Professional Documents
Culture Documents
Bullard magma-ER - ALL - CATALOG - AM - EN - LOW - 8224
Bullard magma-ER - ALL - CATALOG - AM - EN - LOW - 8224
Product Catalog
About Bullard
Information
Now there are more ways than ever to place an
order with Bullard!
Fax
Y ou can fax us any time – 24 hours a day. Faxed orders
are processed promptly, and you will receive a Sales
Order Confirmation back after the order has been
entered into our system.
Toll-Free Fax Number: 1-800-877-6858
Local Fax Number: 1-859-234-6858
E-mail
E-mail your orders to orders@bullard.com.
EDI
T ransaction sets are received as soon as they are sent, so
the response turnaround is almost immediate. You can even
use your own part numbers! Contact edi@bullard.com if
you wish to become an EDI partner. NOTE: There is a $100
purchase order minimum.
Mail
S end orders via mail to Bullard Customer Service if you
have an account set up with us. The mailing address for
Bullard is below.
In Person
Y our Bullard Regional Sales Manager will visit your facility
and listen to your needs. They can help you decide on
the combination of safety products that will best serve
you and provide a quote, technical information, product
availability, and ordering information.
C all us anytime between 8:00 a.m. and 6:00 p.m. EST,
Monday through Friday, and one of our experienced
Customer Service Representatives will assist you with
placing your order. Special order requirements? Just
contact a Bullard Customer Service Representative to
discuss the options. We do not take orders over the phone;
you must e-mail or fax a copy of the purchase order.
www.bullard.com 3
Table of Contents Table of
Contents
About Bullard................................................................................................................................... 2
Contact & Ordering Information......................................................................................................... 3
Thermal Imaging......................................................................................................................... 5-52
Thermal Imagers: Fire Service................................................................................................ 5-14
T4MAX..................................................................................................................................6
T4N......................................................................................................................................7
T320....................................................................................................................................8
T3MAX..................................................................................................................................9
Eclipse® LD......................................................................................................................... 10
Eclipse®............................................................................................................................. 11
TI Spotlight: Electronic Thermal Throttle®................................................................................ 12
TI Spotlight: Super Red Hot................................................................................................... 13
TI Spotlight: Save-A-Life Program........................................................................................... 14
Thermal Imagers: Law Enforcement........................................................................................15-20
Edge™................................................................................................................................ 16
TacSight® SE35.................................................................................................................... 17
TI Spotlight: White-Hot/Black-Hot/Nocturnal Mode................................................................... 18
TI Spotlight: SOAR Program................................................................................................... 19
TI Spotlight: Service, Training & Warranty................................................................................ 20
Thermal Imagers: Accessories & Parts....................................................................................21-52
Replacement Parts Reference Table..................................................................................... 22-23
Transmitter, Receiver & DVR.............................................................................................. 24-26
Accessories.................................................................................................................... 27-30
Kits & Bundles................................................................................................................ 30-32
Extended Warranties........................................................................................................ 32-35
Upgrades....................................................................................................................... 36-38
Replacement Parts........................................................................................................... 39-47
Retired Thermal Imager Accessories & Parts......................................................................... 48-52
Fire & Rescue Helmets...............................................................................................................53-128
Structural Fire Helmets.........................................................................................................53-84
UST Series...................................................................................................................... 54-57
UST Series Accessories & Replacement Parts........................................................................ 58-64
FH Spotlight: NFPA Standards................................................................................................. 65
FX Series................................................................................................................... 66-67, 70
PX Series....................................................................................................................... 68-70
FX/PX Series Accessories & Replacement Parts..................................................................... 71-76
FH Spotlight: What Goes Into a Bullard Fire Helmet?.................................................................. 77
LT Series........................................................................................................................ 78-80
LT Series Accessories & Replacement Parts.......................................................................... 81-84
Air Rescue/Fire Fighting Helmets..........................................................................................85-91
AX................................................................................................................................ 86-89
AX Accessories & Replacement Parts................................................................................... 90-91
Wildland Fire Helmets........................................................................................................92-100
Wildfire® Series............................................................................................................... 93-95
Wildfire® Series Accessories & Replacement Parts................................................................96-100
Rescue/ER Fire Helmets....................................................................................................101-112
USRX.......................................................................................................................... 102-103
USRX Series Accessories & Replacement Parts................................................................... 104-107
Advent® Series............................................................................................................ 108-109
Advent® Series Accessories & Replacement Parts............................................................... 110-112
European Style Fire Helmets.............................................................................................113-114
Magma™ Series Accessories & Replacement Parts..................................................................... 114
Helmet Ornamentation.....................................................................................................116-124
Leather Front Styles...................................................................................................... 116-118
Leather Front Badges & Decals............................................................................................. 119
Scotchlite® Letters & Numbers............................................................................................. 120
Front Decals................................................................................................................ 121-122
Crescent Lettering.............................................................................................................. 123
Ceremonial Plaques............................................................................................................. 124
Body Temperature Protection............................................................................................125-127
Index....................................................................................................................................129-131
4 877-BULLARD
Thermal Imagers:
Fire Service
Thermal Imagers:
Fire Service
In This
Section
• T4MAX
• T4N
• T320
• T3MAX
• Eclipse® LD
• Eclipse®
877-BULLARD
Thermal Imaging
T4MAX
T4MAX
highlights:
• Super-bright display enables viewing in thick smoke • Direct charge system for use with vehicle mounted charger
and direct sunlight • Battery charger with AC adaptor
• 450:1 Contrast Ratio emphasizes deep blacks, bright • Combination wrist strap and gear strap
whites, and enhances image detail • Carrying case
• Palm-size thermal imager • Product orientation CD-ROM with SmartLine training
features:
1. 4.3” widescreen format Liquid Crystal Display
2. Technology Optimization Package (T.O.P.)
3. Ultra-high 320 x 240 resolution
4. 16 x 9 display aspect ratio
5. Super Red Hot Colorization
6. Electronic Thermal Throttle®
7. Relative heat indicator for surface
temperature measurement
8. 2x and 4x digital zoom
9. Two 10 Volt NiMH rechargeable batteries
10. Standard housing color is Metallic Blue
Available accessories: REPLACEMENT PARTS:
Transmitters/Digital Video Recorders (p 25-26): (See table on p 22-23)
SS, SSTRANS2, SSTRANS2UPGRADE, SSUPGRADE,
T3TRANSONLY2, T3TRANSUPGRADE Kits & bundles:
Receivers (p 24-25): (p 31)
ML1, ML2, MLUPGRADE, REC2, RECUPGRADE T4MAXBUNDLE, T4MAXBUNDLESS
Additional Accessories (p 27-29):
ACINVERTER, Hardcase, POWERHOUSE, POWERHOUSEKIT,
available warranties:
T3ALK, T3HANDLE, T3RETRACT, T4GLARESHIELD (p 32-35)
T4MAXEXT, T4MAXEXT2, T4MAXCF, T4MAXCFAM
T4N
Meeting all requirements of NFPA 1801-2013, the
T4N gives you the extra assurance of maximum
durability and performance. With all these
benefits, the T4N is the ultimate choice for
firefighting thermal imaging.
highlights:
• Super-bright display enables viewing in thick smoke • NFPA 1801-2013-compliant
and direct sunlight • Class I, Division 2 rated for use in hazardous locations
• 450:1 Contrast Ratio emphasizes deep blacks, • Two operational modes: BASIC and BASIC PLUS (for
bright whites, and enhances image detail full feature performance)
• Palm-size thermal imager • Intuitive and easy battery change
features:
1. 4.3” widescreen format Liquid Crystal Display
2. Technology Optimization Package (T.O.P.)
3. Ultra-high 320 x 240 resolution
4.
5.
16 x 9 display aspect ratio
Super Red Hot Colorization
6. Electronic Thermal Throttle®
7. Relative heat indicator and numeric indicator
for surface temperature measurement
8. 2x and 4x digital zoom
9. Two 10 Volt NiMH rechargeable batteries
10. Standard housing color is Black
Available accessories*: REPLACEMENT PARTS:
Transmitters/Digital Video Recorders (p 25-26): (See table on p 22-23)
SS, SSTRANS2, SSTRANS2UPGRADE, SSUPGRADE,
T3TRANSONLY2, T3TRANSUPGRADE Kits & bundles:
Receivers (p 24-25): (p 31)
ML1, ML2, MLUPGRADE, REC2, RECUPGRADE T4NBUNDLE, T4NBUNDLESS
Additional Accessories (p 27-29):
ACINVERTER, hardcase, POWERHOUSE, POWERHOUSEKIT,
available warranties:
T3ALK, T3HANDLE, T3RETRACT, T4GLARESHIELD (p 32-35)
*Attachable accessories are not NFPA 1801-2013-compliant. T4NEXT, T4NEXT2, T4NCF, T4NCFAM
www.bullard.com 7
Thermal Imaging
T320
T320
highlights:
• Lightweight, palm-size thermal imager • Battery charger with AC and DC adaptors
• Single button operation (standard configuration) • Combination wrist strap and gear strap
• Direct charge system for use with Powerhouse • Carrying case
vehicle mounted charger • Product orientation CD-ROM with SmartLine training
features:
1. 3.5” Liquid Crystal Display
2. Ultra-high 320 x 240 resolution detector
3. Super Red Hot Colorization
4. Relative heat indicator for surface
temperature measurements
5. Two 10 Volt NiMH rechargeable batteries
6. OPTIONAL Electronic Thermal Throttle® (T320TT)
7. Standard housing color is Yellow
Available accessories: REPLACEMENT PARTS:
Transmitters/Digital Video Recorders (p 25-26): (See table on p 22-23)
SS, SSTRANS2, SSTRANS2UPGRADE, SSUPGRADE,
T3TRANSONLY2, T3TRANSUPGRADE Kits & bundles:
Receivers (p 24-25): (p 30-31)
ML1, ML2, MLUPGRADE, REC2, RECUPGRADE T320BUNDLE, T320TTBUNDLE, t320bundless, t320ttbundless
Additional Accessories (p 27-29):
ACINVERTER, hardcase, POWERHOUSE, POWERHOUSEKIT,
available warranties:
T3ALK, T3GLARESHIELD, T3HANDLE, T3RETRACT (p 32-34)
T320EXT, T320EXT2, T320TTEXT, T320TTEXT2
T3MAX
T3MAX is an extremely versatile small form thermal
imager for fire departments that demand high
performance thermal imaging on a budget. The
standard one-button model is suited for interior
operations, while the addition of the Electronic
Thermal Throttle® makes T3MAX a powerful
analytical tool. T3MAX is the ideal thermal imager
for departments that want complete versatility at
an affordable price.
highlights:
• Lightweight, palm-size thermal imager • Battery charger with AC adaptor
• Single button operation (standard configuration) • Combination wrist strap and gear strap
• Direct charge system for use with Powerhouse • Carrying case
vehicle mounted charger • Product orientation CD-ROM with SmartLine training
features:
1. 3.5” Liquid Crystal Display
2. 160 x 120 resolution detector
3. Super Red Hot Colorization
4. Relative heat indicator for surface
temperature measurements
5. Two 10 Volt NiMH rechargeable batteries
6. OPTIONAL Electronic Thermal Throttle® (T3MAXTT)
7. Standard housing color is Red
Available accessories: REPLACEMENT PARTS:
Transmitters/Digital Video Recorders (p 25-26): (See table on p 22-23)
SS, SSTRANS2, SSTRANS2UPGRADE, SSUPGRADE,
T3TRANSONLY2, T3TRANSUPGRADE Kits & bundles:
Receivers (p 24-25): (p 31-32)
ML1, ML2, MLUPGRADE, REC2, RECUPGRADE T3MAXBUNDLE, T3MAXTTBUNDLE, t3maxbundless, t3maxttbundless
Additional Accessories (p 27-29):
ACINVERTER, hardcase, POWERHOUSE, POWERHOUSEKIT,
available warranties:
T3ALK, T3GLARESHIELD, T3HANDLE, T3RETRACT (p 34-35)
T3MAXEXT, T3MAXEXT2, T3MAXTTEXT, T3MAXTTEXT2
www.bullard.com 9
Thermal Imaging®
Eclipse LD
Eclipse® LD
highlights:
• Lightweight, at only 2 lbs • Battery charger with AC adaptor
• Combines large display and compact design • myBullard™ personal control panel
• Direct charge system for use with Eclipse® • Product orientation CD-ROM with SmartLine training
Powerhouse vehicle mounted charger
features:
1. 3.5” Liquid Crystal Display
2. 160 x 120 resolution or upgrade to 320 x 240
3. Super lightweight and ultra small form
4. More than 1000°F saturation temperature
5. One 2.4 Volt NiMH battery
6. Customizable startup graphic
7. OPTIONAL Electronic Thermal Throttle®
8. OPTIONAL surface temperature measurement
9. OPTIONAL Super Red Hot Colorization
10. OPTIONAL SceneCatcher DVR
11. Standard housing color is Red
Eclipse®
Eclipse® is designed to equip each firefighter
with thermal imaging technology. Shattering
price barriers, Eclipse® gives fire departments
of all sizes the opportunity to bring thermal
imaging to more firefighters. With Eclipse®, no
one is left in the dark.
highlights:
• Ultra-lightweight at 1.5 lbs • Battery charger with AC adaptor
• Sleek and compact design • Eclipse® control panel software
• Direct charge system for use with Eclipse® • Product orientation CD-ROM with SmartLine training
Powerhouse vehicle mounted charger
features:
1. 2.4” Liquid Crystal Display
2. 80 x 60 resolution (Eclipse®) or upgrade to
160 x 120 (Eclipse® 160)
3. Super lightweight and ultra small form
4. More than 1000°F saturation temperature
5. One 2.4 Volt NiMH battery
6. Customizable startup graphic
7. OPTIONAL Electronic Thermal Throttle®
8. OPTIONAL surface temperature measurement
9. OPTIONAL High Heat Colorization
10. Standard housing color is Red
www.bullard.com 11
Thermal Imaging
Spotlight
TI Spotlight
Electronic
thermal throttle®
Pinpoints Hot Spots; Highlights the Hottest Objects
Inside the Thermal Imager
The patented Electronic Thermal Throttle® from
Bullard greatly improves the usability of thermal
imagers in overhaul. Because the sensitivity of the
imager is automatically controlled by the circuitry
inside the TI, the fact that the user has no control
over its adjustment has traditionally made overhaul
difficult. Most thermal imagers change sensitivity
when they view areas of significant heat. In a fire
room, post-knockdown, the software is unable to
select the proper sensitivity level for the heated
room. As a result, traditional thermal imagers have
shown the room with an over-abundance of white, or
as many areas of gray. Firefighters could not easily
pinpoint areas of concern.
Colorization
The Electronic
Thermal Throttle®
solves this
dilemma. When
the firefighter uses
Electronic Thermal
Throttle®, the
thermal imager
paints the hottest
objects in the scene blue, leaving other hot objects
white. By holding down the proper switch, the
temperature for blue colorization is lowered and more
objects are painted blue. The hottest items are dark
blue, with lighter shades of blue representing slightly
cooler items.
This blue colorization can help a firefighter identify
which portion of a wall is hotter than the rest,
enabling him to focus his initial overhaul efforts. The
feature can also help a firefighter identify fluorescent
light ballasts or other electrical equipment that
is overheated and causing an odor of smoke. By
highlighting the heat from a human, it stands out
from the background heat of the area being searched.
Electronic Thermal Throttle® might also help rescuers
involved in an exterior search and rescue operation.
Electronic Thermal Throttle® comes standard on the
T4 Series and as an option for the T3 and Eclipse®
Series thermal imagers.
TI Spotlight
Super Red Hot
Determines Heat Conditions; Helps You Identify instead of yellow. The orange transitions to red at 1,000ºF
Dangerous Temperatures (538ºC), and any object over about 1,120ºF (600ºC) will
be solid red. During fire suppression, in situations where
Inside the Thermal Imager the seat of the fire is not easily identified, the Super Red
Bullard first introduced Red Hot Colorization in 2000. Hot system should colorize the greatest density of fire as
Since then, colorization has become common on higher red. This can help with hose placement, as well as proper
performance microbolometer-based thermal imagers. aiming of streams.
Super Red Hot uses three color levels to help firefighters While the thermal imager normally only sees surface
identify dangerous temperatures. The software that creates temperatures, superheated gases have special properties
these colors also incorporates special logic that allows it that make them visible on a thermal imager. Previously,
to shade in and show details behind the color. As a result, users of microbolometers had to look for faint white
it is one of the few colorization systems that actually clouds in the thermal image to determine where the
gives depth and texture to the image, allowing firefighters thermal layer may be. Since these gases frequently give a
to see structural details within the area being colored. In high heat signature to the TI, the Super Red Hot feature
short, the color in Super Red Hot from Bullard does not will normally colorize thermal layers in shades of yellow or
obscure details like some other color systems. orange. This can help new users or less experienced users
identify the thermal layer more rapidly, and potentially
Colorization make better decisions about how far to advance or how
Bullard Super Red Hot
quickly to ventilate a structure.
uses yellow, orange,
and red colors to Temperatures indicated by the Super Red Hot Colorization
indicate increasing are estimations, as with the relative heat indicator. A
levels of heat (and number of factors, most importantly the type of material,
danger). Objects that affect the accuracy of the estimation. In general, if you
the thermal imager can “see” a gas layer on your TI, even if it is white and
estimates at 500ºF not colorized, treat it as a superheated layer. Super Red
(260ºC) or hotter Hot comes standard on the Bullard T4 and T3 Series
are colored in shades of yellow. At 800ºF (427ºC), the thermal imagers and as an option on Eclipse® Series
thermal imager begins to color objects shades of orange thermal imagers.
www.bullard.com 13
Thermal Imaging
Spotlight
TI Spotlight
Save-a-life club
The Bullard Save-A-Life Club is a reward and
recognition program for firefighters who save a
civilian life or escape a life-threatening situation
while using a Bullard Thermal Imager.
Fire departments inducted into the Bullard Save-A-Life
Club are honored with a local award ceremony, at which
rescuers receive distinctive military-style medals
mounted in personalized display boxes, along with
service ribbons, certificates, and uniform patches
that commemorate the life-saving event. Department
leaders, local funding leaders, and TI trainers receive
personalized recognition gifts as well. Members of the
local media are invited to cover the event.
If firefighters in your department have saved a life
while using a Bullard TI, be sure to submit your story
for proper recognition.
Visit www.bullard.com to submit a nomination, see a
list of previous recipients, and find more information.
In This
Section
• Edge™
• TacSight® SE35
www.bullard.com
Thermal Imaging
Edge ™
highlights:
• Ultra-lightweight at only 1.5 lbs • Pelican™ hard carrying case with unconditional
• Sleek and compact design lifetime guarantee
• Direct charge system for use with Eclipse® • myBullard™ personal control panel
Powerhouse vehicle mounted charger
• Battery charger with AC adaptor and AC invertor for
in-vehicle charging
features:
1. 2.4” Liquid Crystal Display
2. 80 X 60 resolution (Edge™) or upgrade to
160 X 120 (Edge™ 160)
3. Super lightweight and ergonomically designed
4. 20° field of view
5. Display Dimming/Display Off Mode
6. Video Polarity (White-Hot/Black-Hot/Nocturnal)
7. Fixed Focus, Auto Gain
8. Two 2.4 Volt NiMH batteries
Available accessories: available warranties:
(p 27): (p 33)
ACINVERTER, ECLGLARESHIELD, ECLPOWERHOUSE, ECLRETRACT EDGEEXT, EDGEEXT2
REPLACEMENT PARTS:
(See table on p 22-23)
TacSight® SE35
the industry. It detects extremely small differences
in temperature so officers can distinguish people
from their immediate surroundings. You’ll find
optimal visibility and advanced features like 4x
digital zoom, Reverse Polarity, and Variable Focus
with the TacSight® SE35.
highlights:
• Superior image quality for surveillance operations • Shoulder strap
• Powerful standard features • Pelican™ hard carrying case with unconditional
• 1000 meter human detection lifetime guarantee
• Palm-size thermal imager
• Battery charger with AC adaptor and AC inverter for
in-vehicle charging
features:
1. Human detection at 1000 meters
2. 13° field of view
3. 320 x 240 resolution
4. Display Dimming/Display Off Mode
5. Reverse Polarity - “white hot” to “black hot”
6. Image enhancement button
7. Variable Focus
8. 2x and 4x digital zoom
9. Two 10 Volt NiMH rechargeable batteries
Available accessories: REPLACEMENT PARTS:
Transmitters/Digital Video Recorders (p 24-26): (See table on p 22-23)
HANDLETRANSONLY2, HANDLETRANSUPGRADE, TACSS, TACSSTRANS2,
TACSSTRANS2UPGRADE, TACSSUPGRADE Kits & bundles:
Receivers (p 24-25): (p 32)
ML1, ML2, MLUPGRADE, REC2, RECUPGRADE TACSIGHTSE35KIT, TACSIGHTSE35KIT2
Additional Accessories (p 27-30): available warranties:
HANDLE, HARDCASE, RCN17ALK, T3GLARESHIELD, T3RETRACT,
TACPORT, TACSCOPE (p 33)
SE35EXT
www.bullard.com 17
Thermal Imaging
Spotlight
White-Hot,
TI Spotlight
Black-Hot &
Nocturnal MODE
Edge™ can be switched from the standard
white-hot polarity to black-hot polarity.
Powerful, Intuitive Operation
The reverse polarity feature of the Edge enables
officers to quickly adjust the thermal image to
display the maximum detail. Switching polarity can
help reveal scene details depending on the situation
and environment. Officers have the option to toggle White-Hot Mode
between White-Hot and Black-Hot Modes to select the
setting that offers the optimal display.
When activating the unique Nocturnal Mode, which colors
the image red, users’ eyes adjust faster when looking
away from the display in low light conditions, allowing
officers to quickly acclimate to the environment.
Black-Hot Mode
Nocturnal Mode
TI Spotlight
recognition Program
The Bullard SOAR (Save or Apprehension
Recognition) Program is a reward and recognition
program for law enforcement officers who have
apprehended a felon or suspect or have saved the
life of a civilian or fellow officer while using a
Bullard Thermal Imager.
Law enforcement agencies inducted into SOAR are
honored during a local award ceremony, where officers
receive distinctive challenge coins mounted in
presentation cases to commemorate the effectiveness
of using a Bullard Edge™ or TacSight® Thermal Imager
in an incident. Members of the local media are invited
to cover the event.
Visit www.bullard.com to submit a SOAR application
for recognition, see a list of current members, and
find more information.
www.bullard.com 19
Thermal Imaging
Spotlight
Service, training &
TI Spotlight
warranty
Bullard Service Commitment and law enforcement officers in a full-time training
Since Bullard introduced its first thermal imager in 1998, capacity. These experienced trainers consistently offer
the Company has been earning the respect and trust of instructional materials that aid users in their applications.
its customers through its commitment to excellence in With your new Bullard Thermal Imager, your department
service. All thermal imaging customers who send their can receive hands-on training, classroom thermal imaging
products in for service or maintenance will receive: education, helpful take-away materials, and informative
• Up-front pricing question-answer sessions. Bullard thermal imaging
• 48-hour turnaround training is more than simple how-to instructions. It’s
• Complete system diagnostics real-life, interactive, and customized for the needs of
• Free inbound and outbound shipping your department.
• A lifetime warranty for shell replacements Visit www.bullard.com to find training articles, lessons
learned, and other training resources.
Bullard Service Approach
The Bullard Service Program consists of several elements: Warranty
• Simple pricing based on market price tiers, Bullard provides multiple warranty options for departments
communicated to the customer before the product is to consider. Bullard’s standard warranty covers all thermal
sent to Bullard imagers and certain features and accessories for a period
• Pre-authorization of all TI service returns, for of one year, and the limited lifetime housing warranty
transaction efficiency and speed of turnaround guarantees the thermal imager outer shell for the life of
• E-mail communication to customer upon repair the imager. Additionally, Bullard’s exclusive CareFree™
delivery and pickup from Bullard warranty provides five-year coverage for select thermal
• Prepaid inbound and outbound shipping for all imagers and batteries. Conditions and exclusions apply.
thermal imagers, regardless of warranty status For details on Bullard’s available warranties and their
• Complete system diagnostics on every camera serviced
terms and conditions, go to www.bullard.com/TIwarranty
• Complimentary replacement of straps and display
cover window on all repairs
• Lifetime warranty for shell replacements
Keeping Your TI in Top Condition
The Preventative Maintenance Program at Bullard allows
a fire department to return its thermal imager to “like
new” condition, replacing maintenance parts, providing a
complete diagnostic of the thermal imager, and replacing
the outer housing and straps. Especially for heavy users,
the Preventative Maintenance Program can restore the
water resistant integrity of the outer shell to help prevent
water from intruding into the electronics. In short, the
Preventative Maintenance Program enables you to catch
small problems before they become big problems. As with
repairs, Bullard offers 48-hour turnaround on preventative
maintenance. For more information, call 877-BULLARD.
TI Training
Bullard is committed to ensuring that thermal imager
users have the proper training to use thermal imaging
technology effectively. In fact, Bullard employs firefighters
In This
Section
• Replacement Parts Reference Table
• Transmitter, Receiver & DVR Options
• Accessories
• Kits & Bundles
• Extended Warranties
• Upgrades
• Replacement Parts
• Retired Thermal Imager Accessories
& Parts
21 www.bullard.com
887-BULLARD
Thermal Imagers: Replacement Parts
Reference Table
Replacement Parts
TI: Accessories &
FIRE LAW
Eclipse® LD
Commander
TacSight®
TacSight®
T3 Series
T4 Series
Eclipse®
Edge™
TI/TIx
S1/S2
SE35
MX
Part
TI
ACADAPTOR • • • • • • • • • •
ACADAPTOR20V • • • • • • •
BATTERYKNOBS • • •
BATTERYNIMH • •
BATTERYNIMHULTRA • • •
BUMPERKIT • • •
CARADAPTOR • • • • • • • • • •
CASEFOAM • • • • • • •
CMDDATACABLE •
CMDDCCABLE •
CMDKIT •
CMDPM •
CMDRCACABLE •
CMDWINDOW •
DUALCHARGERBASE • • •
ECLBUMPER • • •
ECLCHARGER20V • • •
ECLDATACABLE •
ECLDATACABLERED • •
ECLDATAPOWER • • •
ECLGLARESHIELDLENS • •
ECLLCDGUARD • •
ECLLDLCDGUARD •
ECLLDPM •
ECLLDWINDOW •
ECLMETAL •
ECLMETAL160 • •
ECLMETAL320 •
ECLNIMHB • • •
ECLPM •
ECLWINDOW • •
EDGEFRONT •
EDGEHARDCASE •
EDGEPM •
LCDGUARD • • •
MCCANTENNA • • • • • • •
MLANTENNA • • • • • • •
MLKNOB • • • • • • •
Replacement Parts
TI: Accessories &
FIRE LAW
Eclipse® LD
Commander
TacSight®
TacSight®
T3 Series
T4 Series
Eclipse®
Edge™
TI/TIx
S1/S2
SE35
MX
Part
TI
MLSTRAP • • • • • • •
MXPM •
NFPANIMH •
NIMH • •
OMNI • • • • • • •
OMNIONLY • • • • • • •
SHSTRAP • • •
SINGLECHARGERBASE • • •
SSUSB • • • •
STRAPKIT • • •
STRAPSCREWS • • • •
T3CHARGER20V • • • •
T3COMBOSTRAP • • • •
T3GLARESHIELDCLIPS • • •
T3GLARESHIELDLENS • • •
T3NIMHB • •
T3PERSONALSTRAP • • • •
T3PM •
T3PMKIT •
T3SP • • • •
T3STRAPKIT • •
T3TRANSKNOB • • • •
T3WINDOW •
T4LCDGUARD •
T4PM •
T4PMKIT •
T4WINDOW •
TACPM • •
TACPMKIT • •
TACSTRAPKIT • •
TACWINDOW • •
TIDCPOWERCORD • •
TIMXPMKIT • •
TIPM •
TISP • • •
TIWINDOW • •
WINDOWSCREWS • • • •
www.bullard.com 23
Thermal Imager
Transmitter, Receiver
& DVR
Replacement Parts
TI: Accessories &
ECLLDSS
SceneCatcher 2.0 DVR for Eclipse® LD
• Eclipse® LD SceneCatcher DVR
• Not available for standard Eclipse®
HANDLETRANSONLY2
TacSight® 2-channel Wireless Remote Transmitter
• Transmitter for TacSight® Series
• Attachable/detachable 2-channel transmitter handle
• Receiver not included
• Transmit 2000 ft line of sight and 600 ft through typical construction
HANDLETRANSUPGRADE
TacSight® Transmitter Upgrade
• Upgrade an existing TacSight® Series transmitter handle to an improved
performance, 2-channel transmitter: transmits 2000 ft line of sight and 600 ft
through typical construction
ML1
2-channel MobileLink
• Battery operated receiver can monitor the scene from up to 600 ft (through
typical construction) on a 3.5” LCD display
• Includes BNC/RCA video-out jack, battery, 20 Volt battery charger, and 20 Volt AC adaptor
• Compatible with all Bullard TIs and many competitive models
ML2
2-channel MobileLink only
• Same features as ML1
• Does not include battery, 20 Volt charger, or 20 Volt AC adaptor
MLUPGRADE
2-channel MobileLink Upgrade
• Upgrade an existing MobileLink handheld receiver for reception from 600 ft
through typical construction
Replacement Parts
TI: Accessories &
REC2
2-channel Receiver
• Omni directional antenna with all necessary cables
• Compatible with all Bullard 2-channel transmitting thermal imagers
• Integrate wireless reception into your current video system
RECUPGRADE
2-channel Receiver Upgrade
• Upgrade an existing receiver box to an improved performance, 2-channel
receiver: 600 ft through ordinary construction
SS
SceneCatcher 2.0 DVR - Digital Video Recorder
• 640 x 480 resolution digital video recorder for T3 and T4 Series Thermal Imagers
• Records up to five hours of video and hundreds of still images
• USB 2.0 for lightning fast transfer speed
• Seamless PC software interface (USB included)
SSUPGRADE
SceneCatcher 2.0 Upgrade
• Upgrade an existing T3 or T4 Series SceneCatcher to the higher performance
SceneCatcher 2.0
SSTRANS2
SceneCatcher 2.0 DVR and 2-channel Wireless Remote Transmitter
• Same features as SS for T3 and T4 Series Thermal Imagers
• 2-channel wireless remote transmitter
• Transmits 2000 ft line of sight and 600 ft through typical construction
• Receiver purchased separately
SSTRANS2UPGRADE
SceneCatcher 2.0 DVR and 2-channel Wireless Remote Transmitter
• Upgrade an existing T3 or T4 Series SceneCatcher to the higher performance
SceneCatcher 2.0 with a 2-channel wireless remote transmitter
• Transmits 2000 ft line of sight and 600 ft through typical construction
• Receiver purchased separately
www.bullard.com 25
Thermal Imager
Transmitter, Receiver
& DVR
Replacement Parts
TI: Accessories &
TACSS
TacSight® SceneCatcher 2.0 DVR
• TacSight® Series digital video recorder
• Includes CD-ROM with instruction, download software, and data cable
• Non-reflective decals
• Records up to five hours of video and hundreds of still images
TACSSUPGRADE
TacSight® SceneCatcher Upgrade
• Upgrade an existing TacSight® Series SceneCatcher to the higher performance
SceneCatcher 2.0
TACSSTRANS2UPGRADE
SceneCatcher 2.0 DVR and 2-channel Wireless Remote Transmitter
• Upgrade an existing TacSight® SceneCatcher to the higher performance
SceneCatcher 2.0 with a 2-channel wireless remote transmitter
• Transmits 2000 ft line of sight and 600 ft through typical construction
• Receiver purchased separately
TACSSTRANS2
TacSight® SceneCatcher 2.0 DVR and 2-channel Wireless Remote Transmitter
• Same features as TACSS
• 2-channel Wireless Remote Transmitter
• Receiver purchased separately
T3TRANSONLY2
2-channel Wireless Remote Transmitter
• Transmitter for T3 and T4 Series Thermal Imagers
• Transmits 2000 ft line of sight and 600 ft through typical construction
• Receiver purchased separately
T3TRANSUPGRADE
Transmitter Upgrade
• Upgrade an existing T3 or T4 Series transmitter handle to an improved performance,
2-channel transmitter: transmits 600 ft through ordinary construction
Replacement Parts
TI: Accessories &
ACINVERTER
AC Power Inverter, 75 Watt, For Use with Bullard Thermal Imagers
• Use with 12 Volt cigarette lighter socket
• Converts 12 Volt DC battery power to 120 Volt AC power
ECLGLARESHIELD
Glare Shield for Eclipse® and Edge™ Thermal Imagers
• Provides maximum visibility during size-up and other bright conditions
ECLPOWERHOUSE
Vehicle Mounted Direct Charge System, NFPA 1901 Compliant
• Charges Eclipse® Series and Edge™ Thermal Imagers and includes a spare battery
• Hardwire installation ready and AC/DC connectivity
eclretract
Retractable Strap
• Works with Eclipse® Series and Edge™ Thermal Imagers
• Extendable lanyard designed to keep the thermal imager out of the way while
working or crawling, yet be easily accessible when needed
ECLPOWERUP
PowerUp Charger, Analyzer, and Conditioner for Eclipse® and Edge Series Thermal Imagers
• Charges, analyzes, and conditions batteries for optimal performance
• Works in conjunction with myBullard® personal control panel software
ECLPOWERUPUPGRADE
PowerUp Charger, Analyzer, and Conditioner - Upgrade
• Same as ECLPOWERUP but upgrades standard desktop charger to PowerUp
with new Thermal Imager purchases
HANDLE
Thermal Imager Handle for TacSight® Series Thermal Imagers
• Does not include transmitter
• Non-reflective labels
HARDCASE
Thermal Imager Carrying Case for T3, T4, and TacSight® Series Thermal Imagers
• Pelican™ case with unconditional lifetime guarantee
• Also holds Transmit Handle, MobileLink, Tacport, charger, and two batteries
www.bullard.com 27
Thermal Imager
Accessories
Replacement Parts
TI: Accessories &
POWERHOUSE
T3 or T4 Vehicle Mounted Direct Charge System
• Charges T3 and T4 Series Thermal Imagers as well as a spare battery
• Hardwire installation ready
• Attachment hardware
• NFPA 1901 compliant
POWERHOUSEKIT
Mounted Direct Charge System
• For T3, T4, and TacSight® Series Thermal Imagers
• Free-standing kit for Powerhouse
• Includes AC adaptor for use in station house
• All necessary hardware included
RCN17ALK
Alkaline Battery Case
• Fits TacSight® Series Thermal Imagers
• Eight AA alkaline batteries required (batteries not included)
• Not for rechargeable batteries
T320CASEUPGRADE
Thermal Imager Carrying Case
• Upgrade T320 Thermal Imager case at time of purchase
• Pelican™ case with unconditional lifetime guarantee
• Will also hold Transmit Handle, MobileLink, Tacport, charger, and two
spare batteries
T3ALK
Alkaline Battery Case
• Fits T3 and T4 Series Thermal Imagers
• Eight AA alkaline batteries required (batteries not included)
• Not for rechargeable batteries
T3GLARESHIELD
Glare Shield
• Fits T3 and TacSight® Series Thermal Imagers
• Eliminates glare for daytime use
• Provides maximum visibility during size-up and other bright conditions
Replacement Parts
TI: Accessories &
T3HANDLE
Thermal Imager Handle for T3 and T4 Series Thermal Imagers
• Does not include transmitter
T3MAXCASEUPGRADE
Thermal Imager Carrying Case (Upgrade at Time of Purchase)
• Pelican™ case with unconditional lifetime guarantee
• Also holds Transmit Handle, MobileLink, Tacport, charger, and two batteries
T3POWERUP
PowerUp Charger, Analyzer, and Conditioner for T3, T4, and TacSight® Series Thermal Imager
• Charges, analyzes, and conditions batteries for optimal performance
• Works in conjunction with myBullard® personal control panel software
T3POWERUPUPGRADE
PowerUp Charger, Analyzer, and Conditioner - Upgrade
• Same as T3POWERUP but upgrades standard desktop charger to PowerUp with new
Thermal Imager purchases
T3RETRACT
Retractable Strap
• Extendable strap designed to keep the T3, T4, or TacSight® Series Thermal
Imagers out of the way while working
T4GLARESHIELD
Glare Shield for T4 Series Thermal Imagers
• E liminates glare for daytime use
• Provides maximum visibility during size-up and other bright conditions
T4MAXCASEUPGRADE
Thermal Imager Carrying Case (Upgrade at Time of Purchase)
• Pelican™ case with unconditional lifetime guarantee
• Also holds Transmit Handle, MobileLink, Tacport, charger, and two batteries
T4NCASEUPGRADE
Thermal Imager Carrying Case (Upgrade at Time of Purchase)
• Pelican™ case with unconditional lifetime guarantee
• Also holds Transmit Handle, MobileLink, Tacport, charger, and two batteries
www.bullard.com 29
Thermal Imager
Accessories
Replacement Parts
TI: Accessories &
TACPORT
Attachable Utility Block
• For use with T3, T4, and TacSight® Series Thermal Imagers
• Provides video-out signal for extended training or surveillance operations
• AC/DC connections for power input (DC adaptor included)
• Maintains tripod mount
TACSCOPE
Attachable Monocular Eyepiece
• For use with T3, T4, and TacSight® Series Thermal Imagers
• Clear view of thermal image and easily removed for low threat operations
• Eliminates backlighting of face, by LCD screen, during high risk situations
• Display on/off switch for additional stealth
Thermal Imager
Kits & Bundles
ECLBUNDLE
Eclipse® Thermal Imaging Bundle
• Same features as Eclipse® plus: ECLPOWERHOUSE-vehicle charger (includes
two batteries)
ECLLDBUNDLE
Eclipse® LD Thermal Imaging Bundle
• Same features as Eclipse® LD plus: ECLPOWERHOUSE-vehicle charger (includes
two batteries)
T320BUNDLE
T320 Thermal Imaging Bundle
• Same features as T320 plus: POWERHOUSE-vehicle charger, T320EXT-1 year
extended warranty
Replacement Parts
TI: Accessories &
T320TTBUNDLE
T320TT Thermal Imaging Bundle
• Same features as T320TT plus: POWERHOUSE-vehicle charger, T320TTEXT-1 year
extended warranty
T3MAXBUNDLE
T3MAX Thermal Imaging Bundle
• Same features as T3MAX plus: Powerhouse-vehicle charger, T3MAXEXT-1 year
extended warranty
T3MAXTTBUNDLE
T3maxtt Thermal Imaging Bundle
• Same features as T3maxtt plus: Powerhouse-vehicle charger, T3MAXTTEXT-1 year
extended warranty
T4MAXBUNDLE
T4MAX Thermal Imaging Bundle
• Same features as T4MAX plus: Powerhouse-vehicle charger, T4MAXEXT-1 year
extended warranty
T4NBUNDLE
T4N Thermal Imaging Bundle
• Same features as T4N plus: Powerhouse-vehicle charger, T4NEXT-1 year
extended warranty
T4NBUNDLESS
T4N Thermal Imaging Bundle
• Same features as T4N plus: Powerhouse-Vehicle Mounted Direct Charge
System, SCENECATCHER-digital video recorder, T4NEXT-1 year extended warranty
NOTE: T4N attachable accessories are not NFPA 1801-2013 compliant
• Also available: T3MAXBUNDLESS, T3MAXTTBUNDLESS, T320BUNDLESS,
T320TTBUNDLESS, and T4MAXBUNDLESS
www.bullard.com 31
Thermal Imager
Kits & Bundles
Replacement Parts
TI: Accessories &
TacSightSE35KIT
TacSight® SE35 Thermal Imaging Kit
• Same features as TacSight® SE35 plus: HANDLETRANSONLY2-two channel wireless
remote transmitter handle, ML2-MobileLink two-channel wireless remote receiver,
TACSCOPE-attachable monocular eyepiece, TACPORT-attachable utility block with
power in/power out, video out, tripod mount, RCN17ALK-alkaline battery pack for
alternate AA battery power, NIMH-spare battery
TacSightSE35KIT2
TacSight® SE35 Thermal Imaging Kit
• Same features as TacSight® SE35 plus: TACSSTRANS2-SceneCatcher DVR and
2-channel Transmitter, ML2-MobileLink two-channel wireless remote receiver,
TACSCOPE-attachable monocular eyepiece, TACPORT-attachable utility block with
power in/power out, video out, tripod mount, RCN17ALK-alkaline battery pack for
alternate AA battery power, NIMH-spare battery, T3GLARESHIELD-glare shield
Thermal Imager
Extended Warranties
CareFree™ Thermal Imager Extended Warranty
• Extends standard warranty to 5 years and includes battery replacement coverage
• Order this part number with purchases of new thermal imagers
T4MAX
T4N
Part
ECLCF •
ECLCFAM* •
ECLCFBUNDLE •
ECLLDCF •
ECLLDCFAM* •
ECLLDCFBUNDLE •
T4MAXCF •
T4MAXCFAM* •
T4NCF •
T4NCFAM* •
* Can only be ordered for aftermarket purchases; within one year of thermal imager manufacturing date.
Replacement Parts
TI: Accessories &
ECLEXT
Thermal Imager Extended Warranty
• Available for Eclipse® Thermal Imagers
• 1 year extended warranty (total of 2 years)
• Must be purchased when thermal imager is ordered
ECLLDEXT
Thermal Imager Extended Warranty
• Available for Eclipse® LD Thermal Imagers
• 1 year extended warranty (total of 2 years)
• Must be purchased when thermal imager is ordered
ECLLDEXT2
Thermal Imager Extended Warranty
• Available for Eclipse® LD Thermal Imagers
• 2 year extended warranty (total of 3 years)
• Must be purchased when thermal imager is ordered
EdgeEXT
Thermal Imager Extended Warranty
• Available for Edge™ Thermal Imagers
• 1 year extended warranty (total of 2 years)
• Must be purchased when thermal imager is ordered
EdgeEXT2
Thermal Imager Extended Warranty
• Available for Edge™ Thermal Imagers
• 2 year extended warranty (total of 3 years)
• Must be purchased when thermal imager is ordered
SE35EXT
Thermal Imager Extended Warranty
• Available for TacSight® SE35 Thermal Imagers
• 1 year extended warranty (total of 2 years)
• Must be purchased when thermal imager is ordered
www.bullard.com 33
Thermal Imager
Extended Warranties
Replacement Parts
TI: Accessories &
T320EXT
Thermal Imager Extended Warranty
• Available for T320 Thermal Imagers
• 1 year extended warranty (total of 2 years)
• Must be purchased when thermal imager is ordered
T320EXT2
Thermal Imager Extended Warranty
• Available for T320 Thermal Imagers
• 2 year extended warranty (total of 3 years)
• Must be purchased when thermal imager is ordered
T320TTEXT
Thermal Imager Extended Warranty
• Available for T320TT Thermal Imagers
• 1 year extended warranty (total of 2 years)
• Must be purchased when thermal imager is ordered
T320TTEXT2
Thermal Imager Extended Warranty
• Available for T320TT Thermal Imagers
• 2 year extended warranty (total of 3 years)
• Must be purchased when thermal imager is ordered
T3MAXEXT
Thermal Imager Extended Warranty
• Available for T3MAX Thermal Imagers
• 1 year extended warranty (total of 2 years)
• Must be purchased when thermal imager is ordered
T3MAXEXT2
Thermal Imager Extended Warranty
• Available for T3MAX Thermal Imagers
• 2 year extended warranty (total of 3 years)
• Must be purchased when thermal imager is ordered
Replacement Parts
TI: Accessories &
T3MAXTTEXT
Thermal Imager Extended Warranty
• Available for T3MAXTT Thermal Imagers
• 1 year extended warranty (total of 2 years)
• Must be purchased when thermal imager is ordered
T3MAXTTEXT2
Thermal Imager Extended Warranty
• Available for T3MAXTT Thermal Imagers
• 2 year extended warranty (total of 3 years)
• Must be purchased when thermal imager is ordered
T4MAXEXT
Thermal Imager Extended Warranty
• Available for T4MAX Thermal Imagers
• 1 year extended warranty (total of 2 years)
• Must be purchased when thermal imager is ordered
T4MAXEXT2
Thermal Imager Extended Warranty
• Available for T4MAX Thermal Imagers
• 2 year extended warranty (total of 3 years)
• Must be purchased when thermal imager is ordered
T4NEXT
Thermal Imager Extended Warranty
• Available for T4N Thermal Imagers
• 1 year extended warranty (total of 2 years)
• Must be purchased when thermal imager is ordered
T4NEXT2
Thermal Imager Extended Warranty
• Available for T4N Thermal Imagers
• 2 year extended warranty (total of 3 years)
• Must be purchased when thermal imager is ordered
www.bullard.com 35
Thermal Imager
Upgrades
Replacement Parts
TI: Accessories &
ECL160
Eclipse® Upgrade to 160 x 120 Resolution
• Available for standard Eclipse® Thermal Imagers
ECL160UPGRADE
Eclipse® Upgrade to 160 x 120 Resolution (Installed Base)
• Available for standard Eclipse® Thermal Imagers
• For upgrades of field installed units
ECL160UPGRADEPM
Eclipse® Upgrade to 160 x 120 Resolution (Installed Base with PM)
• Available for standard Eclipse® Thermal Imagers
• For upgrades of field installed units
• Includes Preventative Maintenance Package with complete exterior refurbishment
ECL320
Eclipse® LD Upgrade to 320 x 240 Resolution
• Available for Eclipse® LD Thermal Imagers
ECL320UPGRADE
Eclipse® LD Upgrade to 320 x 240 Resolution (Installed Base)
• Available for Eclipse® LD Thermal Imagers
• For upgrades of field installed units
ECLBTD
Bar Temperature Display
• Available for standard Eclipse® Thermal Imagers
• Provides surface temperature measurement in bar style (RHI) format
Replacement Parts
TI: Accessories &
eclCUSTGRAPH
Customized Startup Graphics
• Available for standard Eclipse® Thermal Imagers
• Load your own personalized startup graphic
ECLETT
Electronic Thermal Throttle®
• Available for Eclipse® Series Thermal Imagers
• Isolates heat sources in shades of blue
• Exclusive Bullard Thermal Imager feature
ECLHHC
High Heat Colorization
• Available for standard Eclipse® Thermal Imagers
• Highlights high heat conditions in yellow, orange, and red
ECLNTD
Numeric Temperature Display
• Available for standard Eclipse® Thermal Imagers
• Provides surface temperature measurement in numeric format
eclSRH
Super Red Hot Colorization
• Available for Eclipse® LD Thermal Imagers
• Highlights high heat conditions in yellow, orange, and red
eclTEMP
Numeric Temperature Display
• Available for Eclipse® LD Thermal Imagers
• Provides surface temperature measurement in numeric and/or bar style
(RHI) format
www.bullard.com 37
Thermal Imager
Upgrades
Replacement Parts
TI: Accessories &
eclTEMPCOMBO
Numeric and Bar Temperature Display
• Available for standard Eclipse® Thermal Imagers
• Provides both numeric and bar style surface temperature measurement
Edge160
Edge™ Upgrade to 160 x 120 Resolution
• Available for Edge™ Thermal Imagers
Edge160UPGRADE
Edge™ Upgrade to 160 x 120 Resolution (Installed Base)
• Available for Edge™ Thermal Imagers
• For upgrades of field installed units
T320TTUPGRADE
T320 Upgrade to T320TT with Electronic Thermal Throttle®
• Available for T320 Thermal Imagers
• Exclusive Bullard Thermal Imager feature
T3MAXTTUPGRADE
T3MAX Upgrade to T3MAXTT with Electronic Thermal Throttle®
• Available for T3MAX Thermal Imagers
• Exclusive Bullard Thermal Imager feature
Replacement Parts
TI: Accessories &
ACADAPTOR (12-15V)
12-15 Volt AC Adaptor
• For use with 12-15 Volt T4MAX, T3MAX, T320, Eclipse® Series, Edge™,
and TacSight® Series Thermal Imager chargers, Eclipse® Powerhouse, and
Powerhouse Kit
ACADAPTOR20V
20 Volt AC Adaptor
• For use with 20 Volt T3 and T4 Series, Eclipse® Series, Edge™, and TacSight®
Series Thermal Imager chargers and charger/analyzers
CARADAPTOR (12-15V)
12-15 Volt DC Car Adaptor
• For use with 12-15 Volt T3 and T4 Series, Eclipse® Series, Edge™, and
TacSight® Series Thermal Imager chargers, Eclipse Powerhouse, and
Powerhouse Kit
• Not for use with 20 Volt desktop chargers (use AC Inverter)
CASEFOAM
Foam Insert
• For use with T3, T4, and TacSight® Series Thermal Imagers
• Hardcase replacement foam insert with accessory accommodation
ECLBUMPER
Front Rubber Bumper
• For Eclipse® Series and Edge™ Thermal Imagers
www.bullard.com 39
Thermal Imager
Replacement Parts
Replacement Parts
TI: Accessories &
ECLCHARGER20V
20 Volt Desktop Charger
• For use with Eclipse® Series and Edge™ Thermal Imagers
• Charger base for NiMH batteries
• Includes 20 Volt AC Adaptor (ACADAPTOR20V)
ECLDATACABLE
Data Cable
• Cable for standard Eclipse® Thermal Imagers
• Data cable required to connect above thermal imager
• Required for accessing the Eclipse® Control Panel Software
• OnLY for use with standard Eclipse® Thermal Imagers
ECLDATACABLERED
Data Cable - Red
• Cable for Eclipse® LD and Edge™ Thermal Imagers
• Data cable required to connect the above thermal imager
• Required for accessing the myBullard™ personal control panel software
ECLDATAPOWER
AC Power Adaptor for Data Cable
• Adaptor for Eclipse® Series and Edge™ Thermal Imagers
• Required for accessing the Eclipse® Control Panel and myBullard™ personal
control panel software
ECLGLARESHIELDLENS
Glare Shield Replacement Lens
• For ECLGLARESHIELD
ECLLCDGUARD
LCD Guard (Rear Boot)
• Fits standard Eclipse® and Edge™ Thermal Imagers
Replacement Parts
TI: Accessories &
ECLLDLCDGUARD
LCD Guard (Rear Boot)
• For Eclipse® LD Thermal Imagers
ECLLDPM
Preventive Maintenance Service
• Applied to the Eclipse® LD Thermal Imagers
• Gives thermal imager a “factory new” refurbishment: complete diagnostic,
replacement of maintenance parts, a new outer housing, includes inbound/
outbound ground shipping with a 48 business hour turnaround
ECLLDWINDOW
Display Cover
• For Eclipse® LD Thermal Imagers
• Hard-coated polycarbonate display shield
ECLMETAL
Front Metal Plate
• For Eclipse® Series Thermal Imagers
• Includes metal plate and four screws
ECLMETAL160
Front Metal Plate
• For Eclipse® Series Thermal Imagers
• Includes metal plate and four screws
ECLMETAL320
Front Metal Plate
• For Eclipse® LD Thermal Imagers
• Includes metal plate and four screws
www.bullard.com 41
Thermal Imager
Replacement Parts
Replacement Parts
TI: Accessories &
ECLNIMH
10 Volt NiMH Rechargeable Battery
• Compatible with Eclipse® Series and Edge™ Thermal Imagers
ECLPM
Preventive Maintenance Service
• Applied to the standard Eclipse® Thermal Imagers
• Gives thermal imager a “factory new” refurbishment: complete diagnostic,
replacement of maintenance parts, a new outer housing, includes inbound/
outbound ground shipping with a 48 business hour turnaround
ECLWINDOW
Display Cover
• For standard Eclipse® and Edge™ Thermal Imagers
• Hard-coated polycarbonate display shield
EdgeFRONT
Front Replacement Cover
• Replacement cover for Edge™ Thermal Imager
• NOT for use with Eclipse® Series Thermal Imagers
EdgeHARDCASE
Thermal Imager Carrying Case
• Compatible with Edge™ Thermal Imagers
• Pelican™ Case with unconditional lifetime guarantee
EdgePM
Preventive Maintenance Service
• Applied to the Edge™ Thermal Imagers
• Gives thermal imager a “factory new” refurbishment: complete diagnostic,
replacement of maintenance parts, a new outer housing, includes inbound/
outbound ground shipping with a 48 business hour turnaround
Replacement Parts
TI: Accessories &
LCDGUARD
Replacement LCD Guard (Rear Boot)
• For T3 and TacSight® Series Thermal Imagers, as well as MobileLink
handheld receivers
MCCANTENNA
Antenna for Mobile Command Center
• Replacement antenna for Mobile Command Center
MLANTENNA
MobileLink Antenna
• Replacement antenna for MobileLink handheld receiver
MLKNOB
Channel Selector Knob
• Replacement knob for MobleLink handheld receiver
MLSTRAP
Hand Strap
• Replacement hand strap for MobileLink handheld receiver
NFPANIMH
NFPA NiMH Rechargeable Battery
• For T4N Thermal Imagers
www.bullard.com 43
Thermal Imager
Replacement Parts
Replacement Parts
TI: Accessories &
NIMH
10 Volt NiMH Rechargeable Battery
• For TacSight® Series Thermal Imagers and MobileLink handheld receivers
SSUSB
SceneCatcher Upgrade with Mini-USB
• Upgrade old style SceneCatcher data port to mini-USB
T3CHARGER20V
Charger Base
• For use with T3 and T4 Series Thermal Imagers
• Charger Base for NiMH batteries
• Includes 20 Volt AC Adaptor (ACADAPTOR20V)
T3COMBOSTRAP
Combo Wrist and Gear Strap
• Use with T3 or T4 Series Thermal Imagers
T3GLARESHIELDCLIPS
Glare Shield Replacement Clips
• Replacement clips for T3Glareshield and T4Glareshield
T3GLARESHIELDLENS
Glare Shield Replacement Lens
• Replacement lens for T3Glareshield and T4Glareshield
Replacement Parts
TI: Accessories &
T3NIMH
10 Volt NiMH Rechargeable Battery
• For T3 and T4 Series Thermal Imagers and MobileLink handheld receiver
T3PERSONALSTRAP
Personalized Strap - Included with Camera
• When ordering T3 and T4 Series Thermal Imagers
• Personalize up to 8 spaces and characters
t3PM
Preventative Maintenance Service
• Applied to the T3 Series Thermal Imagers
• Gives thermal imager a “factory new” refurbishment: complete diagnostic,
replacement of maintenance parts, a new outer housing, includes inbound/
outbound ground shipping with a 48 business hour turnaround
T3PMKIT
Service Kit
• For T3 Series Thermal Imagers
• Includes: Left and right side straps, display cover window, and battery
T3SP
Replacement Personalized Strap
• For T3 and T4 Series Thermal Imagers as an after purchase replacement
• Personalize up to 8 spaces and characters
t3strapkit
Replacement Strap Kit
• For T3 or T4 Series Thermal Imagers
• Includes right and left side straps
www.bullard.com 45
Thermal Imager
Replacement Parts
Replacement Parts
TI: Accessories &
T3TRANSKNOB
Channel Selector Knob
• Replacement for transmitter handle
T3WINDOW
Replacement Window
• For T3 Series Thermal Imagers and MobileLink handheld receiver
• Hard coated polycarbonate display shield
T4LCDGUARD
Replacement LCD Guard (Rear Boot)
• For T4 Series Thermal Imagers
T4PM
Preventative Maintenance Service
• Applied to the T4 Series Thermal Imagers
• Gives thermal imager a “factory new” refurbishment: complete diagnostic,
replacement of maintenance parts, a new outer housing, includes inbound/
outbound ground shipping with a 48 business hour turnaround
T4PMKIT
Service Kit
• For T4 Series Thermal Imagers
• Includes: Left and right side straps, display cover window, and battery
T4WINDOW
Replacement Window
• For T4 Series Thermal Imagers and MobileLink handheld receiver
• Hard coated polycarbonate display shield
Replacement Parts
TI: Accessories &
TACPM
Preventative Maintenance Service
• Applied to the TacSight® Series Thermal Imagers
• Gives thermal imager a “factory new” refurbishment: complete diagnostic,
replacement of maintenance parts, a new outer housing, includes inbound/
outbound ground shipping with a 48 business hour turnaround
tacpmkit
Service Kit
• For TacSight® Series Thermal Imagers
• Includes: Left and right side straps, display cover window, and battery
TACSTRAPKIT
Replacement Strap Kit
• For TacSight® Series Thermal Imagers
• Includes right and left side straps
tacwindow
Replacement Window
• For TacSight® Series Thermal Imagers and MobileLink handheld receiver
• Hard coated polycarbonate display shield
WINDOWSCREWS
Replacement Screws for Display Window
• For T3, T4, and TacSight® Series Thermal Imager display windows
www.bullard.com 47
Retired Thermal Imager
Replacement Parts
Replacement Parts
TI: Accessories &
BATTERYKNOBS
Knobs for Battery
• Replacement Knobs and hardware for TIx, MX, and TI Commander Thermal Imagers
BATTERYNIMH
Rechargeable Battery
• For use with MX and TIx Thermal Imagers
• 10 Volt NiMH rechargeable battery
BATTERYNIMHULTRA
Ultra-performance NiMH battery
• For use with MX, TI, TI Commander, and TIx Thermal Imagers to increase
operating time
• 10 Volt high capacity NiMH rechargeable battery
BUMPERKIT
Replacement Bumpers
• Replacement bumpers for MX, TI Commander, and TIx Thermal Imagers
• Includes three field replaceable bumpers and hardware
CLAMP
Clamp System
• Compatible with MX, TI Commander, and TIx Thermal Imagers
• Mount imager to almost any surface
• Use with tripod or as stand alone system
CMDDATACABLE
Data Transfer Cable
• Cable for downloading saved digital thermal images
• Connects from TI Commander Thermal Imagers to PC serial port
Replacement Parts
TI: Accessories &
CMDDCCABLE
Direct Charge Cable
• Power cord for direct charging of TI Commander Thermal Imagers
CMDKIT
Service Kit
• For TI Commander Thermal Imagers
• Includes: Replacement bumpers, side and top straps, replacement display cover
window, battery, and direct charge power cord
CMDPM
Preventative Maintenance Service
• Applied to the TI Commander Thermal Imagers
• Gives thermal imager a “factory new” refurbishment: complete diagnostic,
replacement of maintenance parts, a new outer housing, includes inbound/
outbound ground shipping with a 48 business hour turnaround
CMDRCACABLE
Video Out Cable
• For use with TI Commander Thermal Imagers
• RCA Cable for thermal imager video capture
• Connect from TI Commander to external monitor or recorder
• Not suitable for high heat environments
CMDTRUCKMNT
TI Commander Truck Mount
• Built-in charger
• Mounting gasket
• Attachment hardware
CMDWINDOW
Replacement Window
• For TI Commander Thermal Imagers
• Hard coated polycarbonate display shield
www.bullard.com 49
Retired Thermal Imager
Replacement Parts
Replacement Parts
TI: Accessories &
DUALCHARGERBASE
Dual Charger Base
• For use with MX, TI Commander, and TIx Thermal Imagers
• Direct charge battery charger base for NiMH rechargeable batteries
• Does not include power adaptors and cords
MTSSTRANS2UP
Transmitter Handle Upgrade
• Upgrade an existing transmitter handle to an SSTRANS2
MXPM
Preventative Maintenance Service
• Applied to MX Thermal Imagers
• Gives thermal imager a “factory new” refurbishment: complete diagnostic,
replacement of maintenance parts, a new outer housing, includes inbound/
outbound ground shipping with a 48 business hour turnaround
OMNI
Remote Receiver Antenna
• Compatible with receiver box system
• Omni directional antenna
• Permanent and magnetic mounts included
OMNIONLY
Remote Receiver Antenna
• Compatible with receiver box system
• Omni directional antenna
• Antenna mounts not included
SHSTRAP
Shoulder Strap
• Replacement shoulder strap for TI Commander Thermal Imagers
Replacement Parts
TI: Accessories &
SINGLECHARGERBASE
TI Charger Base
• For use with charger base for MX, TI, TIx, and TI Commander Thermal Imagers
• No direct charge capability
• For use with NiMH or NiCad batteries
• Does not include power adaptors and cords
STRAPKIT
Replacement Strap Kit
• For MX, TI Commander, and TIx Thermal Imagers
• Includes: wrist, side, and top straps
• Made of Kevlar® and leather material
STRAPSCREWS
Side Strap Replacement Screws
• For MX, TI Commander, and TIx Thermal Imagers
• Four replacement screws for side straps
TIDCPOWERCORD
Direct Charge Power Cord
• For MX and TIx Thermal Imagers
• Power cord for direct charger
• For upgraded direct charge port Thermal Imagers, order Part Number CMDDCCABLE
TIGLARESHIELD
Glare-reducing Leather Shroud
• Attaches to MX, TI Commander, and TIx Thermal Imager
• Reduces glare in bright sun conditions
TIMXPMKIT
Service Kit
• For MX and TIx Thermal Imagers
• Includes: Replacement bumpers, side and top straps, replacement display cover
window, battery and direct charge power cord
www.bullard.com 51
Retired Thermal Imager
Replacement Parts
Replacement Parts
TI: Accessories &
TIPM
Preventive Maintenance Service
• Applied to the TI and TIx Thermal Imagers
• Gives thermal imager a “factory new” refurbishment: complete diagnostic,
replacement of maintenance parts, a new outer housing, includes inbound/
outbound ground shipping with a 48 business hour turnaround
TISP
Replacement Strap Kit
• Use with MX, TI Commander, and TIx Thermal Imagers
• Includes right and left side straps
tiwindow
Replacement Window
• For MX and TIx Thermal Imagers
• Hard coated polycarbonate display shield
TRIPOD
Thermal Imager Tripod
• For MX, TI Commander, and TIx Thermal Imagers
• Heavy-duty 4 ft tripod for thermal imager
• Mounting bracket included
TRUCKMNT
Truck Mount Direct Charge System
• For TIx Thermal Imagers
• Includes: truck mount, built-in charger, mounting gasket, and attachment hardware
In This
Section
• UST Series
• FX Series
• PX Series
• LT Series
• USRX Series (refer to pp 102-107)
• Accessories & Replacement Parts
www.bullard.com
Fire Helmet
UST Series
UST Colors:
UST6
Gloss finish
USTM6
MATTE finish
highlights:
• Thermoglas® outer shell face protection (R334)
• M-PACT Plus molded inner liner system (R921) • Leather ratchet cover (R160)
• Sure-Lock® ratchet headband (R637) • Removable fire resistant cotton brow pad (R635)
• 6-point nylon crown straps with crown pad (R112) • Stars and Stripes brass eagle for 6” leather front
• Nomex® chinstrap with Quick-Release buckle and (leather front sold separately)
Postman’s Slide Fastener (R148) • Available with TrakLite®
• Black rip-stop Nomex® ear and neck protector (R721)
• 4” hard-coated optically correct faceshield: standard
Gloss TRAKLITE®
UST6TL - TrakLite® on standard gloss shell
UST6BRKTL* - w/Bourke, no faceshield
UST6R325TL* - w/R325 6" faceshield
USTG26TL - w/IZ2, no faceshield
USTG26BRKTL - w/IZ2, Bourke
USTG36TL - w/IZ3, no faceshield
UST Series
USTG36BRKTL - w/IZ3, Bourke
USTGFP26TL - w/FP2, no faceshield
USTGFP26BRKTL - w/FP2, Bourke
USTGFP36TL - w/FP3, no faceshield
USTGFP36BRKTL - w/FP3, Bourke
Matte TRAKLITE®
USTM6TL - TrakLite® on standard matte shell
USTM6BRKTL* - w/Bourke, no faceshield
USTM6R325TL* - w/R325 6" faceshield
USTMG26TL - w/IZ2, no faceshield
USTMG26BRKTL - w/IZ2, Bourke, no faceshield
USTMG36TL - w/IZ3, no faceshield
USTMG36BRKTL - w/IZ3, Bourke, no faceshield
USTMGFP26TL - w/FP2, no faceshield
USTMGFP26BRKTL - w/FP2, Bourke, no faceshield
USTMGFP36TL - w/FP3, no faceshield
USTGFP36BRKTL - w/FP3, Bourke, no faceshield
Gloss GoggleS
USTG26 - IZ2 on standard gloss shell
USTG26BRK - w/Bourke, no faceshield
USTG36 - IZ3 on standard gloss shell
USTG36BRK - w/Bourke, no faceshield
USTGFP26 - FP2 on standard gloss shell
USTGFP26BRK - w/Bourke, no faceshield
USTGFP36 - FP3 on standard gloss shell
USTGFP36BRK - w/Bourke, no faceshield
MATTE GoggleS
USTMG26 - IZ2 on standard matte shell
USTMG26BRK - w/Bourke, no faceshield
USTMG36 - IZ3 on standard matte shell
USTMG36BRK - w/Bourke, no faceshield
USTMGFP26 - FP2 on standard matte shell
USTMGFP26BRK - w/Bourke, no faceshield
USTMGFP36 - FP3 on standard matte shell
USTMGFP36BRK - w/Bourke, no faceshield
* Not NFPA-compliant
www.bullard.com 55
Fire Helmet
Configurations
We still offer 5” leather
front options. Please
contact Customer Service
for more information.
Gloss Bourke
UST6BRK* - Bourke on standard gloss shell
USTG26BRK - w/IZ2, no faceshield
USTG36BRK - w/IZ3, no faceshield
USTGFP26BRK - w/FP2, no faceshield
USTGFP36BRK - w/FP3, no faceshield
UST Series
matte Bourke
USTM6BRK* - Bourke on standard matte shell
USTMG26BRK - w/Bourke, IZ2, no faceshield
USTMG36BRK - w/Bourke IZ3, no faceshield
USTMGFP26BRK - w/Bourke, FP2, no faceshield
USTMGFP36BRK - w/Bourke, FP3, no faceshield
* Not NFPA-compliant
UST Series
1. Leather Front Holder: Choose between stars and 7. TrakLite®: Featuring multiple forward-facing, long
stripes eagle or brass maple leaf. lasting, and bright LED lights. TrakLite® is integrated
2. Gloss Shell: 9 colors into the helmet design for excellent weight balance
Matte Shell: 6 colors and illumination. Added safety features include the
3. Scotchlite® Reflective Striping: The highest quality rear buddy indicator light, long battery life (AAA
reflective material available. Retains reflectivity to batteries), and easy on/off operation.
500°F (260°C). Available standard in lime-yellow 8. Leather Front: Customize your leather front using
and orange or triple trim for accountability. our state-of-the-art online configurator at
4. Chinstrap with Postman's Slide: Easy to adjust www.BuildYourBullard.com/.
and secure.
5. Ear & Neck Protector: Choose between Nomex® or
PBI®/Kevlar® material, with or without throat strap. Available accessories &
6. Face Protection: 4” or 6" optically correct replacement parts:
faceshield eliminates distortion and reduces eye
(p 58-64)
stress and fatigue. Four types of industry-leading
ESS goggles also available.
www.bullard.com 57
UST Series
Accessories &
Replacement Parts
EL3
Replacement Clear Goggle Lens
Replacement Parts
UST: Accessories &
ES4
Innerzone 2-piece Strap
• Compatible with IZ2 goggles
• Available as 10-pack
ES5
Innerzone 1-piece Strap
• Compatible with IZ3 goggles
• Available as 10-pack
Essarslv-n
Goggle Sleeve
• For use with ESS goggles
• Made of flame-retardant Nomex®
EZEX
Snap Helmet Mount Brackets
• Compatible with IZ2 and FP2 goggles
• Available as 10-pack (20 pieces total)
FP2
ESS FirePro™ 1971 Goggles
• NFPA 1971-2013 Certified and ANSI/ISEA Z87.1-2010
• 2-piece snap-on/snap-off strap
• Anti-scratch/anti-fog lens
• Speed clip Quick-Adjust System
Replacement Parts
UST: Accessories &
• NFPA 1971-2013 Certified and ANSI/ISEA Z87.1-2010
• 1-piece wraparound strap
• Anti-scratch/anti-fog lens
• Speed clip Quick-Adjust System
IZ2
Innerzone 2B
• NFPA 1971-2013 Certified and ANSI/ISEA Z87.1-2010
• 2-piece snap-on/snap-off strap
• Anti-scratch/anti-fog lens
• Speed clip Quick-Adjust System
IZ3
Innerzone 3B
• NFPA 1971-2013 Certified and ANSI/ISEA Z87.1-2010
• 1-piece wraparound strap
• Anti-scratch/anti-fog lens
• Speed clip Quick-Adjust System
OR503
5” Brass Eagle
• Leather front holder for 5" leather fronts
• Includes mounting hardware
OR600
6” Brass Stars & Stripes Eagle
• Leather front holder for 6" leather fronts
• Includes mounting hardware
OR600ML
6” Brass Maple Leaf
• Leather front holder for 6" leather fronts
• Bullard exclusive
• Includes mounting hardware
www.bullard.com 59
UST Series
Accessories &
Replacement Parts
R112
Crown Strap Assembly
Replacement Parts
UST: Accessories &
• Made of Nomex®
• Includes crown pad (R636)
R148
Chinstrap
• Made of Nomex®
• Quick-Release buckle and Postman’s Slide Fastener
• Includes spacers and screws for mounting
R152
Faceshield Mounting Hardware Kit
• Compatible with R330 and R325 faceshield
• Aluminum mounting brackets
• Glass reinforced nylon knobs
• Stainless steel studs and brass T-nuts
R156
Faceshield Mounting Hardware Kit
• Compatible with R334 faceshield
• Aluminum mounting brackets
• Glass reinforced nylon knobs
• Stainless steel studs and brass T-nuts
R157
Replacement Screws for Leather Front Holder
• Set of 10 screws and 10 acorn nuts
R158
Replacement Screws for Leather Fronts
• Set of 20 screws; each leather front uses two
Replacement Parts
UST: Accessories &
• Compatible with all Bullard ratchet suspensions
R309
Bourke Eyeshield
R325
6" Faceshield
• Optically correct polycarbonate faceshield
• Mounting hardware (R152) not included
R330
4" Faceshield
• Optically correct polyarylate faceshield
• Mounting hardware (R152) not included
R334
4" Faceshield
• Optically correct polyarylate high-heat faceshield
• Mounting hardware (R156) not included
R535
Retro-reflective Stripes
• Fluorescent lime-yellow Scotchlite®
• Adhesive-backed
• Size: 2.1875”x 2.625”
• Set of 8
www.bullard.com 61
UST Series
Accessories &
Replacement Parts
R539
Retro-reflective Stripes
Replacement Parts
UST: Accessories &
R545
Retro-reflective Stripes
• Fluorescent lime-yellow triple trim Scotchlite®
• Adhesive-backed
• Size: 3”x 2.625”
• Set of 8
R549
Retro-reflective Stripes
• Fluorescent red-orange triple trim Scotchlite®
• Adhesive-backed
• Size: 3”x 2.625”
• Set of 8
R628
U-fit Ratchet Height Adjuster
R635
Cotton Brow Pad
• Made of Jersey knit cotton
• Fire-retardant
R635L
Leather Brow Pad
• Made of leather
• Fire-retardant
Replacement Parts
UST: Accessories &
• Includes: R635-jersey knit brow pad, R628-height adjuster, R160-leather
ratchet cover
R637L
Sure-Lock® Ratchet Headband with Leather Brow Pad
• Includes: R635L-leather brow pad, R628-height adjuster, R160-leather
ratchet cover
R721
Ear/Neck Protector
• Made of Nomex®
• Rip-stop
• Flame-retardant cotton lining
• Black color
R721YLW
Ear/Neck Protector
• Made of Nomex®
• Rip-stop
• Flame-retardant cotton lining
• Yellow color
R726
Ear/Neck Protector with Throat Strap
• Made of Nomex®
• Rip-stop
• Flame-retardant cotton lining
• Black color
R726YLW
Ear/Neck Protector with Throat Strap
• Made of Nomex®
• Rip-stop
• Flame-retardant cotton lining
• Yellow color
www.bullard.com 63
UST Series
Accessories &
Replacement Parts
R741
Ear/Neck Protector
Replacement Parts
UST: Accessories &
• Made of PBI®/Kevlar®
• Rip-stop
• Flame-retardant cotton lining
• Tan color
R746
Ear/Neck Protector with Throat Strap
• Made of PBI®/Kevlar®
• Rip-stop
• Flame-retardant cotton lining
• Tan color
R921
M-PACT Plus Molded Inner Liner System with Cotton Brow Pad
• Inner shell with Urethane impact liner
• Includes: R637-Sure-Lock® ratchet headband, R635-jersey knit brow pad,
R636-cotton crown pad, R112-6-point nylon crown strap assembly,
Velcro® strips
R921L
M-PACT Plus Molded Inner Liner System with Leather Brow Pad
• Inner shell with Urethane impact liner
• Includes: R637-Sure-Lock® ratchet headband, R635L-leather brow pad,
R636-cotton crown pad, R112-6-point nylon crown strap assembly,
Velcro® strips
USTBLOCKKIT
Chinstrap Mounting Block Kit
• 12 mounting blocks and 24 screws service up to 6 complete helmets
FH Spotlight
Established in 1896, the National Fire Protection Safety Equipment Institute (SEI) have met all the rigors of
Association (NFPA) is a leading advocate of fire prevention a third-party certification process required by each NFPA
and is an authoritative source on public safety. product standard.
A major focus of NFPA is the development, publication, Are Bullard fire helmets certified to NFPA standards?
and dissemination of codes and standards for the fire Yes. Bullard fire helmets are certified to various NFPA
service. NFPA codes and standards are developed by about standards. Our Company’s strict compliance with these
250 committees, each of which represents a balance of standards can ensure you that Bullard helmets provide
affected interests. a certain standard level of protection. Our helmets have
In fact, the 300 NFPA codes and standards influence been certified to NFPA standards by the Safety Equipment
every building, process, service, design, and installation Institute (SEI). That information, as well as the NFPA
in the United States, as well as many of those used in compliance statement, is located on the label of each
other countries. helmet. The listing below shows the NFPA standard for
which each Bullard helmet model is certified.
How do I know if a helmet meets NFPA standards?
Check the label. Look for the compliance statement and NFPA 1971-2013 UST Series
the certification organization’s mark. The compliance PX Series
statement indicates that the specific product meets the FX Series
requirements of the relevant NFPA standards. Language LT Series
such as “Designed to meet …” or “Meets the relevant AX Series
portions of …” are not true compliance statements. Only USRX Series
products that meet all requirements of an NFPA standard, NFPA 1977-2011 Wildfire® Series
including independent third-party certification, can carry
NFPA 1951-2013 USRX Series
www.bullard.com 65
Fire Helmet
FX Series
FX Colors:
FX
highlights:
• Thermoglas® outer shell
• M-PACT Plus molded inner liner system with
Urethane impact liner (R921)
• Sure-Lock® ratchet headband (R637)
• 6-point Nylon crown straps with crown pad (R112)
• Nomex® chinstrap with Quick-Release buckle and
Postman’s Slide Fastener (R144)
• Black rip-stop Nomex® ear/neck protector (R721)
• 4” hard-coated optically-correct faceshield (R330)
• Leather ratchet cover (R160)
• Removable fire resistant cotton brow pad (R635)
• Scotchlite® reflective striping (R533)
(shown non-standard)
FX Series
• Leather ratchet cover (R160)
• Removable fire resistant cotton brow pad (R635)
• TrakLite® (TL)
• Scotchlite® reflective striping (R533)
www.bullard.com 67
Fire Helmet
PX Series
PX Colors:
PX
• Ultem® thermoplastic outer shell
• M-PACT Plus molded inner liner system with
Urethane impact liner (R921)
• Sure-Lock® ratchet headband (R637)
• 6-point Nylon crown straps with crown pad (R112)
• Nomex® chinstrap with Quick-Release buckle and
Postman’s Slide Fastener (R144)
• Black rip-stop Nomex® ear/neck protector (R721)
• 4” hard-coated optically correct faceshield (R330)
• Leather ratchet cover (R160)
• Removable fire resistant cotton brow pad (R635)
• Scotchlite® reflective striping (R533)
(shown non-standard)
PX Series
• Leather ratchet cover (R160)
• Removable fire resistant cotton brow pad (R635)
• TrakLite® (TL)
• Scotchlite® reflective striping (R533)
www.bullard.com 69
Fire Helmet
Customizable Parts
FX/PX Series
1. Crown Straps with Crown Pad: 6-point suspension fatigue. Four types of industry-leading ESS goggles
system with crown pad provides extra level of comfort. also available.
2. M-PACT Plus Molded Inner Liner System: Protects 8. TrakLite®: Featuring multiple forward-facing, long
against heat rise and provides an extra layer of lasting, and bright LED lights. TrakLite® is integrated
protection. into the helmet design for excellent weight balance
3. Sure-Lock® Ratchet Headband with Brow Pad: and illumination. Added safety features include the
Sure-Lock® is made exclusively by Bullard. Optional rear buddy indicator light, long battery life (AAA
leather brow pad available. batteries), and easy on/off operation.
4. Scotchlite® Reflective Striping: The highest quality 9. FX Outer Shell: Color pigment molded throughout
reflective material available. Retains reflectivity to shell, and offers the ultimate in chemical and
500°F (260°C). No burning, cracking or peeling. extreme heat resistance.
Available standard in lime-yellow and orange or 10. PX shell available in 7 colors.
triple trim for accountability. FX Shell available in 9 colors.
5. Chinstrap with Postman’s Slide: Easy to adjust
and secure.
6. Ear & Neck Protector: Choose between Nomex® or Available accessories &
PBI®/Kevlar® material, with or without throat strap. Replacement parts:
7. Face Protection: 4” optically correct faceshield
(p 71-76)
eliminates distortion and reduces eye stress and
ES5
Innerzone 1-piece Strap
• Compatible with IZ3 goggles
• Available as 10-pack
Essarslv-n
Goggle Sleeve
• For use with ESS goggles
• Made of flame retardant Nomex®
EZEX
Snap Helmet Mount Brackets
• Compatible with IZ2 and FP2 goggles
• Available as 10-pack (20 pieces total)
FP2
ESS FirePro™ 1971 Goggles
• NFPA 1971-2013 Certified and ANSI/ISEA Z87.1-2010
• 2-piece snap-on/snap-off strap
• Anti-scratch/anti-fog lens
• Speed clip Quick-Adjust System
FP3
ESS FirePro™ 1971 Goggles
• NFPA 1971-2013 Certified and ANSI/ISEA Z87.1-2010
• 1-piece wraparound strap
• Anti-scratch/anti-fog lens
• Speed clip Quick-Adjust System
www.bullard.com 71
FX/PX Series
Accessories &
Replacement Parts
IZ2
Innerzone 2B
FX/PX: Accessories &
Replacement Parts
IZ3
Innerzone 3B
• NFPA 1971-2013 Certified and ANSI/ISEA Z87.1-2010
• 1-piece wraparound strap
• Anti-scratch/anti-fog lens
• Speed clip Quick-Adjust System
R112
Crown Strap Assembly
• Made of Nomex®
• Includes crown pad (R636)
R144
Chinstrap
• Made of Nomex®
• Quick-Release buckle and Postman’s Slide Fastener
• Includes spacers and screws for mounting
R146
Chinstrap
• Made of Nomex®
• Quick-Release
• Includes spacers and screws for mounting
R151
Faceshield Mounting Hardware Kit
• Compatible with R330 and R325 faceshield
• Aluminum mounting brackets
• Glass reinforced nylon knobs
• Stainless steel studs and brass T-nuts
R160
Leather Ratchet Cover
• Compatible with all Bullard ratchet suspensions
R325
6" Faceshield
• Optically correct polycarbonate faceshield
• Mounting hardware (R151) not included
R330
4" Faceshield
• Optically correct polyarylate faceshield
• Mounting hardware (R151) not included
R400
4-inch Leather Front Mount
• For use with PX, FX, LT, and USRX
R533
Retro-reflective Stripes
• Fluorescent lime-yellow Scotchlite®
• Adhesive-backed
• Size: 1”x 4”
• Set of 5
www.bullard.com 73
FX/PX Series
Accessories &
Replacement Parts
R534
Retro-reflective Stripes
FX/PX: Accessories &
Replacement Parts
R628
U-Fit Ratchet Height Adjuster
R635
Cotton Brow Pad
• Made of Jersey knit cotton
• Fire-retardant
R635L
Leather Brow Pad
• Made of leather
• Fire-retardant
R637
Sure-Lock® Ratchet Headband with Cotton Brow Pad
• Includes: R635-jersey knit brow pad, R628-height adjuster, R160-leather
ratchet cover
R637L
Sure-Lock® Ratchet Headband with Leather Brow Pad
• Includes: R635L-leather brow pad, R628-height adjuster, R160-leather
ratchet cover
R721
Ear/Neck Protector
• Made of Nomex®
• Rip-stop
• Flame-retardant cotton lining
• Black color
R726
Ear/Neck Protector with Throat Strap
• Made of Nomex®
• Rip-stop
• Flame-retardant cotton lining
• Black color
R726YLW
Ear/Neck Protector with Throat Strap
• Made of Nomex®
• Rip-stop
• Flame-retardant cotton lining
• Yellow color
R727
FXA1 Ear/Neck Protector with Throat Strap
• Made of Nomex®
• Rip-stop is PBI®/Kevlar®
• Flame-retardant cotton lining
• Light tan color
R741
Ear/Neck Protector
• Made of PBI®/Kevlar®
• Rip-stop
• Flame-retardant cotton lining
• Tan color
R746
Ear/Neck Protector with Throat Strap
• Made of PBI®/Kevlar®
• Rip-stop
• Flame-retardant cotton lining
• Tan color
www.bullard.com 75
FX/PX Series
Accessories &
Replacement Parts
R921
M-PACT Plus Molded Inner Liner System with Cotton Brow Pad
FX/PX: Accessories &
Replacement Parts
R921L
M-PACT Plus Molded Inner Liner System with Leather Brow Pad
• Inner shell with Urethane impact liner
• Includes: R637-Sure-Lock® ratchet headband, R635L-leather brow pad,
R636-cotton crown pad, R112-6-point nylon crown strap assembly,
Velcro® strips
FH Spotlight
comes primarily from the fibers of glass or other materials
firefighting situation. that are bonded together by the resin.
Composite Helmets The challenge in designing an effective composite
Composite helmet shells are a mixture of thermoset resins material is getting the right mix of a good thermoset
and glass fiber. The thermoset resin is the “glue” which resin and high content of glass. The glass fiber is heavier
is needed to hold glass fibers together in a composite than the resin, so getting the right mix also creates the
helmet shell. Thermoset resins are a family of plastics that best potential for a lighter helmet shell. Most fire helmets
do not melt but chemically degrade at high temperatures, today have a glass content of approximately 50 percent.
and thermoset resins are created by mixing two base
materials just like epoxy glues (Epoxy glues are thermoset High Performance Thermoplastics
resins). One of the ingredients is a catalyst that, when Until relatively recently, it was possible to obtain either
combined with the other agents and heat during molding, great heat resistance or great impact resistance, but not
will solidify the mixture, locking itself and the glass fibers both in the same material. Thanks to new thermoplastic
into a rigid state. In compression molding applications, advancements, thermoplastics can now exhibit a high
very little catalyst is used so that the liquid resin remains quality surface finish, impact resistance and heat
stable at room temperature; the heat and pressure of resistance. While today’s advanced thermoplastics can
the molding operation initiates the chemical reaction to perform at temperatures exceeding 500˚ F (260˚ C),
solidify the resin. thermoplastics can be sensitive to some chemical solvents.
www.bullard.com 77
Fire Helmet
LT Series
LT Colors:
LTX
• Ultem® Thermoplastic outer shell
• M-PACT inner liner system (R929)
• Sure-Lock® ratchet suspension (R624)
• Black rip-stop Nomex® ear/neck protector (R721)
• Quick-Attach faceshield (R330)
• Quick-Release buckle chinstrap (R142)
• Removable fire resistant cotton brow pad (R634)
• Nomex® chinstrap with Quick-Release buckle and
Postman’s Slide Fastener (R144)
• Leather ratchet cover (R160)
• Scotchlite® reflective striping (R533)
(shown non-standard)
LT Series
• Nomex® chinstrap with Quick-Release buckle and Postman’s Slide Fastener (R144)
• Leather ratchet cover (R160)
• TrakLite® (TL)
• Scotchlite® reflective striping (R533)
www.bullard.com 79
Fire Helmet
Customizable Parts
LT Series
1. Crown Strap Assembly: 4-point suspension system for 8. TrakLite®: Featuring multiple forward-facing, long
extra protection against impact. lasting, and bright LED lights. TrakLite® is integrated
2. M-PACT Inner Liner System: Superior protection with into the helmet design for excellent weight balance
SmartRidge design, while remaining lightweight. and illumination. Added safety features include the
3. Sure-Lock® Ratchet Headband with Brow Pad: rear buddy indicator light, long battery life (AAA
Sure-Lock® is made exclusively by Bullard. Optional batteries), and easy on/off operation.
leather brow pad available. 9. Ultem® Thermoplastic Outer Shell: Durable,
4. Scotchlite® Reflective Striping: The highest quality heat-resistant shell is color pigment molded
reflective material available. Retains reflectivity to throughout. Edge beading will not melt, drip or
500°F (260°C). No burning, cracking or peeling. ignite when tested through NFPA.
Available standard in lime-yellow and orange or 10. Shell available in 7 colors.
triple trim for accountability.
5. Nomex® Chinstrap: Easy to adjust and secure.
6. Ear & Neck Protector: Choose between Nomex® or Available accessories &
PBI®/Kevlar® material, with or without throat strap. Replacement parts:
7. Face Protection: 4” or 6” optically correct faceshield
(p 81-84)
eliminates distortion and reduces eye stress and
fatigue. Two types of industry-leading ESS goggles
also available.
Replacement Parts
LT: Accessories &
• For use with ESS goggles
• Made of flame-retardant Nomex®
FP4
ESS FirePro™ 1971 Goggles
• NFPA 1971-2013 Certified
• 2-piece strap, stainless steel machine screws and nuts
• Anti-scratch/anti-fog lens
• Speed clip Quick-Adjust System, glass reinforced nylon Quick-Attach blades
IZ4
Goggle with Quick-Attach Blades
• NFPA 1971-2013 Certified
• 2-piece strap, stainless steel machine screws and nuts
• Anti-scratch/anti-fog lens
• Speed clip Quick-Adjust System, glass reinforced nylon Quick-Attach blades
R141
Chinstrap
• Made of Nomex®
• Quick-Release buckle and Postman’s Slide Fastener
• Includes spacers and screws for mounting
R142
Chinstrap
• Made of Nomex®
• Quick-Release
• Includes spacers and screws for mounting
R154
Faceshield Mounting Hardware Kit
• Compatible with R330 and R325 faceshield
• Aluminum washers
• Glass reinforced nylon knobs and Quick-Attach blades
• Stainless steel studs and brass T-nuts
www.bullard.com 81
LT Series
Accessories &
Replacement Parts
R155
Quick-Attach Goggle Hardware Kit
Replacement Parts
LT: Accessories &
R160
Leather Ratchet Cover
• Compatible with all Bullard ratchet suspensions
R325
6" Faceshield
• Optically correct polycarbonate faceshield
• Mounting hardware (R154) not included
R330
4" Faceshield
• Optically correct polyarylate faceshield
• Mounting hardware (R154) not included
R400
4-Inch Leather Front Mount
• For use with PX, FX, LT, and USRX
R533
Retro-reflective Stripes
• Fluorescent lime-yellow Scotchlite®
• Adhesive-backed
• Size: 1”x 4”
• Set of 5
R534
Retro-reflective Stripes
• Fluorescent red-orange Scotchlite®
• Adhesive-backed
• Size: 1”x 4”
• Set of 5
Replacement Parts
LT: Accessories &
• Includes: R634-jersey knit brow pad, R628-height adjuster, R160-leather
ratchet cover
R624L
Sure-Lock® Ratchet Headband with Leather Brow Pad
• Includes: R634L-leather brow pad, R628-height adjuster, R160-leather
ratchet cover
R628
U-fit Ratchet Height Adjuster
R634
Cotton Brow Pad
• Made of Jersey knit cotton
• Fire-retardant
R634L
Leather Brow Pad
• Made of leather
• Fire-retardant
R721
Ear/Neck Protector
• Made of Nomex®
• Rip-stop
• Flame-retardant cotton lining
• Black color
R721YLW
Ear/Neck Protector
• Made of Nomex®
• Rip-stop
• Flame-retardant cotton lining
• Yellow color
www.bullard.com 83
LT Series
Accessories &
Replacement Parts
R726
Ear/Neck Protector with Throat Strap
Replacement Parts
Made of Nomex®
LT: Accessories &
•
• Rip-stop
• Flame-retardant cotton lining
• Black color
R726YLW
Ear/Neck Protector with Throat Strap
• Made of Nomex®
• Rip-stop
• Flame-retardant cotton lining
• Yellow color
R741
Ear/Neck Protector
• Made of PBI®/Kevlar®
• Rip-stop
• Flame-retardant cotton lining
• Tan color
R746
Ear/Neck Protector with Throat Strap
• Made of PBI®/Kevlar®
• Rip-stop
• Flame-retardant cotton lining
• Tan color
R929
M-PACT Inner Liner System with Cotton Brow Pad
• Includes: R624-Sure-Lock® ratchet headband, R634-jersey knit brow pad,
nylon crown strap assembly, Velcro® strips, black suspension ring
R929L
M-PACT Inner Liner System with Leather Brow Pad
• Includes: R624-Sure-Lock® ratchet headband, R634L-leather brow pad, nylon
crown strap assembly, Velcro® strips, black suspension ring
In This
Section
• AX Series
• AX Series Replacement Parts
www.bullard.com
Fire Helmet
AX Series
AX/FX/UST Colors:
AX
highlights:
• Use with FX fire helmet
• Thermoglas® outer shell
• M-PACT Plus molded inner liner system (R921)
• Sure-Lock® ratchet headband and 6-point nylon
crown strap (R625)
• Nomex® chinstrap with Quick-Release buckle and
Postman’s Slide Fastener (R144)
• 6” gold-coated optically-correct faceshield (R340)
• Aluminized PBI®/Kevlar® helmet cover (R260)
• Aluminized PBI®/Kevlar® shroud (R757)
AX Series
AXMILB - Use with FX
• Thermoglas® outer shell
• M-PACT Plus molded inner liner system (R921)
• Sure-Lock® ratchet headband and 6-point nylon crown strap (R625)
• Nomex® chinstrap with quick-release buckle and postman’s slide fastener (R144)
• 6” gold-coated optically-correct faceshield (R340)
• Aluminized PBI®/Kevlar® helmet cover (R260)
• Military aluminized PBI®/Kevlar® shroud (R758)
• Bottle cover (R761)
• Accommodates chem-warfare mask
www.bullard.com 87
Fire Helmet
Configurations
AX Series can withstand
high levels of heat
associated with
proximity firefighting.
AX Series
1. Crown Strap Assembly with Crown Pad: 6-point attaching to the aluminized shroud.
suspension system with soft crown pad for extra 6. Aluminized PBI®/Kevlar® 4-layer Shroud: Attach
comfort and protection against impact. with snaps to the aluminized helmet cover to block
2. Full Inner Impact Liner System: Protects head ingress of heat and foreign matter.
against heat rise and extra protection. 7. 6” Gold-coated Faceshield: NFPA 1971 requires the
3. Sure-Lock® Ratchet Headband with Brow Pad: use of a 6” gold-coated faceshield for proximity fire
Sure-Lock® is made exclusively by Bullard. Optional fighting, with anti-scratch lens coating to maximize
leather brow pad available. durability.
4. Thermoglas® or Thermoplastic Outer Shell: Choice of
helmet platform and material. Available accessories &
5. Aluminized Helmet Cover: Features an elastic edge Replacement parts:
binding and Velcro® tabs for easy installation and
(p 90-91)
a secure fit over the outer shell and eight snaps for
www.bullard.com 89
AX Series
Accessories &
Replacement Parts
R151
Faceshield Mounting Hardware Kit for AXFX
• Compatible with R340 faceshield
• Aluminum mounting brackets
• Glass reinforced nylon knobs
• Stainless steel studs and brass T-nuts
Replacement Parts
AX: Accessories &
R152
Faceshield Mounting Hardware Kit for AXUST
• Compatible with R340 faceshield
• Aluminum mounting brackets
• Glass reinforced nylon knobs
• Stainless steel studs and brass T-nuts
R154
Faceshield Mounting Hardware Kit for AXUSRX
• Compatible with R40 faceshield
• Aluminum washers
• Glass reinforced nylon knobs and Quick-Attach blades
• Stainless steel studs and brass T-nuts
R259
Helmet Cover for AXUSRX
• Made of aluminized PBI®/Kevlar®
• NFPA 1971 compliant
R260
Helmet Cover for AXFX
• Made of aluminized PBI®/Kevlar®
• NFPA 1971 compliant
R261
Helmet Cover for AXUST
• Made of aluminized PBI®/Kevlar®
• NFPA 1971 compliant
Replacement Parts
AX: Accessories &
R756
Shroud
• Made of aluminized PBI®/Kevlar® short facepiece
• Covers ears, neck, face, and shoulders
• For use with R259-helmet cover with snaps (AXUSRX)
R757
Shroud
• Made of aluminized PBI®/Kevlar® short facepiece
• Covers ears, neck, face, and shoulders
• For use with R260 and R261 helmet cover with snaps
R758
Shroud
• Made of aluminized PBI®/Kevlar®
• Covers ears, neck, face, and shoulders
• For use with R260 and R261 helmet cover with snaps
• Accommodates chem-warfare mask
R761
Bottle Cover
• Made of aluminized PBI®/Kevlar®
www.bullard.com 91
Wildland Fire
Helmets
Wildland Fire
Helmets
In This
Section
• Wildfire® Series
• Accessories & Replacement Parts
FH911C FH911H
Wildfire® Series
Cap style full brim style
highlights:
• Thermoplastic shell • Adjustable chinstrap (R50) or (R51)
• Cap style helmet (FH911C), full brim helmet (FH911H), • 6-point suspension (FRS6PC)
or extra-large full brim helmet (FH911XL) • Cotton brow pad (RBPCOTTON)
• 3 goggle clips (GC100) • 3 Velcro® material attachment strips inside shell (R220)
• 4 reflective lime-yellow stripes (R536)
www.bullard.com 93
Fire Helmet
Configurations
Bullard Wildfire® sets
the standard in wildland
firefighting.
• 3 goggle clips
• 4 reflective lime-yellow stripes (R536)
• Adjustable chinstrap (R50)
• 6-point Sure-Lock® ratchet (FRS6RC) or pinlock (FRS6PC) suspension
• Cotton brow pad (RBPCOTTON)
• 3 Velcro® material attachment strips inside shell
• Leather ratchet cover (R160)
Wildfire® Series
1. Crown Straps and Replaceable Cotton Brow Pad: Available standard in lime-yellow and orange or
6-point suspension system provides extra level triple trim for accountability.
of comfort. Available as a pinlock or ratchet 5. Chinstrap with Postman’s Slide: Easy to adjust
suspension. Can replace brow pad with RBPCOOL, and secure.
RBPCOTTON, or RBPVINYL. 6. Goggle Clips: Keep your goggles in place; no
2. Leather Ratchet Cover: Available on ratchet models. slipping or sliding on the helmet.
Durable and comfortable leather ratchet cover is 7. Under Brim Anti-glare Strip: Increases the wearer’s
replaceable in case of damage. ability for clear, unobstructed vision free of light glare.
3. High-Heat Thermoplastic Outer Shell: A specially 8. Shell available in 7 colors.
formulated advanced color-through thermoplastic shell
with the ultimate in impact and penetration resistance.
4. Scotchlite® Reflective Striping: The highest quality Available accessories &
reflective material available. Retains reflectivity to Replacement parts:
500°F (260°C). No burning, cracking or peeling.
(p 96-100)
www.bullard.com 95
Wildfire® Series
Accessories &
Replacement Parts
100G
Gold Line® Brackets
• Front mounting aluminum bracket
• Use with cap style (FH911C)
112G
Gold Line® Brackets
• Front mounting aluminum bracket
• Use with full brim style (FH911H)
& Replacement Parts
Wildfire: Accessories
680P
Visor
• Clear, heat-formed, multi-fit polycarbonate visor
• Size: 6”x 15” x 0.080”
• Use with Bullard brackets and most competitive models
860P
Visor
• Clear, heat-formed, multi-fit polycarbonate visor
• Size: 8”x 15” x 0.060”
• Use with Bullard brackets and most competitive models
8S24
Visor
• Mesh, black screen visor
• Size: 8”x 15” x 24 mesh
• Use with Bullard brackets
EL1
Replacement Clear Goggle Lens
• Compatible with XTO and WFB goggles
• NOT NFPA-compliant
• Available as 10-pack
ES5
Innerzone 1-piece Strap
• Compatible with XTO and WFB goggles
• Available as 10-pack
ET
Replacement Tear-off Lens Cover
• Compatible with XTO and WFB goggles
• Available as 6 lens/pack
FRS6PC
Replacement Suspension
• 6-point self-sizing pinlock suspension with cotton brow pad
• 2 vertical adjustment positions in front, 3 in rear
• For use with current Wildfire® models (manufactured since March 2008)
FRS6RC
Replacement Suspension
• 6-point Sure-Lock® ratchet suspension with cotton brow pad
• For use with current Wildfire® models (manufactured since March 2008)
www.bullard.com 97
Wildfire® Series
Accessories &
Replacement Parts
GC100
Goggle Clips
• Self-adhesive
• Available as set of 3
R220
Velcro® Kit
• Hook ONLY
• Available as 3 pieces/pack
& Replacement Parts
Wildfire: Accessories
R222
Ear/Neck/Face Shroud
• Made of Nomex®
• Rip-stop
• Yellow color
R223
Ear/Neck/Face Shroud
• Made of Nomex®
• Rip-stop
• Flame-retardant cotton lining
• Yellow color
R50
Chinstrap
• Made of Nomex®
• Postman’s Slide Fastener
R51
Chinstrap
• Made of Nomex®
• Quick-Release
R536
Retro-reflective Stripes
• Fluorescent lime-yellow Scotchlite®
• Adhesive-backed
• Size: 1”x 4”
R537
Retro-reflective Stripes
• Fluorescent red-orange Scotchlite®
• Adhesive-backed
• Size: 1”x 4”
• Set of 4
R721YLW
Ear/Neck Protector
• Made of Nomex®
• Rip-stop
• Flame-retardant cotton lining
• Yellow color
R726YLW
Ear/Neck Protector with Throat Strap
• Made of Nomex®
• Rip-stop
• Flame-retardant cotton lining
• Yellow color
RBPCool
Polartec® Replacement Brow Pad
• Wicking material moves sweat away from the worker’s brow
• Fits all Bullard suspensions
• Easy, Velcro® design
www.bullard.com 99
Wildfire® Series
Accessories &
Replacement Parts
RBPCOTTON
Cotton Replacement Brow Pad
• Large, absorbent cotton replacement brow pad
• Fits all Bullard suspensions
• Easy, Velcro® design
RBPVINYL
Vinyl Replacement Brow Pad
• Large, easy-to-clean vinyl replacement brow pad
• Fits all Bullard suspensions
• Easy, Velcro® design
& Replacement Parts
Wildfire: Accessories
UBG
Underbrim Anti-glare Decal
• Reduces glare
• For all helmets, hard hats and caps
• Hard hat not included
WFB
ESS Goggle
• ANSI/ISEA Z87.1-2010 Certified
• 1-piece wraparound strap
• Anti-scratch/anti-fog lens
• Speed clip Quick-Adjust System
XTO
ESS Goggle
• ANSI/ISEA Z87.1-2010 Certified
• 1-piece wraparound strap
• Anti-scratch/anti-fog lens
• Speed clip Quick-Adjust System and extra cushion face foam
In This
Section
• USRX Series
• Advent® Series
• Accessories & Replacement Parts
www.bullard.com
Fire Helmet
USRX Series
USRX Colors:
USRX
highlights:
• Ultem® thermoplastic outer shell with M-PACT inner
USRX Series
(shown non-standard)
USRX Series
1. High Heat Thermoplastic Outer Shell: A specially 6” optically correct faceshields that eliminate
formulated advanced color-through thermoplastic shell distortion, reducing eye stress, and fatigue.
with the ultimate in impact and penetration resistance. 7. Sure-Lock® Ratchet Headband with Brow Pad:
2. M-PACT Inner Liner System: Superior protection Sure-Lock® is made exclusively by Bullard. Optional
is provided by Bullard’s patented M-PACT inner leather brow pad available.
liner with SmartRidge design, providing increased 8. Ear & Neck Protector: Choose between a Nomex® or
protection while remaining lightweight. PBI®/Kevlar® material.
3. Scotchlite® Reflective Striping: The highest quality 9. Optional Decals: Customize your helmet with
reflective material available. Retains reflectivity to Bullard decals.
500°F (260°C). No burning, cracking or peeling. 10. Shell available in 7 colors.
4. 3-point Chinstrap with Postman’s Slide: Easy to
adjust and secure.
5. Quick-Attach Blade System: The easiest way Available accessories &
to quickly change out face protection, offered Replacement parts:
exclusively by Bullard.
(p 104-107)
6. Face Protection: Two types of industry leading
ESS goggles are available. Also offered are 4” or
www.bullard.com 103
USRX Series
Accessories &
Replacement Parts
Essarslv-n
Goggle Sleeve
• For use with ESS goggles
• Made of flame-retardant Nomex®
FP4
ESS FirePro™ 1971 Goggles
• NFPA 1971-2013 Certified
• 2-piece strap, stainless steel machine screws and nuts
• Anti-scratch/anti-fog lens
• Speed clip Quick-Adjust System, glass reinforced nylon Quick-Attach blades
IZ4
Goggle with Quick-Attach Blades
USRX: Accessories &
Replacement Parts
R154
Faceshield Mounting Hardware Kit
• Compatible with R330 and R325 faceshield
• Aluminum washers
• Glass reinforced nylon knobs and Quick-Attach blades
• Stainless steel studs and brass T-nuts
R155
Quick-Attach Goggle Hardware Kit
• Only compatible with IZ4 and FP4
• Glass reinforced nylon Quick-Attach blades
• Stainless steel machine screws and nuts
R160
Leather Ratchet Cover
• Compatible with all Bullard ratchet suspensions
R325
6" Faceshield
• Optically correct polycarbonate faceshield
• Mounting hardware (R154) not included
R330
4" Faceshield
R400
4-Inch Leather Front Mount
• For use with PX, FX, LT, and USRX
R533
Retro-reflective Stripes
• Fluorescent lime-yellow Scotchlite®
• Adhesive-backed
• Size: 1”x 4”
• Set of 5
R534
Retro-reflective Stripes
• Fluorescent red-orange Scotchlite®
• Adhesive-backed
• Size: 1”x 4”
• Set of 5
www.bullard.com 105
USRX Series
Accessories &
Replacement Parts
R624
Sure-Lock® Ratchet Headband with Cotton Brow Pad
• Includes: R634-jersey knit brow pad, R628-height adjuster, R160-leather
ratchet cover
R624L
Sure-Lock® Ratchet Headband with Leather Brow Pad
• Includes: R634L-leather brow pad, R628-height adjuster, R160-leather
ratchet cover
R634
Cotton Brow Pad
USRX: Accessories &
Replacement Parts
R634L
Leather Brow Pad
• Made of leather
• Fire-retardant
R721
Ear/Neck Protector
• Made of Nomex®
• Rip-stop
• Flame-retardant cotton lining
• Black color
R721YLW
Ear/Neck Protector
• Made of Nomex®
• Rip-stop
• Flame-retardant cotton lining
• Yellow color
R726YLW
Ear/Neck Protector with Throat Strap
• Made of Nomex®
• Rip-stop
• Flame-retardant cotton lining
• Yellow color
R741
Ear/Neck Protector
R746
Ear/Neck Protector with Throat Strap
• Made of PBI®/Kevlar®
• Rip-stop
• Flame-retardant cotton lining
• Tan color
R929
M-PACT Inner Crown System with Cotton Brow Pad
• Includes: R624-Sure-Lock® ratchet headband, R634-jersey knit brow pad,
nylon crown strap assembly, Velcro® strips, black suspension ring
R929L
M-PACT Inner Liner System with Leather Brow Pad
• Includes: R624-Sure-Lock® ratchet headband, R634L-leather brow pad, nylon
crown strap assembly, Velcro® strips, black suspension ring
www.bullard.com 107
Fire Helmet ®
Advent Series
Advent® Colors:
A1 A2
Advent® Series
highlights:
• Thermoplastic alloy shell • 2-point chinstrap with dielectric Quick-Release
• EPS foam impact liner buckle - A1 ONLY (A110)
• EPS foam crown cushion • 3-point cradle chinstrap with dielectric Quick-Release
• ABS inner shell buckle - A2 ONLY
• 8-point Flex-Gear® ratchet suspension (ADRTSL) • Front and side decals available for customization
Advent® Series
1. Tough Thermoplastic Outer Shell: Provides superior 6. Decals and Pad Printing: Customize your helmet
impact and penetration protection over a wide range of with a Bullard decal on the front or sides. Pad
temperatures. printing is available in 8 locations.
2. ABS and Foam Core Inner Shell: Protects by 7. Shell available in 5 colors.
distributing forces of impact over a wide area.
3. 2- or 3-point Chinstrap with Quick-Release Buckle: Available accessories &
Provides safety, versatility, and security. Replacement parts:
4. Flex-Gear® Ratchet Headband: Offers quick
(p 110-112)
adjustment and great fit.
5. 8-point Crown Strap System: Gives stability and
comfort to the end-user.
www.bullard.com 109
Advent® Series
Accessories &
Replacement Parts
A101
Brow Pad
• Easy-to-clean vinyl replacement brow pad
A110
Chinstrap
• Made of Nylon
• 2-point
• Quick-Release buckle
• Includes spacers and screws for mounting
ADFB
Accessory Blades
Advent®: Accessories
& Replacement Parts
ADRTSL
Replacement Suspension
• 8-point Flex-Gear® ratchet with foam-backed vinyl brow and crown pad
EL1
Replacement Clear Goggle Lens
• Compatible with XTO and WFB goggles
• NOT NFPA-compliant
• Available as 10-pack
EL2
Replacement Tinted Goggle Lens
• Compatible with XTO and WFB goggles
• NOT NFPA-compliant
• Available as 10-pack
Essarslv-n
Goggle Sleeve
• For use with ESS goggles
• Made of flame-retardant Nomex®
ET
Replacement Tear-off Lens Cover
Advent®: Accessories
& Replacement Parts
• Compatible with XTO and WFB goggles
• Available as 6 lens/pack
R325
6" Faceshield
• Optically correct polycarbonate faceshield
• Mounting hardware (ADFB) not included
R330
4" Faceshield
• Optically correct polyarylate faceshield
• Mounting hardware (ADFB) not included
R533
Retro-reflective Stripes
• Fluorescent lime-yellow Scotchlite®
• Adhesive-backed
• Size: 1”x 4”
• Set of 5
www.bullard.com 111
Advent® Series
Accessories &
Replacement Parts
R534
Retro-reflective Stripes
• Fluorescent red-orange Scotchlite®
• Adhesive-backed
• Size: 1”x 4”
• Set of 5
WFB
ESS Goggle
• ANSI/ISEA Z87.1-2010 Certified
• 1-piece wraparound strap
• Anti-scratch/anti-fog lens
• Speed clip Quick-Adjust System
XTO
ESS Goggle
Advent®: Accessories
& Replacement Parts
In This
Section
• Magma™
www.bullard.com
Fire Helmet
Magma Series
Magma™ Colors:
™
Black White Red Fluorescent
Red
Magma™ Helmets are EN 443-2008 Certified; Visor
and Eye Protection is EN 14458-2004 Certified. Orange Yellow Fluorescent Glow
Yellow
NOTE: Our European style FX (FXE) complies with
NFPA and CE requirements.
Green Blue Silver
The new Magma™ helmet system is based on a
platform that enables you to configure your individual
helmet. Whether a type A half-shell helmet or type B
three-quarter-shell helmet, the construction kit offers
it all, while keeping the design thoroughly consistent.
The system allows for customized choices without
compromising comfort, safety and functionality.
Type A Type B
Half-size shell Three-Quarter-Size shell
Magma™ Series
highlights:
• The outer shell and visor isolates the entire inside of the entire face, leaving enough space for goggles or
the helmet system, protecting against heat, flames, a respirator mask.
sparks, and fluids. • The helmet light adaptor is attached at the
• The head ring’s simple operation makes it easy to side of the helmet, below the eye line, and can
adjust front and rear height settings and allows for accommodate most types of helmet lights.
head sizes of 6.25-8.00 in (50-65 cm). • Radio with bone or swan microphones can be easily
• The strap system’s x-shaped design automatically mounted without tools to interior attachment points.
adjusts for maximum fit and comfort. • The ear-neck protector is made from Nomex®, and
*Optional: chin strap with fireman’s buckle can alternately be worn as a full face protector.
• The three-dimensional visor provides maximum • Contact Bullard for complete ordering information.
upper and lateral field of view, while also covering
Ornamentation
In This
Section
• Leather Front Styles Helmet
• Leather Front Badges
& Decals
• Scotchlite® Letters & Numbers
• Front Decals
• Crescent Lettering
• Ceremonial Plaques
www.bullard.com
Helmet Ornamentation
Leather Front Styles
Badge
FIELD HEIGHTS 4”, 5”, and 6” Leather Fronts with Metal Badge
GAR
• Available in gold or silver
• Choose between small (1.0”) or large (1.6”)
LIEUTENANT • Genuine leather colors: red, black, blue, green, white, orange, and yellow
HAMILTON • Patent leather colors: red, black, and white
Decal
INGFIELD 4”, 5”, and 6” Leather Fronts with Decal
SPR
LIEUTENANT • Available in gold or silver
• Choose between small (1.0”) or large (2.0”)
• Genuine leather colors: red, black, blue, green, white, orange, and yellow
• Patent leather colors: red, black, and white
FDNY
6” New York Style Front with Decal, Hot-stamp, or Sewn Passport Patch
98 •
•
For use with UST helmets
Genuine leather colors: red, black, blue, green, white, orange, and yellow
• Patent leather colors: red, black, and white
DELLINGER
magnetic passport
ANDOVER 6” Leather Fronts with Decal, Hot-stamp, or Sewn Magnetic Passport Patch
• For use with UST helmets
• Removable passport badge attaches with magnetic back
• Genuine leather colors: red, black, blue, green, white, orange, and yellow
FANNING
• Patent leather colors: red, black, and white
Leather Front
passport
Styles
DANIEL 4”, 5”, and 6” Leather Fronts with Hot-stamp, or Sewn Velcro® Passport Patch
• Removable passport attaches with Velcro®
• Genuine leather colors: red, black, blue, green, white, orange, and yellow
• Patent leather colors: red, black, and white
SLOAN
recessed
EHEAD FIRE 4”, 5”, and 6” Leather Fronts with Recessed Letters
MOR
CC
P RA HIO
U • Genuine leather colors: red, black, blue, green, white, orange, and yellow
• Patent leather colors: red, black, and white
FD
CAPTAIN
Stamped
4”, 5”, and 6” Leather Fronts with Hot-stamp
MATTHEWS • Genuine leather colors: red, black, blue, green, white, orange, and yellow
• Patent leather colors: red, black, and white
Helmet Ornamentation
Passport Patches
FDNY Passport Patch
98
6” FDNY Passport Patch with Decal, Hot-stamp, or Sewn Letters
• Genuine leather colors: red, black, blue, green, white, orange, and yellow
• Patent leather colors: red, black, and white
Leather Front
MAGNETIC PASSPORT PATCH
Styles
6” Magnetic Passport Patch with Decal, Hot-stamp, or Sewn Letters
• Genuine leather colors: red, black, blue, green, white, orange, and yellow
• Patent leather colors: red, black, and white
STANDARD
4”, 5”, and 6” Standard Velcro® Passport Patch with Decal, Hot-stamp, or Sewn Letters
• Genuine leather colors: red, black, blue, green, white, orange, and yellow
• Patent leather colors: red, black, and white
www.bullard.com 117
Helmet Ornamentation
Leather Front Styles
Leather Front
Configurations (401-431) 431
4” Leather Fronts
• Various placement options for text, 400P 401* 402*
decals, and badges H B,r,H,S,D B,H,s,D
• B=Badge, R=Recessed, H=Hot Stamp,
S=Sewn, D=Decal, P=Passport
*Small badges and decals only
404* 404P*
B,H,S,d H,d
Leather Front
Configurations (600M-6nY)
6” Leather Fronts
PPL/PPLM PPL/PPLM
• Various placement options for text,
decals, and badges
• B=Badge, R=Recessed, H=Hot Stamp,
600C 600M* 600P*
S=Sewn, D=Decal, P=Passport
D h,s,d,P R,H,S,D,P
*Small badges and decals only
Leather Front
Helmet Ornamentation
Leather Front Decals
DecalS (a-H)
Leather Front Decals
Leather Front
white background
• Large or small sizes
• Call Customer Service for additional decals Decal a Decal B Decal C
www.bullard.com 119
Helmet Ornamentation
Scotchlite Letters
®
& Numbers
AZ 01
OR400 OR450
2” Letter 2” Numbers
• Adhesive-backed • Adhesive-backed
• Lemon-yellow • Lemon-yellow
AZ 01
OR401 OR451
2” Letter 2” Numbers
• Adhesive-backed • Adhesive-backed
• Red • Red
AZ 01
or402 or452
2” Letter 2” Numbers
• Adhesive-backed • Adhesive-backed
• White • White
AZ 01
Or500 Or550
2” Letter 2” Numbers
• Adhesive-backed • Adhesive-backed
• Lime-yellow • Lime-yellow
Scotchlite® Letters
AZ 01
& Numbers
Or501 Or551
2” Letter 2” Numbers
• Adhesive-backed • Adhesive-backed
• Red-orange • Red-orange
AZ 01
Or502 Or552
2” Letter 2” Numbers
• Adhesive-backed • Adhesive-backed
• Silver • Silver
or145
3” Star Of Life
• 2-color
• White on blue
• Design: Star with staff of life
or150
3” Front Decal
• 1-color
• Black design on reflective white
• Design: “Firefighter” with eagle emblem
or110
3” Front Decal
• 2-color
• Black and gold design on reflective white
• Design: “Chief” with 5 bugles
Front Decals
or130
3” Front Decal
• 2-color
• Black and silver design on reflective silver
• Design: “Captain” and 2 axes
or131
3” Front Decal
• 2-color
• Black and silver design on reflective silver
• Design: “Captain” with 2 bugles
www.bullard.com 121
Helmet Ornamentation
Front Decals
or132
3” Front Decal
• 2-color
• Black and silver design on reflective silver
• Design: “Lieutenant” with 1 ax
or133
3” Front Decal
• 2-color
• Black and silver design on reflective silver
• Design: “Lieutenant” with 1 bugle
or120
3.5” Front Decal
• 2-color
• Black and silver design on reflective white
• Design: “Deputy chief” with 4 bugles
or121
3.5” Front Decal
• 2-color
• Black and silver design on reflective white
• Design: “Asst. chief” with 3 bugles
or122
3.5” Front Decal
• 2-color
Front Decals
or123
3.5” Front Decal
• 2-color
• Black and silver design on reflective white
• Design: “DEPUTY CHIEF” with 3 bugles
or124
3.5” Front Decal
• 2-color
• Black and silver design on reflective white
• Design: “ASST CHIEF” with 3 bugles
Crescent Lettering
OR311 OR312 OR313 OR315
www.bullard.com 123
Helmet Ornamentation
Ceremonial Plaques
FIREPLAQUE
Fire Helmet Ceremonial Plaque
• This unique presentation piece is a memorable reward for years of
dedicated service. It can also be used to commemorate a groundbreaking
event or thank sponsors for their participation on a special project. Each
16” x 20” plaque includes a traditional fire helmet shell and a personalized
engraved plate.
LFPLAQUE
Leather Front Ceremonial Plaque
• The leather front ceremonial plaque includes a 6” genuine leather front and
personalized engraved plate. This can be given to commemorate years in
service, special events, and any moment deserving unique recognition.
Ceremonial
Plaques
In This
Section
• Isotherm® Cooling Vests
www.bullard.com
Body Temperature Protection
Isotherm Vests ®
ISO2
Isotherm® 2 Large Cooling Vest
• Fits M-L sizes (32”-42”)
• Includes vest and one set of packs
• Flame-retardant fabric
• Dark blue
ISO2XL
Isotherm® 2 Extra-Large Cooling Vest
• Fits XL-2XL sizes (42”-52”)
• Includes vest and one set of packs
• Flame-retardant fabric
• Dark blue
ISO2HY
Isotherm® 2 Large Cooling Vest
• Fits M-L sizes (32”-42”)
• Includes vest and one set of packs
• Fluorescent yellow fabric
ISO2HYXL
Isotherm® 2 Extra-Large Cooling Vest
• Fits XL-2XL sizes (42”-52”)
• Includes vest and one set of packs
• Fluorescent yellow fabric
ISOC2
Isotherm® Class 2 Large Cooling Vest
• Fits XL-2XL sizes (42”-52”)
Cooling Vests
ISO2P
Replacement Packs
• For ISO2, L size (42”) vest
• One set of two packs (front and back)
ISO2V
Replacement Vest
• For ISO2, M-L sizes (32”-42”)
• Vest only
• Flame-retardant fabric
• Dark blue
ISO2XLV
Replacement Vest
• For ISO2, XL-2XL sizes (42”-52”)
• Vest only
• Flame-retardant fabric
• Dark blue
ISOC2V
Replacement Vest
• For ISOC2, XL vest (42”)
• Vest only
• Fluorescent yellow and reflective striping
Cooling Vests
Isotherm®
www.bullard.com 127
Experience Build Your Bullard...
• T
he industry’s first complete online
product configurator
• C
onfigure your Personal Protection
Equipment at www.BuildYourBullard.com
www.bullard.com 129
Catalog
Index
I OR150............................................. 121 R158........................................... 60, 73
OR300............................................. 123 R160...................... 61, 73, 82, 99, 104
ISO2 126 OR301............................................. 123 R172................................................ 105
ISO2HY............................................ 126 OR302............................................. 123 R220.................................................. 98
ISO2HYXL........................................ 126 OR303............................................. 123 R222.................................................. 98
ISO2P.............................................. 126 OR304............................................. 123 R223.................................................. 98
ISO2V.............................................. 127 OR305............................................. 123 R259.................................................. 90
ISO2XL............................................ 126 OR307............................................. 123 R260.................................................. 90
ISO2XLV.......................................... 127 OR308............................................. 123 R261.................................................. 90
ISOC2.............................................. 126 OR309............................................. 123 R309.................................................. 61
ISOC2V............................................ 127 OR310............................................. 123 R325.................... 61, 73, 82, 105, 111
Isotherm®................................ 125–127 OR311............................................. 123 R330.................... 61, 73, 82, 105, 111
IZ2 ........................................... 59, 72 OR312............................................. 123 R334.................................................. 61
IZ3 ........................................... 59, 72 OR313............................................. 123 R340.................................................. 91
IZ4 ......................................... 81, 104 OR315............................................. 123 R400................................... 73, 82, 105
OR316............................................. 123 R533.......................... 73, 82, 105, 111
L OR320............................................. 123 R534.......................... 74, 82, 105, 112
OR326............................................. 123 R535.................................................. 61
LCDGUARD................................. 22, 43 OR327............................................. 123 R536.................................................. 99
LFPLAQUE....................................... 124 OR400............................................. 120 R537.................................................. 99
LTX .................................................. 78 OR401............................................. 120 R539.................................................. 62
OR402............................................. 120 R545.................................................. 62
M OR450............................................. 120 R549.................................................. 62
OR451............................................. 120 R624......................................... 83, 106
Magma™........................................ 114 OR452............................................. 120 R624L....................................... 83, 106
MAGNETIC PASSPORT..................... 116 OR500............................................. 120 R628..................................... 62, 74, 83
MAGNETIC PASSPORT PATCH......... 117 OR501............................................. 120 R634......................................... 83, 106
MCCANTENNA........................... 22, 43 OR502............................................. 120 R634L....................................... 83, 106
ML1 .................................................. 24 OR503............................................... 59 R635........................................... 62, 74
ML2 .................................................. 24 OR550............................................. 120 R635L......................................... 62, 74
MLANTENNA.............................. 22, 43 OR551............................................. 120 R637........................................... 63, 74
MLKNOB.................................... 22, 43 OR552............................................. 120 R637L......................................... 63, 74
MLSTRAP.................................... 23, 43 OR600............................................... 59 R721............................ 63, 74, 83, 106
MLUPGRADE..................................... 24 OR600ML.......................................... 59 R721YLW............... 63, 75, 83, 99, 106
MTSSTRANS2UP................................ 50 R726............................ 63, 75, 84, 107
MX ............................................ 22–23 P R726YLW............... 63, 75, 84, 99, 107
MXPM........................................ 23, 50 R727.................................................. 75
PASSPORT....................................... 116 R741............................ 64, 75, 84, 107
N PNY ................................................ 118 R746............................ 64, 75, 84, 107
POWERHOUSE................................... 28 R756.................................................. 91
NFPANIMH................................. 23, 43 POWERHOUSEKIT.............................. 28 R757.................................................. 91
NFPA Standards................................. 65 PPL/PPLM........................................ 118 R758.................................................. 91
NIMH.......................................... 23, 44 PX .................................................. 68 R761.................................................. 91
R921........................................... 64, 76
O R R921L......................................... 64, 76
R929......................................... 84, 107
OMNI......................................... 23, 50 R50 .................................................. 98 R929L....................................... 84, 107
OMNIONLY................................. 23, 50 R51 .................................................. 98 RBPCOOL.......................................... 99
OR110............................................. 121 R112........................................... 60, 72 RBPCOTTON.................................... 100
OR120............................................. 122 R141.................................................. 81 RBPVINYL........................................ 100
OR121............................................. 122 R142.................................................. 81 RCN17ALK......................................... 28
OR122............................................. 122 R144.................................................. 72 REC2................................................. 25
OR123............................................. 122 R146.................................................. 72 RECESSED........................................ 116
OR124............................................. 122 R148.................................................. 60 RECUPGRADE.................................... 25
OR130............................................. 121 R151........................................... 72, 90
OR131............................................. 121 R152........................................... 60, 90
OR132............................................. 122 R154................................... 81, 90, 104
S
OR133............................................. 122 R155......................................... 82, 104 Save-A-Life Club................................ 14
OR140............................................. 121 R156.................................................. 60 Save or Apprehension Recognition
OR145............................................. 121 R157.................................................. 60 Program..................................... 19
www.bullard.com 131
Americas: Europe: Asia-Pacific:
Bullard Bullard GmbH Bullard Asia Pacific Pte. Ltd.
1898 Safety Way Lilienthalstrasse 12 LHK Building
Cynthiana, KY 41031-9303 53424 Remagen 701, Sims Drive, #04-03
Toll-free within USA: Germany Singapore 387383
877-BULLARD (285-5273) Tel: +49-2642 999980 Tel: +65-6745-0556
Tel: +1-859-234-6616 Fax: +49-2642 9999829 Fax: +65-6745-5176
Fax: +1-859-234-8987
©2013 Bullard. All rights reserved. Advent, Eclipse, Electronic Thermal Throttle, Isotherm, and TacSight are registered trademarks of Bullard. Edge and Magma are
trademarks of Bullard. Velcro is a registered trademark of Velcro USA. Nomex and Kevlar are registered trademarks of DuPont Company. Scotchlite is a registered trademark
of 3M Company. PBI is a registered trademark of Celenese. FirePro is a trademark of ESS, a Subsidiary of Oakley, Inc. Pelican is a trademark of Pelican Products, Inc.