Professional Documents
Culture Documents
MOEP-PR-SP-0004 - Specification For Valve - Rev.B PDF
MOEP-PR-SP-0004 - Specification For Valve - Rev.B PDF
MOEP-PR-SP-0004 - Specification For Valve - Rev.B PDF
PROJECT Petrochina (Halfaya) MISSAN CRUDE Oll. EXPORT PIPELINE be SS CNOOC Iraq DOC, NO.: MOEP-PR-SP-0004 REV. B PAGE 35 OF 76 Vaive Specification Specified Valve Size Shall Be Equal To Nominal Pipe Size in ASME 836.10M Pressure 1506 Test Pressure MPa (ASME B16.34) Temperature Rating Body [2.94 | Seat [ 2.186 Design Code 1SO 18761 / ASME B16.34 Carbon Steet Body Material ASTRATONN ; Trim Material Trim: AISI 410, Sealing face: CHIRPTFE Bolting Bolt To ASTM A193 B7, Nut To ASTM A194 2H; Hot Dipped Galvanized To BS729 nd Connection 150 Lb_RF Flange To ASME 816.5. iH ‘Temperature Limitations eee fOG. Valve Operation Body Construction | Lift Piston 2. Valves To Be Suitable For Full Vacuum. 3. Valves To Be Asbestos Free. 4. Hydraulic Test According To API 598 / ASME B 16.34 6. inner Or Outer Leakage Is Not Acceptable 6. Valve design life is 20 years 7-The material of construction the valves is based on the fluid properties of Halfaya Project Surface Facility early FCP. This material of construction shall be verified when the fluid properties of Halfaya Project Surface Facility Phase 2 is made available. Trim Construction __| Fire Tested To API GO7/APIGFA(Providing Certificate) Service ‘Open Drain(Diesel Fuel) Notes: Packing Material: Emission Free Material 4. Face To Face Dimensions To ISO 15761. Short Pattern Valves Aro. | Gasket Material Not Acceptable Manufacturer Standard ‘Additional Requirements: See Specification Valve Check List Approved Manufacturer ‘Manufacturer Figure Number Nominal Size Range 4A Kw Valve Type Check, Lift Piston "Tag Number CKAA31 Piping Class 13. ‘Specification Number MOEP-PR-SP-0004MISSAN CRUDE OIL EXPORT PIPELINE ee PROJECT SS Petrochina (Halfaya) CNOOC Iraq DOC. NO.: MOEP-PR-SP-0004 REV.:B PAGE 36 OF 76 Valve Specification Specified Valve Size Shall Be Equal To Nominal Pipe Size in ASME B36.10M Connection. For NPS 10" and above, vendor To Supply The Matching Flange, Bolts, Nuts, And Gasket According To Project Specification HFY2-GEN-PIP-SP-00005. 28-1700 End Connection Pressure fea Test Pressure MPa (ASME B16.34) | | Temperature Rating | te Body 2.94 Seat | 2.156 | Design Code API 6D / ASME 816.34 Carbon Steet Body Material ASTM A216 WoB. Trim Material “Trim: AISI 410, Sealing face: CrIG/RPTFE Bolting Bolt To ASTM A193 B7, Nut To ASTM A194 2H; Hot Dipped Galvanized To BS729 150 Lb To Be Connected With RF Flanges According To ASME B16.5. Wafer Type ‘Temperature Limitations ‘Valve Operation Body Construction Type, Single Plate, Long Pattern ‘Trim Construction | Fire Tested To API G07/APIGFA(Providing Cerificate) Service Open Drain(Diesel Fuel) ne Notes: Packing Material: Emission Free Material 1. Face To Face Dimensions To Wafer Check Valve Of API 6D. Short | Gasket Material Pattern Valves Are Not Acceptable Manufacturer Standard 3. Valves To Be Asbestos Free. See Specification 4, Hydraulic Test According To API 598 / ASME B 16.34 6. Inner Or Outer Leakage Is Not Acceptable 6. Valve design life is 20 years 7.The material of construction the valves is based on the fluid propetties of Halfaya Project Surface Facility early FCP. This material of construction shall be verified when the fluid properties of Halfaya Project Surface Facility Phase 2 is made available. i | 2. Valves To Be Suitable For Full Vacuum. ‘Adcitional Requirements: | Valve Check List | Approved Manufacturer Manufacturer Figure Number Nominal Size Range 2-10" Tag Number Valve Type Wafer Check Valve ae Piping Class 103 ‘Specification Number MOEP-PR-SP-0004MISSAN GRUDE OIL EXPORT PIPELINE ICI: PROJECT Se Petrochina (Halfaya) CNOOC Iraq DOC. NO.; MOEP-PR-SP-0004 REV. B PAGE 37 OF 76 Valve Specification Specified Valve Size Shall Be Equal To Nominal Pipe Size in ASME B36.10M Pressure Tore “Test Pressure MPa (ASME B16.34) ‘Temperature Reting Body [294 | Seat [2160 | Design Code 180 15761 And ASME B16.34 ; Carbon Steel Fe Net Forged- ASTM A105N “Tim Material ‘Trim: AISI 410, Sealing face: GrI@/RPTFE Botting Bolt To ASTM A193 B7, Nut To ASTM A194 2H; Hot Dipped Galvanized To BS720 End Connection | 16016 RF Flange To ASME BI6S. Temperature a Limitations forte [ Valve Operation | Handwheet Bolled Bonnet, Rising Stem Body Construction | Outside Sorew And Yoke Buitertly Type Plug TrimConstruction | Fire Tested To API GO7/APIGFA(Providing Certificate) Senvice ~TOpen Drain(Diesel Fuel) 2 Notes: Packing Material Emission Free Material 4, Face To Face Dimensions To ISO 18761 Gasket Material Short Patter Valves Are Not Acceptable Manufacturer Standard 2. Valves To Be Sutable For Full Vacuum, ‘Additional Requirements: 3. Valves To Be Asbestos Free. See Specification 4 Inner Or Outer Leakage Is Not Acceptable 5. Valve design lfe is 20 years 6.The material of construction the valves is based on the fluid properties of Halfaya Project Surface Facilly early FCP. This material of construction shall be verified when the fluid properlies of Halfaya Project Surface Faclity Phase 2 is made available. ss as Valve Check List Approved Manufacturer Manufacturer Figure Number Nominal Size Range set Tag Number VaNve Type Globe ; i 7 rae Piping Class 183 Peon oe ented& 7 MISSAN GRUDE OIL EXPORT PIPELINE Ve SS PROJECT SF Petrochina (Halfaya) CNOOC Iraq DOG, NO.: MOEP-PR-SP-0004 REV.:B | PAGE 38 OF 76 Valve Specification Specified Valve Size Shall Be Equal To Nominal Pipe Size in ASME B36.10M Pressure ‘+508 “Test Pressure MPa (ASME B16 34) Temperature Rating Ee Body 1204 | Seal [2.166 Design Code BS 1873 And ASME 816.34 Carbon Steel Body Material ASTM A216 WCB "Tim Material “Trim: AISI 410, Sealing face: CriSIRPTFE Boling Bolt To ASTM A123 B7, Nut To ASTM A194 2H; Hot Dipped Galvanized To BS729 End Connection | 160 Lb RF Flange To ASME BIG. f Ef “Temporalure Zi Limitations ceaeae Valve Operation | Handwheel Bolted Bonnet, Rising Stern Body Constuction | Outside Screw And Voke Bulterfly Type Plug, Renewable Seat Trim Construction | Fire Tested To AP| 607/APISFA(Providing Certificate) Senco ‘Open Drain(Diesel Fuel) Notes: Packing Material Emission Free Material 1. Face To Face Dimensions To BS 1873. Gasket Material Short Paltern Valves Are Not Acceptable Manufacturer Standard 2, Valvas To Be Suitable For Full Vacuum, ‘Additional Requirements 3 Valves To Be Asbestos Free ‘See Specification 4, Inner Or Outer Leakage ls Not Acceptable = 5. Valve design life is 20 years 6.The material of construction the valves is based on the fluid properties of Halfaya Project Surface Faclity early FOP. Thi ‘material of construction shall be verified when the fuid properties of Halfaya Project Surface Facility Phaso 2 is made availabe. Valve Check List Approved Manufacturer Manufacturer Figure Number Nominal Size Range a Tag Number [Valve Type Globe ee Piping Class 143 Se aoen peanPetrochina (Halfaya) MISSAN CRUDE OIL EXPORT PIPELINE a PROJECT SS CNOOG Iraq DOC. NO.: MOEP-PR-SP-0004 PAGE 39 OF 76 Valve Specification Specified Valve Size Shall Be Equal To Nominal Pipe Size in ASME B36.10M Pressure ‘Temperature Rating | TO Design Code BS 1873 And ASME B16.24 ~ | Carbon Steel ss ee aot! ASTM A216 WoB ‘Trim Material Trim: AISI 410, Sealing face: Cra/RPTFE _ Bolling Bolt To ASTM A193 BT, Nut To ASTM A194 2H; Hot Dipped Galvanized To BS729 760 Lb RF Flange To ASME E165. End Connection —_| For NPS 10" and above, vendor To Supply The Matching Flange, Bolls, Nuts, And __| Gasket According To Project Specification HFY2-GEN-PIP-SP-00006, Temperate | s-a7oe imitations Valve Operation | Gear Operator Body Construction Trim Construction __| Fire Tested To AP! GO7/APIGFA(Providing Certificate Bolted Bonnet, Rising Stern Outside Screw And Yoke Butterfly Type Plug, Renewable Seat Service ‘Open Drain(Diesel Fuel) = Notes: Packing Material: Emission Free Material 4. Face To Face Dimensions To BS 1873. Gasket Material Short Pattern Valves Are Not Acceptable Manufacturer Standard 2. Valves To Be Suitable For Full Vacuum. ‘Additional Requirements: 3. Valves To Be Asbestos Free, See Specification 4, Inner Or Outer Leakage Is Not Acceptable 5. Valve design life is 20 years 6.The material of construction the valves is based on the fluid properties of Halfaya Project Surface Facility early FCP. This material of construction shall be verified when the fluid properties of Halfaya Project Surface Facility Phase 2 is made available. Vaive Check List Approved Manufacturer Manufacturer Figure Number Nominal Size Range 10" Tag Number Valve Type Globe eas Pring cass 108 Speciation numerMISSAN CRUDE OIL EXPORT PIPELINE ie, PROJECT ] Petrochina (Halfaya) CNOOC Iraq DOC, NO.: MOEP-PR-SP-0004 REV.:B PAGE 40 OF 76 Vaive Specification ‘Specified Valve Size Shall Be Equal To Nominal Pipe Size in ASME B36.40M Pressure eons ‘Test Pressure_ MPa (ASME B16.34) Temperature Rating Body [294 [Seat | 2.166 Design Code API608/ ASME B16.34 Carbon St Body Material Sona Maa “Tim Material “Trim:S31603, Sealing face: RPTFEIS31603 Saas Bolt To ASTM A193 B7M, Nut To ASTM A194 2HM;, Hot Dipped Galvanized To Balting BS729 End Connection | 150 Lb RF Flange To ASME BI6.5. “Temperature % ieee 29-170 ; Valve Operation | Lever Body Consiru Full Bore, Spit Body, Floating Trim Construction 4, Hydraulic Test According To API 598 / ASME B 16.34 Fire Tested To API 607/APIGFA(Providing Certificate) Anti-Static, Anti Blowout Stem ___| Sealing To Meet Requirements For Medium At Rated Pressure And Temperature Service Fuel Gas (Sour Service) co Notes: Packing Mat 1, Face To Face Dimensions To ASME B16.10 Emission Free Material 2. Valves To Be Asbestos Free. Gasket Material 3, Seals To Be Resistant To Explosive Decompression, Manufacturer Standard ‘Additional Requirements: 5. Valves Shall Have Position Indicator Showing Open And Close Positions, 6. Inner Or Outer Leakage Is Not Acceptable 7. This type of valve is used in sour service. Vendor shall have clear information on the vaive tag that the valves they supplied are sulphur resisting, 8. Valve design life is 20 years, 9. With a lockable device. ‘See Specification ‘Ail Material Used in Sour Service Shall Meet The Requirements Of NACE MR 0175/1S015156 Valve Check List Approved Manufacturer Manufacturer Figure Number Nominal Size Range aA Kw Valve Type Ball ‘Tag Number BAAD3Is Piping Class 103 ‘Specification Number MOEP.PR-SP-0004MISSAN CRUDE OIL EXPORT PIPELINE PROJECT Petrochina (Halfaya) CNOOG Iraq | DOC, NO,: MOEP-PR-SP-0004 REV.: B PAGE 41 OF 76 Valve Specification Specified Valve Size Shall Be Equal To Nominal Pipe Size in ASME B36.10M__ Pressure rar Test Pressure MPa (ASME B16,34) Temperature Rating Body [294 [Seat [2.766 | Design Code API 6D / ASME B16.34 | ; Carbon Steel Beate ASTMAM05N ee ae eet Trim Material ‘Trim'S31603, Sealing face: RPTFE/S31603 Bolt To ASTM A193 B7M, Nut To ASTM A194 2FIM, Hot Dipped Galvanized To Bolting B38 End Connection 150 Lb RF Flange To ASME B16.5. Temperalure iaauaais imnitations a | Valve Operation | Lever | Body Construction | Full Bore, Spit Body, Floating | Fire Tested To API GO7/APIGFA(Providing Cerificate) | Trim Construction | Anti-Static, Anti Blowout Stem i Sealing To Meet Requirements For Medium At Rated Pressure And Temperature | Service Fuel Gas (Sour Service) | Notes Packing Material: 41, Face To Face Dimensions To ASME 816.10 Emission Free Material 2. Valves To Be Asbestos Free. Gasket Material 3. Seals To Be Resistant To Explosive Decompression. Manufacturer Standard 4, Hydraulic Test According To API 598 / ASME B 16.34 Additional Requirements: 5. Valves Shall Have Position Indicator Showing Open And Close See Specification — 7 Positions. All Material Used In Sour Service | 6. Inner Or Outer Leakage Is Not Acceptable Shall Meet The Requirements Of | 7. This lype of valve is used in sour service. Vendor shall have clear | NAGE MR 0175/ISO18156 information on the valve tag that the vaives they supplied are sulphur resisting, 8, Valve design ife is 20 years 9. with a iockable device. Valve Check List Approved Manufacturer Manufacturer Figure Number Nominal Size Range 2a" Tag Number Valve Type Ball = te Piping Class 103 ‘Specification Number MOEP-PR-SP-0004MISSAN CRUDE OIL EXPORT PIPELINE oe PROJECT Ss Petrochina (Halfaya) CNOOC Iraq DOC, NO,: MOEP-PR-SP-0004 REV.:B PAGE 42 OF 76 Valve Speciication Specitied Valve Size Shall Be Equal To Nominal Pipe Size in ASME B96.10M. Pressure aa Test Pressure _MPa (ASME B16 34) | Temperature Rating | 7 Design Gode API6D / ASME B16.34 Carbon Steel Body Material Rename face "Tim Material ‘Trim:S31603, Sealing face: RETFESS1603 Bolt To ASTM A193 B7M, Nut To ASTM A194 2H, Hot Dipped Galvanized To Boling es 460 Lb RF Flange To ASME B16. End Connection _| For NPS 10” and above, vendor To Supply The Matching Flange, Bolts, Nuts, And Gasket According To Project Specification HEY2-GEN-PIP-SP-00005, Temperature aaa Limitations Valve Operation __| Gear Operator Body Construction | Full Bore, Spi Body, Trunnvon Mounted, Fire Tested To API €607/APIGFA(Providing Cerificate) Trim Construction | Anti-Static, Ant Blowout Stem Sealing To Meet Requirements For Medium At Rated Pressure And Temperature Senice Fuel Gas_(Sour Service) Noles: Packing Materia 4. Face To Face Dimensions To ASME 816.10 Emission Free Material 2. Valves To Be Double Block And Bleed ones, With Any End Capable | Gasket Material ©f Bearing Ful Differential Pressure. Manufacturer Standard 3, Valves To Be Asbestos Free. ‘Additional Requirements: 4, Seals To Be Resistant To Explosive Decompression. See Specification 5. Hydraulic Test According To AP| 598 / ASME B 16.34 ‘AllMaterial Used In Sour Service 6. Valves Shall Have Position Indicator Showing Open And Close _| Shall Meet The Requirements Of Positions. NACE MR 0175/IS015156 7. Inner Or Outer Leakage Is Not Acceptable 8. This lype of valve is used in sour service. Vendor shall have clear information on the valve tag that the valves they supplied are sulphur resisling 9. Valve design life is 20 years 410. with a lockable device : FE : Vaive Check List Approved Manufacturer Manufacturer Figure Number Nominal Size Range 610" Valve Type Bal aaa ees Piping Class 1D3. ree paee ence cheMISSAN CRUDE OIL EXPORT PIPELINE pons: PROJECT ]| Petrochina (Halfaya) CNOOC Iraq DOC. NO.: MOEP-PR-SP-0004 REV.:B PAGE 43 OF 76 Valve Spacification Specified Valve Size Shall Be Equal To Nominal Pipe Size in ASME 836.10M ire Tested To API 607/APIBFA(Providing Cerificate) Trim Construction | Anti-Static, Anti Blowout Stem Pressure ca Test Pressure MPa (ASME B16.34) ‘Temperature Rating Body [2.94 | Seat 2.156 Design Code API6D / ASME 816.24 Body Material sannina Trim Material ‘Trim:$31603, Sealing face: RPTFE/S31603 Bolt To ASTM A193 B7M, Nut To ASTM A194 2HM; Hot Dipped Galvanized To Bolting Bara End Connection 150 Lb RF Flange To ASME B16.5. ‘Temperature aoe Limitations eeioe [Valve Operation | Lever z Body Construction Sealing To Meet Requirements For Medium At Rated Pressure And Temperature information on the valve tag that the valves they supplied are sulphur resisting 8. Valve design life is 20 years 9. with a lockable device. Service Fuel Gas (Sour Service) Notes: Packing Material: 4, Face To Face Dimensions To ASME B16.10 Emission Free Material 2. Valves To Be Asbestos Free. Gaskel Material 3. Seals To Be Resistant To Explosive Decompression. Manufacturer Standard 4, Hydraulic Test According To API 598 / ASME B 16.34 ‘Additional Requirements; 5. Valves Shall Have Position Indicator Showing Open And Close See Specification Positions. ‘All Material Used in Sour Service 6, Inner Or Outer Leakage Is Not Acceptable Shall Meet The Requirements Of 7. This type of valve is used in sour service. Vendor shall have clear | NACE MR 017511801513 Valve Type Ball Valve Check List Approved Manufacturer Manufacturer Figure Number Nominal Size Range aa" Tag Number BA-1D36s Piping Class 103 ‘Specification Number MOEP-PR-SP-0004Petrochina (Halfaya) MISSAN CRUDE OIL EXPORT PIPELINE eis PROJECT Se CNOOC Iraq DOC, NO.; MOEP-PR-SP-0004 REV.:B PAGE 44 OF 76 Vaive Specification Specified Valve Size Shall Be Equal To Nominal Pipe Size in ASME B36,10M Pressure a TTest Pressure MPa (ASME B16.34) ‘Temperature Rating Body [2.94 Seat [2.166 Design Code API 6D / ASME B16.24 Body Material wenn nieed Trim Material “Trim:S31603, Sealing face: RPTFE/S31603 — Botting Bolt To ASTM A193 B7M, Nut To ASTM A164 2HM; Hot Dipped Galvanized To BS729 150 Lb RF Flange To ASME 816.6. End Connection ‘Temperature For NPS 10” and above, vendor To Supply The Matching Flange, Bolts, Nuts, And Gasket According To Project Specification HFY2-GEN-PIP-SP-00005. Limitations freee Valve Operation Gear Operator a Body Construction | Single Reduced Bore, Split Body, Trunnion Mounted Trim Construction | Anti-Static, Anti Blowout Stem Fire Tested To API G07/APIGFA(Providing Certificate) Sealing To Meet Requirements For Medium At Rated Pressure And Temperature, Of Bearing Full Differential Pressure. 3, Valves To Be Asbestos Free. 4, Seals To Be Resistant To Explosive Decompression, 6, Hydraulic Test According To API 598 / ASME B 16.34 6. Valves Shall Have Position Indicator Showing Open And Close Positions. 7. Inner Or Outer Leakage Is Not Acceptable 8, This type of valve is used in sour service. Vendor shall have cleer information on the valve tag that the valves they supplied are sulphur resisting. 9, Valve design life is 20 years 40. with a lockable device. Service Fuel Gas (Sour Service) Notes: Packing Material: 1. Face To Face Dimensions To ASME B16.10 Emission Free Material 2. Valves To Be Double Block And Bleed ones, With Any End Capable | Gasket Material Manufacturer Standard Additional Requirements: See Specification ‘All Material Used In Sour Service Shall Meet The Requirements Of NACE MR 0175/1S015156 Valve Check List Approved Manufacturer Manufacturer Figure Number Valve Type Ball Piping Class. 103 Nominal Size Range 610" "Tag Number __BAAD38s. Specification Number MOEP-PR-SP.0004MISSAN CRUDE OIL EXPORT PIPELINE EVO PROJECT 7 Petrochina (Halfaya) CNOOC Iraq DOG. NO.: MOEP-PR-SP-0004 REV.: B PAGE 45 OF 76 Valve Specification Specified Valve Size Shall Be Equal To Nominal Pipe Size in ASME B36.10M Pressure 160 Test Pressure_MPa (ASME B16 34) Temperature Rating Body [294 [Seat 2.166 Design Code ISO 15761 And ASME 816.34 Body Material ant Trim Material ‘Trim:S31603, Sealing face: RPTFE/S31603 Bolt To ASTM A193 87M, Nut To ASTM A104 2HM, Hot Dipped Galvanized To Bolting eens End Connection 150 Lb RF Flange To ASME B16.6. a ‘Temperature z Limitations PHEEE | Peers ores EEE EEE Vaive Operation | Handwhee! Bolted Bonnet, Rising Stem Outside Screw And Yoke Bullerly Type Plug Body Construction Trim Construction Lis Fire Tested To API 07/APIGFA(Providing Certificate 7. This type of valve is used in sour service. Vendor shail have clear information on the valve tag that the valves they supplied are sulphur resisting, 8. Valve design life is 20 years Service ___| Fuel Gas (Sour Service) : ct Notes: Packing Material Emission Free Material 1. Face To Face Dimensions To ISO 15761. Gasket Material Short Pattern Valves Are Not Acceptable Manufacturer Standard. 2, Valves To Be Suitable For Full Vacuum. Additional Requirements: 2, Valves To Be Asbestos Free, See Specification 4, Inner Or Outer Leakage Is Not Acceptable ‘Al Material Used in Sour Service 6. All Material Used In Sour Service Shall Meet The Requirements Of | Shall Meet The Requirements Of NACE MR 0175/1SO18156 NACE MR 0175/1S015156 Valve Check List WA Ke Approved Manufacturer Manufacturer Figure Number Nominal Size Range Valve Type Globe ‘Tag Number GL-4D31s Piping Class 1D3 ‘Specification Number “MOEP-PR-SP-0004MISSAN CRUDE OIL EXPORT PIPELINE ye PROJECT Se Petrochina (Halfaya) CNOOC Iraq DOC. NO.:; MOEP-PR-SP-0004 I) REV.:B PAGE 46 OF 76 Valve Speciication | Specified Valve Size Shall Be Equal T Nominal Pipe Size in ASME B36.10M Body Material Gennes Wien Pressure Tenis “Test Pressue_MPa (ASME B16.34) ‘Temperature Rating Bod) 2.94 Seat | 2.156 Design Code BS 1873 And ASME B16.34 Carbon Steel an Trim Material Trim:S31603, Sealing face: RPTFE/S31603 i Bolt To ASTM A193 B7M, Nut To ASTM A194 2HM; Hot Dipped Galvanized To Bolting BS729 End Connection | 150 Lb RF Flange To ASME B16. Temperature 7 Limitations eee é _| Valve Operation | Handwheel Bolted Bonnet, Rising Stem Body Constiuction | Outside Screw And Yoke Trim Construction | Butterfly Type Plug, Renewable Seat Service Notes: Fuel Gas (Sour Service) 41. Face To Face Dimensions To BS 1873. ‘Short Paltern Valves Are Not Acceptable 2. Valves To Be Suitable For Full Vacuum, 3. Valves To Be Asbestos Free, 4, Inner Or Outer Leakage Is Not Acceptable 6. All Material Used In Sour Service Shall Meet The Requirements Of NACE MR 0175/1S015156 7. This type of valve is used in sour service. Vendor shell have clear information on the valve tag that the valves they supplied are sulphur resisting, 8, Valve design life is 20 years Fire Tested To API 607/APIGFA\(Providing Certificate) Packing Material Emission Free Material Gasket Maierial Manufacturer Standard ‘Additional Requirements: See Specification ‘All Material Used in Sour Service Shall Meet The Requirements Of NACE MR 0175/1S015158 Piping Class. 1D3 Valve Check List Approved Manufacturer Manufacturer Figure Number ‘Nominal Size Range ae Tag Number Valve Type Globe es ‘Specification Number MOEP-PR-SP-0004MISSAN CRUDE OIL EXPORT PIPELINE pe PROJECT QS Petrochina (Halfaya) CNOOC Iraq DOC. NO.: MOEP-PR-SP-0004 REV.:B PAGE 47 OF 76 Valve Specification Specified Valve Size Shall 8e Equal To Nominal Pipe Size in ASME 836.10M Pressure 1606 ‘Test Pressure MPa (ASME 816.34) Temperature Rating Body [294 | Seai__| 2166 Design Code BS 1873 And ASME B16.34 F Carbon Steel 7 Body Material | ASTM A216 WCB 7 HH "Tim Material Trim:S31603, Sealing face: RPTFE/SS1603 Bolt To ASTM A193 B7M, Nul To ASTM A194 2HM; Hol Dipped Galvanized To Bolling a 150 Lb RF Flange To ASME B65. End Connection _| For NPS 10" and above, vendor To Supply The Matching Flange, Bolts, Nuts, And Gasket According To Project Specification HFY2-GEN-PIP-SP-00005, | Temperature : Limitations ea Valve Operation | Gear Operator Bolted Bonnet, Rising Stem Body Gonstucton | Gotste Soren And yoke Butterfly Type Plug, Renewable Seat “Trim Construction | Fire Tested To AP! 607/APIGFA(Providing Certificate) Service Notes: Packing Wi Emission Free Material 1, Face To Face Dimensions To BS 1873. Gasket Material ‘Short Pattern Valves Are Not Acceptable Manufacturer Standard 2. Valves To Be Suitable For Full Vacuum ‘Additional Requirements: 3, Valves To Be Asbestos Free. See Specification 4. Inner Or Outer Leakage Is Not Acceptable ‘Al Material Used In Sour Service 6. All Material Used In Sour Service Shall Meet The Requirements Of | Shall Meet The Requirements Of NACE MR 0175/1S015156 NACE MR 0175/IS015156 7. This type of valve is used in sour service. Vendor shall have clear information on the valve tag that the vaives they supplied are sulphur resisting. 8, Valve design life is 20 years | Vaive Check List Approved Manufacturer ‘Manufacturer Figure Number Nominal Size Range 40° Fag Numbor Valve Type Globe GL-AD338 ‘Specification Number ‘MOEP.PR-SP-0004. Piping Class 1D3MISSAN CRUDE OIL EXPORT PIPELINE, pee PROJECT QS Petrochina (Halfaya) CNOOC Iraq DOC. NO.; MOEP-PR-SP-0004 REV. B PAGE 48 OF 76 Valve Spealfication | Specified Valve Size Shall Be Equal To Nominal Pipe Size in ASME B36.10M Pressure ‘sons Test Pressure MPa (ASME B16.34) ‘Temperature Rating Body [7.665 | Seat [5621 Design Code ‘APL60B/ ASME B16.34 Boy Matorat | Sarton Stet Material Trim:$31603, Sealing face: RPTFE/S31603 7 ae Boling Bolt To ASTM A193 B7M, Nut To ASTM A194 2HM, Hot Dipped Galvanized To BS729 End Connection 300 Lb RF Flange To ASME 816.5, “Temperature Limitations ieaatate : a - Valve Operation | Lever Body Construction | Full Bore, Split Body, Floating — ‘Trim Construction resisting, Service Cruid Oi, Fuel Gas_(Sour Service) 7 Notes: Packing Material: 4. Face To Face Dimensions To ASME B16.10 Emission Free Material 2. Valves To Be Asbestos Free. Gasket Material 3, Seals To Be Resistant To Explosive Decompression. Manufacturer Standard 4, Hydraulic Test According To API 598 / ASME B 16.34 ‘Additional Requirements: 5. Valves Shall Have Position Indicator Showing Open And Close ‘See Specification Positions. All Material Used In Sour Service 6. Inner Or Outer Leakage Is Not Acceptable Shall Meet The Requirements Of 7. This type of valve is used in sour service. Vendor shall have clear | NACE MR 0175118015150 information on the valve tag that the valves they supplied are sulphur 8. Valve design life is 20 years 9. with a lockable device. Fire Tested To API 607/APIGFA(Providing Certificate) Anli-Static, Anti Blowout Stem Sealing To Meet Requirements For Medium At Rated Pressure And Temperature _ Valve Check List Approved Manufacturer Manufacturer Figure Number Nominal Size Range 112A Valve Type Ball "Tag Number BA-3D318/ BA-3K31s Piping Class 3D3/3X3. ‘Specification Number MOEP.PR-SP-0004MISSAN CRUDE OIL EXPORT PIPELINE a