Professional Documents
Culture Documents
Control of Documented Information Procedure Sample
Control of Documented Information Procedure Sample
Control of Documented Information Procedure Sample
Twist Drills
Non-flatted body, 60° angle General Steels/Brass
Tolerance information can be found in the Technical Section, Page 286 Universal Steels
Cast Iron
60 o
d1
d2
l1
Series 581 613 381 590 736 582 583 614 584
Standard DIN 333 DIN 333 DIN 333 GUH STD GUH STD DIN 333 DIN 333 DIN 333 DIN 333
Substrate HSS HSS Cobalt HSS Carbide HSS HSS HSS HSS
Cut Direction RH RH RH RH RH LH RH RH LH
Form A A A A A A R R R
Feature Reinforced neck
* one-sided Surface Finish
Order Code d1 d2 l1
0.500* 0.50 3.15 25.0 • • • • •
0.800* 0.80 3.15 25.0 • • • • • • •
1.000 1.00 3.15 31.5 • • • • • • • • •
1.250 1.25 3.15 31.5 • • • • • • • • •
1.600 1.60 4.00 35.5 • • • • • • • • •
2.000 2.00 5.00 40.0 • • • • • • • • •
2.500 2.50 6.30 45.0 • • • • • • • • •
3.150 3.15 8.00 50.0 • • • • • • • • •
4.000 4.00 10.00 56.0 • • • • • • • • •
5.000 5.00 12.50 63.0 • • • • • • • •
6.300 6.30 16.00 71.0 • • • • • • •
8.000 8.00 20.00 80.0 • • • • •
10.000 10.00 25.00 100.0 • • •
12.500 12.50 31.50 125.0 • •
bright TiN
To order: Series number + mm, ex. 5518 3.000 77
Metric Center Drill/Countersink
Twist Drills
Tolerance information can be found in the Technical Section, Page 286 Universal Steels
120o
Cast Iron
d1
60 o
d2
l1
1.6 mm dia up to DIN 1412, 1.6 mm dia up to DIN 1412, > 1.6 mm dia to
Web thin to DIN 1412, form A
form A form A DIN 1412, form A
Technical Specifications - Form B Center Drills Technical Specifications - Form R Center Drills
Standard DIN 333 GUH STD ASA (USA Std.) Standard DIN 333 GUH STD
Point grind relived cone relived cone relived cone Point grind relived cone relived cone
Point angle 118 118 118 Point angle 118 118
Special purpose drill for producing center holes to DIN 332, sheet 1, form B (with Special purpose drill for producing center holes to DIN 332, sheet 1,
Description Description
protecting countersink of 120 deg.) form R (radiused)
Radius form for high fracture resistance properties, precise concentricity of the point in
Series 591 has a reinforced neck for higher metal removal rates.
relationship with the body and a protected center hole.
Twist Drills
Non-flatted body, 60° angle General Steels/Brass
Tolerance information can be found in the Technical Section, Page 286 Universal Steels
Cast Iron
60 o
d1
d2
l1
1.6 mm dia up to DIN 1412, 1.6 mm dia up to DIN 1412, > 1.6 mm dia to
Web thin to DIN 1412, form A
form A form A DIN 1412, form A
Technical Specifications - Form B Center Drills Technical Specifications - Form R Center Drills
Standard DIN 333 GUH STD ASA (USA Std.) Standard DIN 333 GUH STD
Point grind relived cone relived cone relived cone Point grind relived cone relived cone
Point angle 118 118 118 Point angle 118 118
Special purpose drill for producing center holes to DIN 332, sheet 1, form B (with Special purpose drill for producing center holes to DIN 332, sheet 1,
Description Description
protecting countersink of 120 deg.) form R (radiused)
Radius form for high fracture resistance properties, precise concentricity of the point in
Series 591 has a reinforced neck for higher metal removal rates.
relationship with the body and a protected center hole.
Tolerance information can be found in the Technical Section, Page 286 Universal Steels
Cast Iron
60 o
d1
d2
~15 o
S-0,1
l1