Professional Documents
Culture Documents
1 Load Flow - Br917015en PDF
1 Load Flow - Br917015en PDF
The CYMFLOW software is the power flow analysis module of the CYME power
engineering software for the analysis of three-phase electric power networks. It is
equipped with powerful analytical options and alternative solution techniques.
Analytical Capabilities ■■ Flexible AC Transmission Systems ■■ Tabular reports can also be directly
(FACTS) representation of: exported to other spreadsheet
■■ Analyzes networks with thousands of
• Static synchronous compensator programs such as Microsoft Excel®
buses and branches
(STATCOM), ■■ Color coding on the network one-line
■■ Multiple swing buses allowed
• Unified Power Flow Controller diagram as per user-defined criteria; for
■■ Automatic swing bus selection for example:
(UPFC)
isolated subsystems
■■ Customer load model library manager • Overloaded equipment
■■ Simultaneous solution for islanded
for any type of load model including: • Voltage violations of buses and
networks
• Constant power, constant current nodes
■■ Detailed equipment modeling of
and constant impedance • Visualization of conductor rating that
induction and synchronous motors,
• Composite load model may reflect, for example, improperly
variable frequency drives, bus ways
• Voltage sensitivity exponent load sized cables
and all necessary network elements
for an accurate representation of the model • System voltage levels
network ■■ Capacitors with the following control
■■ Synchronous generator types: voltage, current, reactive
• Reactive power limits and remote current, reactive power, power factor,
voltage control temperature and time-controlled
• Generator reactive power capability ■■ Switchable shunt banks of both
curves capacitive and inductive elements
■■ Local or remote control of voltage ■■ Scaling factors applied to the
and reactive power flow through tap generators and to the loads on the
changing transformers whole network or by zone
■■ Phase angle shift transformer with ■■ Global parameters to include or
active power control exclude any types of equipment from
the analysis
■■ Cogeneration modeling including:
■■ Five limit categories for nominal,
• Induction generators Generator Capability Curves
planning, emergency loading or any
• Wind Energy Conversion Systems user-defined criteria
(WECS)
■■ User-defined units for bus voltages,
• Photovoltaic (PV Cells) generator productions and branch
• Fuel cells flows on both one-line diagrams and
• Micro-turbines tabular reports
■■ Comprehensive representation of DC
transmission lines with rectifier and
inverter controls
Power Electronics - FACTS
Cooper Power Systems, CYME and all CYME module names are valuable trademarks of Cooper Industries in the U.S. and other
countries. You are not permitted to use the Cooper Trademarks without the prior written consent of Cooper Industries.
B1170-12032 • 1012 ©2012 Cooper Industries. All Rights Reserved.