Professional Documents
Culture Documents
DUC630 Jet Nozzle-2
DUC630 Jet Nozzle-2
DUC630 Jet Nozzle-2
Construction DUC/630
Type VDL swirl
Description
Jet nozzles are used for preference where the be adjusted by hand on site. Also, the swivel
supply air from the diffuser has to travel a large movement can be motorized within a range of
distance to the occupied zone. ±30º by electric or pneumatic actuators.
In large rooms, particularly when space span is The well-designed, aerodynamically efficient
of a very long distance (public hall, exhibition shape of DUC/630 results in large air flow rate,
centers, large airport lounges etc.), single long throw and low noise characteristics.
nozzle is often required to have a very large Therefore, they can be used in critical areas
supply air volume (about 6000m3/h) and a very such as large exhibition center, airport etc.
long throw distance (about 50m). The existing
Trox jet nozzle type DUK cannot fully meet the Trox has tested air stream characteristics of
customer’s requirements; for this reason, a DUC/630 under different conditions, and worked
super large jet nozzle type DUC/630 is out corresponding selection program. Selection
developed. can be done based on customer’s requirements
for different supply air conditions to help
Jet nozzle DUC/630 is designed to swivel and customers achieve ideal air distribution
rotate. The direction of the air stream can easily performance.
1
Construction and Dimensions
763 or SQ720
373.7
373.7
630
630
352 502
720
640
3
71
76
0
6
90
91
5
591
640
720
45°
2
Installation and Materials
Construction
Type VDL swirl
Installation Materials
Jet nozzle DUC/630 can be directly connected The discharge nozzle is in aluminum. Circular or
with circular or flexible duct. For connection with square face cover is in rolled galvanized sheet
circular duct, a sealing strip should be placed at steel. The surface can be powder coated in white
the joint; for connection with flexible duct, a (RAL9010) or other RAL colors. Circular spigot
spigot is provided. connection is unfinished in rolled galvanized
sheet steel.
wall
suspension
screw fixing
galvanized steel duct or flexible duct
8×M6
71
0
rivet connection
630
352 or 502
wall
suspension
640
rivet connection
690
630
352 or 502
3
Selection Data and Order Code
The table below gives a guide for selecting the size of jet nozzle DUC/630.
The values shown are determined for an isothermal, single free horizontal air stream. For
detailed selection, please refer to the Trox selection program.
Data for quick selection of jet nozzle DUC/630 (horizontal air flow)
Throw
Air
20m 30m 40m
velocity
vL V △Pt LWA LWNC V △Pt LWA LWNC V △Pt LWA LWNC
m/s m3/h Pa dB(A) NC m3/h Pa dB(A) NC m3/h Pa dB(A) NC
0.25 780 3 <20 <14 1200 8 <20 <14 1600 14 22 16
0.50 1550 13 21 15 2380 33 33 27 3100 51 40 34
1.00 3070 50 40 34 4600 98 51 45 6250 160 58 52
Throw
Air
45m 50m 60m
velocity
vL V △Pt LWA LWNC V △Pt LWA LWNC V △Pt LWA LWNC
m/s m3/h Pa dB(A) NC m3/h Pa dB(A) NC m3/h Pa dB(A) NC
0.25 1800 18 25 19 1980 21 28 22 2400 34 33 27
0.50 3550 65 45 39 3850 74 47 41 4650 100 52 46
1.00 7050 193 62 56 — — — — — — — —
Nomenclature
vL in m/s: Mean air stream velocity
△Pt in Pa: Total pressure drop
LWA in dB(A): A-weighted sound power level
LWNC in dB(A): Noise criteria rating of sound power level spectrum
Order Code
adjustable
State colour
R: circular cover plate
Q: square cover plate }
0: unfinished
Externally mounted 220V,50HZ E1 P0: Powder coated to RAL9010
rotary actuator 24V,50HZ E2 (gloss level=50%)
24V,50HZ,0…10V E3 P1: Powder coated to RAL…
Internally mounted 220V,50HZ E4 (gloss level=50%)
linear actuator 24V,50HZ E5
24V,50HZ,0…10V E6
Order Example:
Make:TROX
Type:DUC-V-R-E5/250/P1/RAL9010
4