds or sludges where such wastes are thickened or dewatered using mechanical
equipment such as centrifuges. Operation over a wide pH range (4 – 9).
Properties
Appearance Off-white, granular solid
Bulk density Approx. 0.7 g/cm3
pH of 1% solution at 25 °C Approx. 4
Advantages
Besides better dewatering and improved floc structure, UMA technology creates
more active fractions of the molecular mass distribution – the latter leading directly
to improved dose efficiency. A general consequence of this technology is that a r
obust flocculant is produced. This gives greater tolerance to changing substrate
characteristics, providing better process control.
It is recommended that stock solutions at 0.25 – 0.5 % are prepared regularly and for
maximum effect such solutions should be used within 5 days. Beyond this period some
loss in efficiency may occur.
Page 1 of 2
Alcomer 810 types, TI/ EVG 0106 us
September 2015
Labeling
Please refer to the latest safety data sheet (SDS) for more detailed information on product safety.
Technical Service
Advice and assistance in the running of laboratory tests is given by representatives of BASF, who are experienced in oilfield
applications.
Note
he data contained in this publication are based on our current knowledge and experience. In view of the many factors that may
T
affect processing and application of our product, these data do not relieve processors from carrying out their own investigations
and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose.
Any descriptions, drawings, photographs, data, proportions, weights etc. given herein may change without prior information and
do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure
that any proprietary rights and existing laws and legislation are observed.
September 2015
BASF Corporation BASF SE BASF S.A. BASF South East Asia Pte. Ltd. BASF Middle East LLC
Global Oilfield Solutions Global Oilfield Solutions Global Oilfield Solutions Global Oilfield Solutions Global Oilfield Solutions
3120 Hayes Road G-EVG/GM – J542 S Avenida das Nações Unidas, #35-01 Suntec Tower One P. O. Box 2996
Suite 200 67056 Ludwigshafen 14.171 Morumbi 7 Temasek Boulevard Dubai
Houston, TX 77082 Germany 04794-000 São Paulo 038987 Singapore United Arab Emirates
US Phone: +49 621 60-0 Brazil Singapore Phone +971 4 8072222
Phone: +1 800 7941019 Fax: +49 621 60-58983 Phone: +55 11 2039-3482 Phone: +65 6393-5208 Fax: +971 4 8072149
Fax: +1 877 2451806 Fax: +55 11 2039-2786 Fax: +65 6430-9899
oilfieldsolutions@basf.com
www.oilfield-solutions.basf.com
Page 2 of 2