Professional Documents
Culture Documents
VR Legend Console
VR Legend Console
Input Filters
Channel Strip
Input Filter Module
Dynamic Control
Inserts
Channel Strip
Equalisation Module
Gate/Expander
Hysteresis
" 10dB of hysteresis is a good starting value for setting the gate.
To adjust hysteresis
! Turn the HYST rotary control to the EXP position (i.e. fully
anti-clockwise).
Threshold
Allows users to set the range (mute depth) of the gate over a
50dB range.
To set the range of the gate
Limiter/Compressor
VRL Channel Strip The associated LED will illuminate to confirm selection.
Dynamics Module
Gain make up
Threshold ranges
Compression Ratio
Release time
Insertion
Provides users with an independently switchable patch
INS PREQ
insertion.
17 1.5
DYN To switch the insertion facility into the signal path
11 3
kHz 7 4.7 ! Press the INS push-button.
HI-Q
8.7 0.8 The INS push-button LED will illuminate to confirm
5.6 1.4
selection.
kHz 3.6 2.3
To switch the insertion out of the path
Q
The LED will cease to be illuminated.
2k 190
Q
" The insertion will provide an output regardless of the INS key
1k4 360 state.
Hz 870 580
HI-Q To switch the insertion facility in/out of the monitor
370 33 path
240 63
! Press the INS push-button located adjacent to the small
Hz 150 100 fader.
EQ
The INS key LED will illuminate to confirm selection.
VRL Channel Strip To switch the insertion out of the monitor path
Equalisation Module
! Press the INS push-button adjacent to the small fader
again.
Equaliser
The equaliser consists of four continuously-variable
INS PREQ
overlapping frequency bands with a peaking characteristic.
17 1.5
DYN Users can switch from peak to shelving.
11 3
kHz 7 4.7 Frequency control ranges
HI-Q
8.7 0.8 Low: 33Hz to 370Hz
5.6 1.4 Mid1: 190Hz to 2kHz
kHz 3.6 2.3 Mid2: 0.8kHz to 8.7kHz
High: 1.5kHz to 17kHz
Mid Band Q
The mid band equalisers (pale blue and light grey rotary
controls) have variable Q adjusted across a range of 0.5 to
9.
The high and low band equalisers are switchable from peak
to shelving.
To switch high band EQ from peak to shelving
Cut/Boost
Sidechain Equalising
Allows users to insert the module equaliser into the control
Sidechain of the dynamics unit.