Professional Documents
Culture Documents
Packer Test Form Lumina Copper SAC: Client
Packer Test Form Lumina Copper SAC: Client
Packer Test Form Lumina Copper SAC: Client
Client: PACKER TE
Project Number:
Lumina Copper SAC FORM
Task 2000:
Z Geotechnical and Hydrogeological Subsurface Investigation
72.82 ft
3.94 ft
302.06 ft
Field Engineer of g
MWH:H Elevation(m): Borehole Diameter (2 r) : End Hour:
GWL (m) :
G.W.I. 3.08 ft
Pressure Gauge Flowmeter DC Packer
Expansion Cylinder Inflation
: Depth of Pressure
Casing= Pp
Valves 1. Ph = (d top + a) psi Hydrostatic P
PumpL : Length
2. Pw 200 psiof the Test Packer Work
D 3. Pp = (Ph + Pw)*1.2 psi
: Diameter of the Test Packer
HoleInflat
FD
295.04 ft Maximum Allowable Pressure = Pmax
DC
hm Hg FD 1. t = (Hsoil
: Final Depth x soil
of+ the x rock) Corre
HrockTest
300.12 ft
225.30 ft
H(Gravity) Hg 5.
: Pmax
Constant
= ' - HgGravity Head Conv
Corr
334.40 ft
P
17.14 ft
(Saturated Test)
P
Hg =
34.28 ft
L Notes: P
H(Gravity) Hg 1.= Maximum
L / 2 +Allowable
DC + a - Z
Pressure (Pmax) mus
(dry test) (Dry Test)
5.- Pmax = 189.65 - 31.56 = 158.09 ft . Psi PM If RQD is < 75% in the test zone then: a : Heigth of casing above the g
4
Pp = 399 psi
PM1= 20%Pmax= 32 PM2= 40%Pmax= 63 PM3= 60%Pmax= 95
5
PM4= 40%Pmax= 63 PM5= 20%Pmax= 32
6
PACKER TEST PM1 (psi) = 32 PM2 (psi) = 63 PM3 (psi) = 95 PM4 (psi) = 63 PM5 (psi) = 32
7
Time Rflowmeter q Rflowmeter q Rflowmeter q Rflowmeter q Rflowmeter q
(minutes) (m3) (Liters) (m3) (Liters) 8
(m3) (Liters) (m3) (Liters) (m3) (Liters)
FLOW METER
PRESSURE GAUGE
hm = Height of the Gauge Pressure 1.20 m.
a = Height above of the surface 1.50 m.
G.W.L. = Ground Water Level 22.35 m.
Pump
H(Gravity) = Distance from ground-water level to swivel 25.05 m.
hm dTOP = Depth from ground surface to top of testing zone 91.50 m.
H(Gravity)
a dBOTTOM = Depth from ground surface to bottom of testing zone 101.95 m.
If G.W.L. is above test zone a = Inclination with the horizontal 70 deg
G.W.L. H(Gravity) corrected = SIN a x H(Gravity) 23.54 m.
L = Length of the portion of the hole tested 10.45 m.
dTOP H(Gravity) If G.W.L.is 2r = Two times the radius of hole tested (Diameter) 12.26 cm.
below test zone PM = Gauge Pressure
G.W.L. Dp = Head Loss
q = Volume in liters during the test
L K(cm/s)
L/2 0.00... 2.00... 4.00... 6.00... 8.00... 1.00... 1.20... 1.40... 1.60... 1.80...
dBOTTOM
1
2r
2
20.00
65.43 45.7
0.00
10.0 20.0 30.0 40.0 50.0 Q (l/min)
60.0 70.0 80.0 90.0 100.0 110.0