Professional Documents
Culture Documents
2012-06-25 043538 Transmission 428b PDF
2012-06-25 043538 Transmission 428b PDF
Transmission
9W-7920, 8E-7681, 9U-9495
(1) Shim input shaft as required.
6T-9142 Shim:
6T-9143 Shim:
6T-9145 Shim:
6T-9146 Shim:
6T-9147 Shim:
6T-9144 Shim:
NOTE: Install thickest shim closest to bearing and thinnest shim next to spacer 7T-3034.
7T-3034 Spacer:
7T-3040 Shim:
7T-3041 Shim:
7T-3042 Shim:
7T-3043 Shim:
NOTE: Install thickest shim closest to bearing and thinnest next to spacer 7T-3045.
7T-3045 Spacer:
6T-9163 Shim:
6T-9164 Shim:
6T-9165 Shim:
6T-9166 Shim:
NOTE: Install thickest shim closest to bearing and thinnest next to spacer 7T-2646.
7T-2646 Spacer:
(4) Tighten reverse idler shaft nut to a torque of ... 135 ± 7 N·m (100 ± 5 lb ft)
(5) 6Y-1341 Detent Spring for shift rods (not shown):
Thickness of six new discs and seven new plates for forward and reverse clutch ... 24.28 to 25.94 mm
(.956 to 1.02 in)
Thickness of one new 6Y-7929 Disc ... 1.97 to 2.13 mm (.078 to .084 in)
Thickness of one new 6T-9194 Plate ... 1.78 to 1.88 mm (.070 to .074 in)
Clearance of the clutch assembly (between backup plate and ring retainer) is ... 3.81 to 5.72 mm (.150
to .225 in)