Professional Documents
Culture Documents
Electronic Layout Tremulus Lune: 2.1 2.1 See "Legend" Diagram For Explanation of Symbols On Board
Electronic Layout Tremulus Lune: 2.1 2.1 See "Legend" Diagram For Explanation of Symbols On Board
com
depth 1 speed 2
2.1 stomp-OUT spacing 2
2.1
See "legend" 330
spacing 3
fine 2
2k7
diagram for V+
1uF
1M
103
220k smooth 3
explanation 220k
220k
470k
depth 2 smooth 1
of symbols
100k
100k
CdS
+ TL072 4558
on board. -
1k
10uF 10uF
1k
47k 1M smooth 2
1k
1k
47k LED +
1uF
depth 3
stomp-IN stomp-LED
note: connect speed 3 ground
to fine 3
100k trimpot
fine is 10k (2 wires) To set the trim pot (after circuit is working) turn
depth is 1k (3 wires) the trim pot all the way down,then slowly bring the
speed is 100k (2 wires) trim-pot up as you play an instrument, until the
smooth is 500k (3 wires) average volume is the same when on and bypassed
spacing is 500k (2 wires) use these
two leads only
On/Off switch
(3PDT stomp)
"Black wire of battery snap" to stomp-OUT
(Battery power only) on board
to stomp-LED
on board
Speed Fine