Professional Documents
Culture Documents
Simatic Hmi Wincc V7.3 Se Incl. Update 1 Wincc/Webux - Documentation
Simatic Hmi Wincc V7.3 Se Incl. Update 1 Wincc/Webux - Documentation
___________________
2
___________________
How to use WebUX
SIMATIC HMI
System Manual
09/2014
A5E34377167-AB
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
WinCC/WebUX - Documentation
System Manual, 09/2014, A5E34377167-AB 3
Table of contents
WinCC/WebUX - Documentation
4 System Manual, 09/2014, A5E34377167-AB
WebUX - Overview 1
Overview
WinCC WebUX provides a solution for device- and browser-independent operator control
and monitoring of the automation system. Only secure HTTPS connections with SSL
certificates are possible for the communication.
WinCC V7.3 SE including Update 1 initially supports restricted functionality for mobile
devices. Some Graphics Designer objects are not supported. Global Scripting is supported
without access to the graphics system; screen-local scripting is not supported.
WebUX WebNavigator
Based on generally established web standards Based on ActiveX technology from Microsoft
Can be used with any browser Only supports Microsoft Internet Explorer
Can be used for a large number of devices regardless of the operating Can only be used with Windows computers
system, for example, tablets, computers and smartphones
Does not require a client installation Requires a client installation
Standard user rights are sufficient Requires administrator rights for installation
Visualization in WebUX
WinCC pictures and the supported WinCC controls are displayed in the Web browser with
the "HTML5" and "SVG" standards:
● The graphic elements are created with SVG elements.
● The dynamic updating of the process picture is performed via a permanent connection
between the browser and server.
Note
Browser-dependent display is occasionally possible
Minor differences in display and behavior are possible for the different browser versions.
WinCC/WebUX - Documentation
System Manual, 09/2014, A5E34377167-AB 5
WebUX - Overview
WinCC/WebUX - Documentation
6 System Manual, 09/2014, A5E34377167-AB
WebUX - Overview
WinCC/WebUX - Documentation
System Manual, 09/2014, A5E34377167-AB 7
WebUX - Overview
WinCC/WebUX - Documentation
8 System Manual, 09/2014, A5E34377167-AB
WebUX - Overview
WinCC/WebUX - Documentation
System Manual, 09/2014, A5E34377167-AB 9
WebUX - Overview
Licensing
The WinCC/WebUX basic package with an integrated WinCC WebUX Monitor license are
already included in WinCC.
The licensing packages are as follows and run in parallel on the WinCC/WebUX server:
● WinCC WebUX Monitor: User has read-only access
● WinCC WebUX Operate: User has read and write access
The licensing packages are available with 1, 5, 10, 50 and 100 clients. The packages are not
version-dependent and can be combined with each other.
WinCC/WebUX - Documentation
10 System Manual, 09/2014, A5E34377167-AB
How to use WebUX 2
Introduction
To be able to use WinCC WebUX on end devices, you first need to configure WebUX and
the WinCC project.
Requirement
● Microsoft Internet Information Service (IIS) is installed.
● The WinCC basic system is installed.
● The "WinCC WebUX" program package is installed.
● The "WinCC WebUX" license is installed.
WinCC/WebUX - Documentation
System Manual, 09/2014, A5E34377167-AB 11
How to use WebUX
WinCC/WebUX - Documentation
12 System Manual, 09/2014, A5E34377167-AB
How to use WebUX
Requirement:
● A "WinCC WebUX" license is installed on the server.
● The WinCC project is in Runtime.
Procedure:
1. Go to the address bar of the browser and enter the address "https://<server name>" of
the WebUX server.
If you are not using the standard port, the port number needs to be added to the URL,
e.g. "https://<server name>:<port number>".
If you are using a virtual directory instead of a web page, the name of the virtual web
folder needs to be added to the URL, e.g. "https://<server name>/<directory name>".
2. Type in the user name and password.
Note
The IIS on Windows 7 supports a maximum of 10 connections or instances. If the limit is
exceeded, you can no longer operate the instances already connected.
WebUX requires more than one connection at the time. This means a maximum of 3 or 4
WebUX clients can connect under Windows 7. You should generally use a server operating
system for such Web applications.
WinCC/WebUX - Documentation
System Manual, 09/2014, A5E34377167-AB 13
How to use WebUX
WinCC/WebUX - Documentation
14 System Manual, 09/2014, A5E34377167-AB
Index
W
WebUX
Configuring the WebUX web page, 11
Licensing, 5
Overview, 5
Using WebUX, 11
WinCC/WebUX - Documentation
System Manual, 09/2014, A5E34377167-AB 15
Index
WinCC/WebUX - Documentation
16 System Manual, 09/2014, A5E34377167-AB