This document provides specifications for two non-API centrifugal pumps required for a raw water package project in Viramgam Terminal. The pumps will operate in parallel and are needed to pump filtered water at a rated capacity of 12.5 cubic meters per hour against a discharge pressure of 70 meters and a maximum temperature of 65 degrees Celsius. The pumps will be Model ET ISO 3A manufactured by M&P with a rated power of 6.27 kW each. Materials of construction include cast iron, bronze, carbon steel, and stainless steel. Shop tests, material certifications, and hydrostatic and performance tests will be required.
This document provides specifications for two non-API centrifugal pumps required for a raw water package project in Viramgam Terminal. The pumps will operate in parallel and are needed to pump filtered water at a rated capacity of 12.5 cubic meters per hour against a discharge pressure of 70 meters and a maximum temperature of 65 degrees Celsius. The pumps will be Model ET ISO 3A manufactured by M&P with a rated power of 6.27 kW each. Materials of construction include cast iron, bronze, carbon steel, and stainless steel. Shop tests, material certifications, and hydrostatic and performance tests will be required.
This document provides specifications for two non-API centrifugal pumps required for a raw water package project in Viramgam Terminal. The pumps will operate in parallel and are needed to pump filtered water at a rated capacity of 12.5 cubic meters per hour against a discharge pressure of 70 meters and a maximum temperature of 65 degrees Celsius. The pumps will be Model ET ISO 3A manufactured by M&P with a rated power of 6.27 kW each. Materials of construction include cast iron, bronze, carbon steel, and stainless steel. Shop tests, material certifications, and hydrostatic and performance tests will be required.
This document provides specifications for two non-API centrifugal pumps required for a raw water package project in Viramgam Terminal. The pumps will operate in parallel and are needed to pump filtered water at a rated capacity of 12.5 cubic meters per hour against a discharge pressure of 70 meters and a maximum temperature of 65 degrees Celsius. The pumps will be Model ET ISO 3A manufactured by M&P with a rated power of 6.27 kW each. Materials of construction include cast iron, bronze, carbon steel, and stainless steel. Shop tests, material certifications, and hydrostatic and performance tests will be required.
1 Project : Raw Water Package Item No.: 1163-PU-009A/S 2 Owner : Service: Filtered Water pump 3 No. Reqd: 2 Nos 1W 1 Standby Parallel Operation Required: Yes No 4 Applicable to Proposal Purchase As Built 5 Scope option & Information specified by purchaserInformation Reqd. from & option left to Vendor. Vendor to cross selection 6 Driver: Working Standby Driver Supplied & Mounted By: Pump Mfr. Other
7 Liquid Handled Water Capacity (m3/hr): Min/Nor/Rated: 12.5
8 Pumping Temp. ( 0C) Normal Ambient Max 65 Deg Cent. Discharge Pressure (kg/cm2,A): 9 Specific Gravity at P.T./150C Suction Pressure: Nor./Max. (kg/cm2,A): 10 Vapour Pressure at P.T. (kg/cm2,A): Diff. Pressure: (kg/cm2)@ Rated Capacity: 11 Viscosity at P.T. (cP/cst): Corr./Eros. By: Diff. Head (mlc) @ Rated Capacity: 70 12 Solid suspension Yes No Size % NPSH Available (mlc): MANUFACTURES SPECIFICATIONS 13 Pump Manufacturer: M&P Model No.: ET ISO 3A 14 CONSTRUCTION PERFORMANCE 15 Pump Type : OH 2 OH 6 OTHERS Proposal Curve No. 16 Casing Mounting: Centerline Foot Inline Visc.Corr.Factor: N.A. Ch CQ CH 17 Casing Split: Axial Radial NPSH Reqd. (water) (m): 5 F/L Speed (rpm): 2885 18 Casing Type: Single Volute double Volute Diffuser No.of stages: 1 Efficiency (%): 40 19 Casing Connection: Vent Drain Gauge Rated BKW(0% Tol.): 6.27 KW kW max.BKW rtd.Imp.: 7.4 20 Nozzles Size ANSI Rating Facing Position BKW @ MCF ( η 1.0): kW Rec.Driver Rating: (kW) 7.5 21 Suction 50 MM B 16.5 150 # R.F. SIDE Max.head rtd imp.(m): 76 Cap@BEP(m 7 22 Discharge 32 MM B 16.5 150 # R.F. TOP MCF (m3/hr): Stable 2.3 Thermal 23 lmp. Dia. in mm Maxi 234 198Rated-230Rated 230 CLOSED Min198 M.A.W.P @15 C/P.T./DesignTemp.(kg/cm ,G): 0 2 12 24 Brg.:Type/No.: Radial: 6306 Thrust: 6306 NR Lub: GREASE Hydrostatic Test Pressure (kg/cm2,G): 10.5 25 Cplg.: Make/Type: Fleximetl w spacer & Nonspark Guard yes No Rotation facing coupling end: CW CCW 26 Driver Half cplg. Mounted by: Pump Mfr. Others Specific Speed 27 Packing Type: N.A Size: No.of rings: Suction Specific speed 28 Mech.Seal: Make Model: 80 U -LEAKPROOF MAKE API Code: Impeller tip speed DURING DETAIL ENGINEERING 29 Base Plate Drain Rim Type: Yes Fdn,Bolts: Yes No Seal flush/ Quench Plan: PLAN-11 Material: 30 Throat Bush: Yes No Matl: Bal. Device: Yes No Ext. seal flush fluid: N.A. LPM: @kg/cm2G/ 0C 31 Materials (As per PDS): MOC ASTM Grades Seal Barrier fluid: N.A. LPM: @kg/cm2G/ 0C 32 I - Cast Iron Casing I Ext. quench fluid: N.A. LPM: @kg/cm2G/ 0C 33 B - Bronze Impeller I C.W. Plan: N.A. LPM: @kg/cm2G/ 0C 34 S - Carbon Steel Inner Case Parts N.A. Weight (kg):Pump+Base+Coupling 90 Kgs. Driver: 45 Kgs. 35 C - 11-13 % Chr. Stl. Sleeve Packed C AUXILIARY PIPING INTERFACE CONNECTIONS 36 h - Hardened Sleeve Seal N.A. (All interface conn. Shall be termntd.with a flng. Block valves) 37 f - Faced Casing Ring H-BHN 50 BHN Size Ratings(ANSI) Facing 38 K -SS 304 Impeller Ring 50(min) N.A. Latern Ring Inlet/Outlet 39 L - SS 316 Shaft S Ext. Seal flush fluid Inlet/Outlet 40 X Throttle Bush N.A. Seal Quench fluid Inlet 41 Y Throttle Bush N.A. Seal pot vent/drain 42 Z Balance Drum N.A. Casing vent/drain 43 Maximum Sound Pressure level (dBA): 805 DBA @ 3 MET. C.W Inlet/ Outlet 44 Driver suitable for Pump starting with open Disc. Valve condition Base plate drain (only flanged) 45 Casing steam jacket INSPECTION & TESTS ( EACH PUMP ) 46 Witness Observe Witness Observe 47 Shop Test / Inspection NPSH As Reqd. Per Spec. Mandatory 48 Material Certificates 49 Hydrostatic 50 Performance/Sound Level 51 52 REMARKS:- 1) Max. allowable casing working pressure shall not be less than ……….. kg/cm2G @ …………. 0C 53 2) Typical Data Sheet for Centrifugal Pumps. Please refer to Process Data Sheet (PDS) for operating conditions and other design requirements. 54 3)Contractor to fill separate datasheet for each application and submit the same with unique document nos. 55 56