Professional Documents
Culture Documents
C - C (CR) Series New Catalogue
C - C (CR) Series New Catalogue
C/C(CR)
Motor Protector Cable Entry This model can be identified by the Primary Operation Secondary Operation
suffix “A”. Refer to model selection for
Each pump up to 7.5kW as standard has a built in auto-cut, Every cabtyre cable has an anti-wicking availability and model numbers.
self-resetting Circle Thermal Protector (CTP). Integrated in block at the cable entry section of the 5 4 5
the motor housing, the CTP directly cuts the motor circuit if pump. This mechanism is such that a 4 3
3
excessive heat builds up or an overcurrent caused by an part of each conductor is stripped back A 1 W 2 A 1 W 2
electrical or mechanical failure occurs. and the part is sealed by molded
rubber or epoxy potting which has
A Miniature Thermal Protector (MTP) is embedded in each flowed in between each strand of 1 Float 3 operates, and pump W starts 1 Start float 4 of pump A operates to
winding of the motor. These MTPs are connected in the conductor. This unique feature to discharge water. start water discharge.
series, and their wires are led out of the motor. Should prevents wicking along the strands
the winding temperature rise to the actuating of the conductor itself.
temperature, the bimetal strip opens to cause the
control panel to shut the power supply. 5 5
4 4
3 3
Motor A 1 W 2 A 1 W 2
1 2
C-series Discharge Bore
50 • 80 • 100mm Discharge Bore
100mm
Performance Curves Performance Curves
30 30
15 15 10 100
0C C4
41 15
5
10 10 20 20
0C 0C
Total Head (m)
10
42 10 41 0C 1
1
0C
0C
80
.2 47
80
47
50C
42
.5
50C
C2
C2
10 .5 10
.2
1.5
0C 0C
1.5
2.75
2.75
10 45 10 45
.5 .5
5 5
( S)
( S)
0 0 0 0
0 0.5 1.0 1.5 2.0 0 0.5 1.0 1.5 2.0 0 1.0 2.0 3.0 0 1.0 2.0 3.0
Capacity (m3/min) Capacity (m3/min) Capacity (m3/min) Capacity (m3/min)
50 50C2.75S TOS50C2.75S 50CA2.75S TOS50CA2.75S 0.75 Single 3000/3600 Capacitor 31 x 27/ 5 a(b*2) 405 x 523 621 x 566 405 x 580 621 x 624 32 30 34 32
start 28 x 27
50 50C2.75 TOS50C2.75 50CA2.75 TOS50CA2.75 50CW2.75 TOS50CW2.75 0.75 Three 3000/3600 D.O.L. 28 xx 27/
31
27 6 A 405 x 415 621 x 458 433 x 496 649 x 539 24 23 25 24
H
H
E 1 4 x 3.5 13.9 4 x 3.5 14.1
L 3 3 x 3.5 12.9 Chloroprene
2 x 1.25 9.8 Rubber
4 x 5.5 16.8
M 3 3 x 5.5 15.2
2 x 1.25 9.8
L L
3 4
C-series Discharge Bore
150 • 200mm C(CR)-series Discharge Bore
80 • 100mm
Performance Curves Performance Curves
34 34 40 40
30 30 80
C2
7.5
30 -C 30
80
20 R
0C
C
80
27
20 43
0C C2
.5
7
Total Head (m)
-C
20 20 3. 80
80
7 7-
R
C2 80
C
CR
25
20 5. 20 C2
5-
.5
80 CR 3.
-C
150 C2 80 7-
150 CR
R
C6 C6 2.2 C2
15 15 -C 2.
150 150 R 2-
10 10 CR
C6 C6
11 11 10 10
0 0 0 0
0 2 4 6 8 0 2 4 6 8 0 0.5 1.0 1.5 0 0.5 1.0 1.5
Capacity (m3/min) Capacity (m3/min) Capacity (m3/min) Capacity (m3/min)
75 75
Model Selection 50/60Hz
70 70
Discharge Motor Speed Starting Solids Cable Cable Dimensions L x H Dry Weight*2
Model
Bore Output Phase (S.S.) Method Passage Length Code mm kg
60 10 60 10
0C 0C
Free Guide Rail Free Guide Rail Free Guide Rail 22 22
mm kW min -1
mm m 2-C 2-C
Standing Fitting Standing Fitting Standing Fitting R 80
4 x 5.5 16.8 20 x 31
M 3 3 x 5.5 15.2
80 80C23.7-CR TOS80C23.7-CR 3.7 Three 3000/3600 D.O.L. 22 x 31.3/ 10 C(E*2) 519 x 613 693 x 640 80 71
2 x 1.25 9.8 22 x 31
4 x 14 21.7 Chloroprene 80 80C25.5-CR TOS80C25.5-CR 5.5 Three 3000/3600 D.O.L.*1 29 x 23.2/
29 x 23 10 H 615 x 879 788 x 877 136.5 123
N 3 3 x 14 19.7 Rubber
4 x 1.25 9.6 PVC 80 80C27.5-CR TOS80C27.5-CR 7.5 Three 3000/3600 D.O.L.*1 26 x 25.5/
29 x 23 10 I 615 x 879 788 x 877 141.5 128
P 1 7 x 3.5 21.3 L L
2x2 80 80C211-CR TOS80C211-CR 11 Three 3000/3600 Star-Delta 26 x 26.7/
26 x 25.5 10 L 615 x 927 788 x 925 156.5 143
7 x 5.5 Chloroprene
Q 1 24.4
2x2 Rubber 80 80C215-CR TOS80C215-CR 15 Three 3000/3600 Star-Delta 26 x 25.5 10 L(M*2) 730 x 1086 937 x 1086 260 235
R 1 7x8 25.6
2x2 100 100C222-CR TOS100C222-CR 22 Three 3000/3600 Star-Delta 26 x 30 10 N 837 x 1184 1025 x 1184 420 380
4 x 22 28.8 Chloroprene *1 Star-Delta available upon request *2 200-240V
S 3 3 x 22 26.1 Rubber *3 All weights excluding cable
4 x 1.25 9.6 PVC Weights of guide rail fitting excluding duckfoot bend
5 6
SPECIAL ACCESSORIES
FLOAT SWITCHES
Tsurumi offers two types of float switches (liquid level sensors). A micro-switch is incorporated in both types.
Model MC-2 is a heavy-duty Model RF-5 is an economy
type float switch with a shock type float which can detect
absorber. Having equipped upper/lower limit water levels
with a high grade micro switch, with single float. The snap
the MC-2 assures trouble-free on-off action ensures stable
operation in the liquid con- operation in clean or waste
taining much suspended solids water containing suspended
and floating scum. Either of the solids or oil and fat.
two contacts, normally-open or
normally-close, can be selected
as required.
TSURUMI OPTIONS
SPECIAL VERSION WITH GALVANIC CORROSION PROTECTION
In seawater, a material’s resistance to corrosion can be seen clearly. When metals with different potentials are brought into
contact in seawater, only the metal of lower potential corrodes. As the difference in potential increases, the metal of lower
potential corrodes faster. As an option, Tsurumi can supply pumps with parts made of higher electric potential metal as the
sacrificial anode.
Two high-temperature operating models are available - the Rank 60 for operation in liquids up to 60°C and the Rank 90 for
operation in liquids up to 90°C. Consult your dealer for more details. (These special versions are not available for some pump
models.)
We reserve the right to change the specifications and designs for improvement without prior notice.
Your Dealer
www.tsurumi-global.com