Professional Documents
Culture Documents
Welding Stal 20 PDF
Welding Stal 20 PDF
Welding Stal 20 PDF
EVB Mo ………………………. E1
EVB P 24 ……………………….. E5
EVB 911W……………………….E12
E
Classification:
EN 1599: E Mo B 42
EN 499: E 46 4 MoB 42 H5
DIN 8575: E Mo B 26
AWS A-5.5: E 7018-A1H4
EN ISO 2560-A: E 46 4Mo B 42 H5
EN ISO 2560-B: E 49 18-3M3 A
EN ISO 3580-A: E Mo B 42 H5
EN ISO 3580-B: E 49 18-1M3
EVB Mo
Description and application:
Mo alloyed basic electrode for welding creep resistant steels with yield strength up to 460 C. Suited for working
temperatures for –40 C to 525 C.
Base materials:
DIN: W.Nr.:
Unalloyed steels: St 37.2 to St 52.3 1.0037 to 1.0570
Finegrained steels: WStE 380 to WStE 460 1.8930 to 1.8935
Boiler plates: H I, H II, H III 1.0345, 1.0425, 1.0435
17 Mn4, 19 Mn5, 15 Mo3 1.0481, 1.0482, 1.5415
Pipe steels: St 35.8, St 45.8 1.0305, 1.0405
15 Mo3 1.5415
Steel castings: GS-22 Mo4 1.5419
Elongation A : > 22 %
Redrying temperature:
400 C / 1 h Impact energy KV : > 47 J (-20 C)
> 47 J (-40 C)
Hydrogen content: < 4 ml / 100 g weld metal
* approximate data
EVB MoV
Description and application:
Cr, Mo and V-alloyed basic electrode for welding similarly alloyed steels and steel castings for working
temperatures up to 500 C. Suitable for reparatur-welding CrMoV and CrMnV steels.
Base materials:
DIN: W.Nr.:
Boiler plates: 14 MoV63, 21 MoV53, 1.7715, 1.5404,
17 MoV84, 24 CrMoV 55 1.5406, 1.7733
10CrSiMoV7 1.8075
Steel castings: GS-17 CrMoV 5.11 1.7706
Heat treatment:
Stress relieved: 700 C / 1 h and then cooled on the air.
Elongation A : > 20 %
Redrying temperature:
400 C / 1 h Impact energy KV : > 95 J (+20 C)
* approximate data
EVB CrMo
Description and application:
Cr and Mo-alloyed basic electrode for welding creep resistant steels and steel castings for working
temperature up to 550 C, as for similarly alloyed steels, quenched and tempered for cementation and
nitriding.
Base materials:
DIN: W.Nr.:
Boiler plates and tubes: 13CrMo44, 15CrMo3 1.7335, -
13CrMoV42
(HIV)
Steel for the cementation: 15Cr3, 16MnCr5 1.7015, 1.7131
20MnCr5, 15CrMo5 1.7147, 1.7262
Quenched and tempered steel: 25CrMo4 1.7218
Steel castings: GS-22CrMo5, GS-22CrMo54 1.7354
Heat treatment:
Stress relieved: 680 C / 2 h, oven-cooling down to 300 C and then cooled on the air.
Elongation A : > 20 %
Redrying temperature:
400 C / 1 h Impact energy KV : > 95 J (+20 C)
* approximate data
EVB 2 CrMo
Description and application:
Cr and Mo-alloyed basic electrode for welding creep resistant steels and steel castings for working temperatures
up to 600 C, as for similarly alloyed steels, quenched and tempered for cementation and nitriding.
Base materials:
SIST EN DIN W.Nr.
Heat resistant steel 10CrMo9-10 10CrMo9-10 1.7380
12CrMo9-10 12CrMo9-10 1.7375
10CrSiMoV7 1.8075
Quanched and tempered steel 30CrMoV9 1.7707
Steel casting GS-18CrMo9.10 1.7379
Heat treatment:
Stress relieved: 690 C / 2 h, oven-cooling down to 400 C and then cooled on the air.
Elongation A : > 18 %
Redrying temperature:
400 C / 1 h Impact energy KV : > 95 J (+20 C)
* approximate data
P24
Description and application:
Cr , Cr- Cr- -
600 C.
Base materials
P24
Heat treatment:
2h / 690 C - 400 C . Where PWH
t
Welding current: C
DC +
0,04 0,33 0,6 2,6 0,9 0,2 0,0025
Welding positions:
Mechanical properties: as welded PWHT
2 2
ReL / 0.2: ) > 450 )
2 2
. 840 ) 585-840 )
Redrying temperature: A : %
400 C / 1 h
+20 C) : > 40 J
Hydrogen content:
Welding and packing data:
Welding parameters Packing
Approvals: A
EVB 5 CrMo
Description and application:
Cr and Mo-alloyed basic electrode for welding creep resistant steels and steel castings for working temperatures up
to 600 C. The weld metal is resistant to high hydrogen pressure. The electrode is recommended for applications in
the construction and maintenance of modern power station, oil (cracking plant) and chemical plants.
Base materials:
SIST EN DIN W.Nr.
Heat and H2 resistant steel X12CrMo5 12 CrMo 19 5 1.7362
Heat treatment:
Stress relieved: 730 C / 2 h and then cooled on the air.
Elongation A : > 18 %
Redrying temperature:
400 C / 1 h Impact energy KV : > 70 J (+20 C)
* approximate data
EVB 9 CrMo
Description and application:
Cr and Mo-alloyed basic electrode for welding creep resistant steels and steel castings for working temperatures up
to 600 C. The weld metal is resistant to high hydrogen pressure. The electrode is recommended for applications in
oil and chemical industry.
Base materials:
SIST EN DIN W.Nr.
Heat and H2 resistant steel X11CrMo9-1 X12CrMo9-1 1.7386
X12CrMo7 1.7368
Heat treatment:
Stress relieved: 760 C / 1 h and then cooled on the air.
Elongation A : > 15 %
Redrying temperature:
400 C / 1 h Impact energy KV : > 50 J (+20 C)
* approximate data
EVB CrMoV
Description and application:
Basic electrode alloyed with Cr, Mo and V, suitable for welding similar cast steels. Electrode runs with a stable
arc, low spatter and easy removal slag. It has uniform bead appearance.
Observe specifications on preheating and post weld heat treatment of base materials.
Base materials:
Low alloy cast steels of similar composition - GS 17 CrMoV 5 11
* approximate data
EVB 3 CrMoV
Description and application:
Mo and Cr and V alloyed basic electrode for welding creep resistant steels and steel castings for working
temperatures up to 600 C.
Base materials:
Heat treatment:
Preheating and interpass temperature should be 200-250 C. Stress relieved: 690 - 730 °C / 2h then cooled in
the oven till 300 C.
Elongation A : > 17 %
Redrying temperature:
400 C / 1 h Impact energy KV : > 50 J (+20 C)
350 C / 2 h
Hydrogen content: < 5 ml / 100 g weld metal
* approximate data
EVB 9 CrMoV
Description and application:
Cr and Mo-alloyed basic electrode for welding creep resistant heat treated 9-12% chromium steels, especially for
steels T 91 and T 92, for working temperatures up to 600 C. Preheat and interpass temperatures 200-300 C.
Base materials:
SIST EN DIN W.Nr.
Heat and H2 resistant boiler, X11CrMo9-1 X12CrMo9-1 1.7386
Tube and pipe steel X20CrMoV11-1 X20CrMoV12-1 1.4922
ASTM( A199Gr.T9; A335 Gr.P9; A351; A213/213M Gr.T/P91; GrT/P92)
Heat treatment:
Stress relieved: 750 C / 2 h, oven-cooling down to 300 C and then cooled on the air.
Elongation A : > 16 %
Redrying temperature:
400 C / 1 h Impact energy KV : > 50 J (+20 C)
* approximate data
EVB 91 CrMoV
Description and application:
Cr and Mo-alloyed basic electrode for welding creep resistant heat treated 9-12% chromium steels, especially for
steels T 91 and T 92, for working temperatures up to 600 C. Preheat and interpass temperatures 200-300 C.
Base materials:
SIST EN DIN W.Nr.
Heat and H2 resistant boiler,X11CrMo9-1 X12CrMo9-1 1.7386
tube and pipe steel X20CrMoV11-1 X20CrMoV12-1 1.4922
X20CrMoWV12-1 1.4935
ASTM (A199GrT9; A335Gr.P9; A351; A213/213 M Gr.T/P91; Gr.T/P92
Heat treatment:
Stress relieved: 750 C / 2 h, oven-cooling down to 300 C and then cooled on the air.
Elongation A : > 17 %
Redrying temperature:
400 C / 1 h Impact energy Av : > 50 J (+20 C)
* approximate data
EVB 911 W
Description and application:
Cr and Mo-alloyed basic electrode for welding creep resistant heat treated 9-12% chromium steels, especially for
steels T 911 and T 92, for working temperatures up to 600 C. Preheat and interpass temperatures 200-300 C.
Base materials:
DIN: W.Nr.:
Heat and H2 resistant
boiler, tube and pipe steels: X 11 CrMoWVNb 911 1.4905
Cast: G-X12CrMoWVNbN10 11 1.4926
Heat treatment:
Stress relieved: 750 C / 2 h, oven-cooling down to 300 C and then cooled on the air.
Elongation A : > 17 %
Redrying temperature:
400 C / 1 h Impact energy Av : > 50 J (20 C)
* approximate data
EVB Mo1Cr
Description and application:
Mo and Cr-alloyed basic electrode for welding creep resistant steels and steel castings for working
temperatures up to 580 C.
Base materials:
Creep resistant steels 123
Heat treatment:
Stress relieved: 680-710 C / 1 h then cooled on the air.
Elongation A : > 19 %
Redrying temperature:
400 C / 1 h Impact energy KV : > 47 J (+20 C)
* approximate data
E Ti Mo ………….……………. F1
E Ti MoV …….……………….. F2
E Ti CrMo …….….…………… F3
E Ti 2 CrMo …………..……… F4
E Ti 5 CrMo ………………….. F5
F
Classification:
EN 499: E 46 A Mo R 12
AWS A-5.4: E 8013-G
EN ISO 3580-A: E A Mo R 12
EN ISO 3580-B: E 55 13 1M3 A
EN ISO 2560-A: E 46 A Mo R 12
EN ISO 2560-B: E 55 13-1M3 A
ETiMo
Description and application:
Mo alloyed rutile electrode for welding creep resistant steels. Suitable for welding root beads; basic type of electrode
recommended for filled welding, suitable for working temperatures up to 500 C.
Base materials:
DIN: W.Nr.:
Unalloyed steels: St 37 to St 52 1.0037 to 1.0570
Boiler plates: H I, H II, H III 1.0345, 1.0425, 1.0435
17 Mn4, 19 Mn5, 15 Mo3 1.0481, 1.0482, 1.5415
Pipe steels: St 35.8, St 45.8 1.0305, 1.0405
15 Mo3 1.5415
* approximate data
E TiMoV
Description and application:
Cr, Mo and V-alloyed rutile electrode for welding similarly alloyed steels and steel castings for working
temperatures up to 550 C. Suitable for welding root beads; basic type of electrode recommended for filled weld.
Base materials:
DIN: W.Nr.:
Boiler plates and tubes: 14 MoV63, 21 MoV53, 1.7715, 1.5404,
17 MoV84, 24 CrMoV 55 1.5406, 1.7733
10CrSiMoV7 1.8075
Heat treatment:
Stress relieved: 700 C / 2 h and then cooled on the air.
* approximate data
E TiCrMo
Description and application:
Cr and Mo-alloyed rutile electrode for welding creep resistant Cr-Mo alloyed steels and steel castings for working
temperatures up to 550 C. Suitable for welding root beads, basic type of electrode recommended for filled weld.
Base materials:
DIN: W.Nr.:
Boiler plates and tubes: 13CrMo44 1.7335
15CrMo3
13CrMoV42
(HIV)
Heat treatment:
Stress relieved: 680 C / 2 h, oven-cooling down to 300 C and then cooled on the air.
* approximate data
E Ti 2CrMo
Description and application:
Cr and Mo-alloyed rutile electrode for welding creep resistant Cr-Mo alloyed steels and steel castings for working
temperatures up to 600 C. Suitable for welding root beads; basic type of electrode recommended for filled weld.
Base materials:
DIN: W.Nr.:
Heat resistant steels: 10CrMo9.10 1.7380
15CrSiMoV7
12CrSiMo8
Heat treatment:
Stress relieved: 690 C / 2 h, oven-cooling down to 400 C and then cooled on the air.
* approximate data
E Ti 5CrMo
Description and application:
Cr and Mo-alloyed rutile electrode for welding creep resistant steels and steel castings for working
temperatures up to 600 C and for steels, resistant to hydrogen pressure. Suitable for welding root beads in oil
plant; basic type of electrode recommended for filled weld.
Base materials:
DIN: W.Nr.:
Heat and H2 resistant steels: 12CrMo9.15 1.7380
Heat treatment:
Stress relieved: 730 C / 2 h and then cooled on the air.
* approximate data