The document provides step-by-step instructions for tuning a BSNL dish. It involves connecting a modem to a laptop, configuring the laptop's network settings, and using an IP star software to enter dish and hardware details. Key steps include aligning the antenna to achieve an Es/No value of 8.0 and adjusting polarization for equal left and right 3dp values. Upon completing an IUAT quality control signal process successfully, the installation is complete.
The document provides step-by-step instructions for tuning a BSNL dish. It involves connecting a modem to a laptop, configuring the laptop's network settings, and using an IP star software to enter dish and hardware details. Key steps include aligning the antenna to achieve an Es/No value of 8.0 and adjusting polarization for equal left and right 3dp values. Upon completing an IUAT quality control signal process successfully, the installation is complete.
The document provides step-by-step instructions for tuning a BSNL dish. It involves connecting a modem to a laptop, configuring the laptop's network settings, and using an IP star software to enter dish and hardware details. Key steps include aligning the antenna to achieve an Es/No value of 8.0 and adjusting polarization for equal left and right 3dp values. Upon completing an IUAT quality control signal process successfully, the installation is complete.
2) DISABLE WIRELESS CONNECTION 3) CLIC ON LOCAL AREA CONNECTION 4) CLICK ON PROPERTIES 5) SELECT USE FOLLOWING IP ADDRESS a) IP ADDRESS- 10.253.40.242 b) SUBNET MASKED -255.255.255.248 c) DEFAULT GATE WAY – 10.253.40.241. 6) CLICK ON OK 7) THEN CLICK ON CLOSE XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
1) CLICK ON IP STAR BLUE ICON WHICH IS ON LAPTOP DESKTOP
2) ADD FOLLOWING DETAILS a) INSTALLATION ID – 1000001 b) PASSWORD- STI32TY c) JOB ID – 020007A0 d) Authorization code – WCSN9 B4G1B ELPTW 6IE3I 3) CLICK ON NEXT ICON 4) ADD FOLLOWING DETAILS a) DISH LENGTH – 1.2m b) BUC VALUE – 2 c) BUC S/N – A46772A d) LNB S/N – 10F101177 e) CABLE LENGTH – 25m f) CABLE MFG. – ASD g) DESELECT DEFAULT h) FREQUENCY – 9.65 5) CLICK ON NEXT ICON 6) THEN ENTER IP ADDRESS 10.253.40.241 7) THEN LET COMPUTER DO HIS JOB TILL HE ASK FOR ALIGN THE ANTENA 8) ALIGN ANTENA TILL U GET TOLL Es/No VALUE 8.0 9) THEN CLICK ON NEXT 10) LET THE COMPUTER COMPLETE HIS TASK TILL HE ASK FOR POLORAISATION ADJUST 11) ADJUST POLORAISATION BY ADJUSTING BUC LEFT AND RIGHT AND GET BOTH 3dp left and 3dp right VALUE EQUAL 12) THEN CLICK ON NEXT 13) THEN COMPUTER ASK FOR ‘do u want to send quality control signal’ click on ok 14) AFTER COMPUTER SENDING SIGNAL TO BASE IT WILL SHOW “IUAT PROCESS IS SUCCESSFUL” CONGRATULATION YOU ARE DONE REMOVE LAN CABLE FRTOM LAPTOP AND CONNECT TO SWITCH RESTART MODEM AND ATA BOX NOW PHONES ARE WORKING