The document provides heat of polymerization data for ethylene and propylene monomers in different states when polymerized at 25 degrees Celsius. It shows that ethylene has the highest heat of polymerization of 925 kcal/kg when polymerized from gas to a crystalline or partially crystalline solid state. Propylene has a maximum heat of polymerization of 593 kcal/kg under the same conditions. The data is presented to compare the heat released during polymerization of different monomers depending on their starting and ending physical states.
The document provides heat of polymerization data for ethylene and propylene monomers in different states when polymerized at 25 degrees Celsius. It shows that ethylene has the highest heat of polymerization of 925 kcal/kg when polymerized from gas to a crystalline or partially crystalline solid state. Propylene has a maximum heat of polymerization of 593 kcal/kg under the same conditions. The data is presented to compare the heat released during polymerization of different monomers depending on their starting and ending physical states.
The document provides heat of polymerization data for ethylene and propylene monomers in different states when polymerized at 25 degrees Celsius. It shows that ethylene has the highest heat of polymerization of 925 kcal/kg when polymerized from gas to a crystalline or partially crystalline solid state. Propylene has a maximum heat of polymerization of 593 kcal/kg under the same conditions. The data is presented to compare the heat released during polymerization of different monomers depending on their starting and ending physical states.
The document provides heat of polymerization data for ethylene and propylene monomers in different states when polymerized at 25 degrees Celsius. It shows that ethylene has the highest heat of polymerization of 925 kcal/kg when polymerized from gas to a crystalline or partially crystalline solid state. Propylene has a maximum heat of polymerization of 593 kcal/kg under the same conditions. The data is presented to compare the heat released during polymerization of different monomers depending on their starting and ending physical states.
MO 885 240 0.271186 Grease 860 80 0.093023 0.478495 1 ratio 2.089884 max cat 167.1907 Heat of polymerization State Monomer Heat of polymerization (25 deg.C) kcal/kg Monomer Polymer Ethylene Gas Gas 798 Gas Crystal or partial crystal 925 Gas Condensed amorphous 865 Liquid Crystal or partial crystal 846 Propylene Gas Gas 493 Gas Crystal or partial crystal 593 Liquid Crystal or partial crystal 501