Professional Documents
Culture Documents
Kazıklar PDF
Kazıklar PDF
Kazıklar PDF
2015
Kule Vinç Temel Hesabı Sayfa No : KAPAK
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : Tarih : 10.03.2015
Kule Vinç Temel Hesabı Sayfa No : İÇERİK
İÇİNDEKİLER SAYFA
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : Tarih : 10.03.2015
Kule Vinç Temel Hesabı Sayfa No : 1
Kule vinç temeli yapay dolgu ve alüvyon katmanlarının oluşturduğu birim üzerinde tasarlandığı için, alt katmanda GABRO Sağlam
kayay soketlenmiş derin temel ile taşınacaktır.
Sağlam kayaya soketlenen kazıkların üç deplasmanı çok sınırlı olacağı için daha sığ diğer katmanların sürtünme direncinin ihmal
edilebileceği sonucuna varılmıştır.
fs / Pa = b x (qu-karot/Pa) 0.5
Pa = 100 kPa ve b = 0.63 --- > fs / 100 = 0.63 x [ 40.00 / 100 ] 0.5
fs = 1.250 kPa
B) Wyllie (1992)
fs = 0.25 x (qu-karot)0.5
fs = 0.25 x (40) 0.5 ~ 1.58 kPa
Çatlaklı Kayada %40 mertebesinde azaltımıştır.
fs = 0.949 kPa
Baguelin ( 1978) emniyetli soket birim sürtünme direnci, (fs-em) için güvenlik sayısı G.S. = 2.0 olarak alınması önerilir.
fs-em = fs / G.S.
fs-em = 0.47 kPa ~ 0.5 kPa
Poulos & Davis (1980), sürtünme dayanımı %30 azaltılması uygun olacağı ifade edilmiştir.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : Tarih : 10.03.2015
Kule Vinç Temel Hesabı Sayfa No : 2
Pells & Turner ( 1979) tarafından geliştirilen ve Canadian Foundation Engineering Manual (1992)`de önerilen Soket Kazığı
Oturma Hesabı
Ec/Er = 0.63
Ls/r = 3.33
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : Tarih : 10.03.2015
Kule Vinç Temel Hesabı Sayfa No : 3
Kohezyonlu Zeminlerde ;
Kv = Kv1 / b
Kv : b genişliğinde kare bir temelde kullanılacak yatak katsayısı
Kv1: 30cm*30cm boyutunda plaka kullanılarak, plaka yükleme deneyinden elde edilen yatak katsayısı değeri
Temel genişliği b, boyu mb olan dikdörtgen bir temelin yatak katsayısı değeri: Kv = Kv1*(m+0.5) / 1.5mb
Kohezyonsuz Zeminler ;
Kv = Kv1 (b+1)² / 4b²
Plaka yükleme deneyi yapılmadığı durumlarda ince taneli ve iri taneli zeminler için yaklaşık
Önemli Not : Düşey yatak katsayısı 36 m. derindeki ( 3.5 m. soketleme boyu) kazık ucunda kullanıacaktır.
R= 6.4 m
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : Tarih : 10.03.2015
Kule Vinç Temel Hesabı Sayfa No : 4
Kv = Kv1 / b
Kv = 21587 t/m³ ( Kohezyonlu Zemin)
S= 1.1304 m²
Kv = 24402.4 t/m
Kohezyonlu Zeminlerde ;
Aşırı konsolide killerde yanal yatak katsayısı derinlikten bağımsız olarak sabit bir değere sahip olup, bu değer yaklaşık olarak
aşağıda verilen bağıntıdan yararlanılarak bulunabilir:
Kh = 67 cu / B
Kohezyonsuz Zeminler ;
Kumlarda yanal yatak katsayısı derinlikle doğrusal bir artış gösterir. Bu zeminlerde Kh değeri aşağıdaki bağıntıdan
hesaplanmaktadır:
Kh = nh* (z / B)
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : Tarih : 10.03.2015
Kule Vinç Temel Hesabı Sayfa No : 5
kohezyonsuz
kohezyonlu
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : Tarih : 10.03.2015
Kule Vinç Temel Hesabı Sayfa No : 6
7 ) Yük Analizi
Yük Analizi Pointain MDT178 için yapılacaktır.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : Tarih : 10.03.2015
Kule Vinç Temel Hesabı Sayfa No : 7
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : Tarih : 10.03.2015
Kule Vinç Temel Hesabı Sayfa No : 8
Maksimum moment ölü yük ve rüzgardan dolayı oluşan moementlere bağlı olarak hesaplanmaktadır.
Eğer MV < 2x Mr maksumum moment olarak Mr alınır. Eğer Mv>2xMr ise maksimum moment Mv-Mr alınır.
Maksimum kesme kuvvetin sabitleme açısı ET/2 dir.
Vinç hizmet dışı olduğu zaman Cmax sıfırdır.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : Tarih : 10.03.2015
Kule Vinç Temel Hesabı Sayfa No : 9
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : Tarih : 10.03.2015
Kule Vinç Temel Hesabı Sayfa No : 10
A) Servis Durumunda
C ) Montaj Durumunda
Bu duruma ait mesnet tesirleri herhangi bir tabloda yoktur. Çok yüksek vinçlere ait değerin açıklaması
olmadığı için Tekno Vinç firması ile bağlantıya geçirilmiş ve yine her bir ayağa gelecek maks. Normal
kuvvetin 165 t olacağı aktarılmıştır.
F3 : 165 t
Bu kuvvetlerin hiçbirinde makine hareketinden doğacak dinamik tesirler yoktur. Dinamik tesirler için %10 yük
ilavesi yapılacaktır.
Önemli Not : Bileşik eğilme hesabında maksimum N ( Normal Kuvvet ) ve M (Moment) değerlerine karşılık gelen
diğer yük değeri N ve M alınacaktır. Zarf kombinasyon değerleri alınmayacaktır.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : Tarih : 10.03.2015
Kule Vinç Temel Hesabı Sayfa No : 11
Sonuç : Tüm kazıklar basınç gerilmesi altında çalışmaktadır ve maksimum kesit tesiri ;
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : Tarih : 10.03.2015
Kule Vinç Temel Hesabı Sayfa No : 12
Önemli Not : Bileşik eğilme hesabında maksimum N ( Normal Kuvvet ) ve M (Moment) değerlerine karşılık gelen
diğer yük değeri N ve M alınacaktır. Zarf kombinasyon değerleri alınmayacaktır.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : Tarih : 10.03.2015
Kule Vinç Temel Hesabı Sayfa No : 13
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : Tarih : 10.03.2015
Kule Vinç Temel Hesabı Sayfa No : 14
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : Tarih : 10.03.2015
Kule Vinç Temel Hesabı Sayfa No : 15
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : Tarih : 10.03.2015
Kule Vinç Temel Hesabı Sayfa No : 16
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : Tarih : 10.03.2015
Kule Vinç Temel Hesabı Sayfa No : 17
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : Tarih : 10.03.2015
Kule Vinç Temel Hesabı Sayfa No : 18
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : DATE : 10.03.2015
Kule Vinç Temel Hesabı PN : 19
2
K = (b w.d )/Md Akma Eğriliği
2
As = 61.2 mm Donatı Alanı
2
Asmin = 2700 mm Minimum Donatı Alanı (%02)
Kullanılan Donatı
Çap Ø Alan (mm²) Aralık (mm) AdetToplam Alan (mm²)
26 530.66 200 6 3183.96
2700<3183,96 OK
Açıklama :
Kmin; Denge altı donatının akma sınırına ulaştığında eksitteki deformasyon eğriliğidir.
Asmin değeri; TS500 tek doğrultuda çalışan döşemeler için verilen tanımdan alınmıştır.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : DATE : 10.03.2015
Kule Vinç Temel Hesabı PN : 20
2
K = (b w.d )/Md Akma Eğriliği
2
As = 82.5 mm Donatı Alanı
2
Asmin = 2700 mm Minimum Donatı Alanı (%02)
Kullanılan Donatı
Çap Ø Alan (mm²) Aralık (mm) AdetToplam Alan (mm²)
26 530.66 200 6 3183.96
0
2700<3183,96 OK
Açıklama :
Kmin; Denge altı donatının akma sınırına ulaştığında eksitteki deformasyon eğriliğidir.
Asmin değeri; TS500 tek doğrultuda çalışan döşemeler için verilen tanımdan alınmıştır.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : DATE : 10.03.2015
Kule Vinç Temel Hesabı PN : 21
2
K = (b w.d )/Md Akma Eğriliği
Kullanılan Donatı
Çap Ø Alan (mm²) Aralık (mm) AdetToplam Alan (mm²)
26 530.66 200 6 3183.96
2700<3183,96 OK
Açıklama :
Kmin; Denge altı donatının akma sınırına ulaştığında eksitteki deformasyon eğriliğidir.
Asmin değeri; TS500 tek doğrultuda çalışan döşemeler için verilen tanımdan alınmıştır.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : DATE : 10.03.2015
Kule Vinç Temel Hesabı PN : 22
2
K = (b w.d )/Md Akma Eğriliği
2
As = 53.0 mm Donatı Alanı
2
Asmin = 2700 mm Minimum Donatı Alanı (%02)
Kullanılan Donatı
Çap Ø Alan (mm²) Aralık (mm) Adet Toplam Alan (mm²)
26 530.66 200 6 3183.96
2700<3183,96 OK
Açıklama :
Kmin; Denge altı donatının akma sınırına ulaştığında eksitteki deformasyon eğriliğidir.
Asmin değeri; TS500 tek doğrultuda çalışan döşemeler için verilen tanımdan alınmıştır.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Proje : DATE : 10.03.2015
Kule Vinç Temel Hesabı PN : 23
Kesme Hesabı
2
fctd = 1.15 Mpa=N/mm
2
fcd = 17 Mpa=N/mm
Vcr= 1E+06 N
2
fyd = 365 Mpa=N/mm
Zımbalama Tahkiki
b1,2 : h + d h: 0.37 m
b1,2 : 1.72 m d: 1.35 m
Ap : 2.96 m² ( Zımbalama Alanı )
Up = 2(b1+b2) : 6.88 m ( Zımbalama Çevresi )
V pn N d A p . zo Nd : 314.5 t
Vpr > Nd
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)