Professional Documents
Culture Documents
OptiX OSN 8800 Product Documentation SCC Factory Default PDF
OptiX OSN 8800 Product Documentation SCC Factory Default PDF
OptiX OSN 8800 Product Documentation SCC Factory Default PDF
Contents
3.2.27.14.8 Switch and Jumper
State Clear the system parameter area. 1010 Only one SCC
board is
configured.
State Restores the system parameter area, database, 1001 Only one SCC
and NE software from the CF card. board is
configured.
State Clear the database in the flash memory. 1011 Only one SCC
board is
configured.
Table 1 Functions of the BIOS switch or jumper
State Erases the database and NE software (patch 1101 Two SCC boards
included). are configured in
1+1 redundancy
backup mode.c
State Clear all the data in the flash memory except the 1111 The user data on
board manufacturing information. The data the SCC board
includes the system data, system parameter areas, needs to be cleared
and extended BIOS files. The upper layer part of before the board is
BIOS is not started. sent back to the
factory for repair.
a: The system parameter area include NE IP address, gateway IP address, subnet mask, NE ID, extend
ID, the node ID of the ASON NE, route ID, OSPF IP address.
b: The database includes NE configuration data such as user names of the NE and service
configurations.
c: For V100R008C00 and later versions, you do not need to set the BIOS jumpers or switches to clear
the database.