Professional Documents
Culture Documents
PDF Concreto 2 PDF
PDF Concreto 2 PDF
PDF Concreto 2 PDF
Volume 10, Issue 03, March 2019, pp. 622–628, Article ID: IJCIET_10_03_062
Available online at http://www.iaeme.com/ijmet/issues.asp?JType=IJCIET&VType=10&IType=3
ISSN Print: 0976-6308 and ISSN Online: 0976-6316
Kaaviya S
Final Year B.E. Students, Department of Civil Engineering, PSVPEC,
Chennai, Tamil Nadu, India
Kavitha Karthikeyan S
Assistant Professors, Department of Civil Engineering, PSVPEC,
Chennai, Tamil Nadu, India
Indhumathi S
Assistant Professors, Department of Civil Engineering, PSVPEC,
Chennai, Tamil Nadu, India
ABSTRACT
Over the last twenty-five years, the demand for electricity has skyrocketed
dramatically, and the country is facing a terrible power reliability situation. The
illumination of highways and roads is the biggest challenges faced by the government.
Secondly, almost one-fifth of India’s rural households still remain in acute darkness.
There is a huge gap between the electricity demand and the electricity being produced
in the country. The current advancement in technology has been providing various
solutions for the existing problem. On that context, cement being an omnipresent
material, can be made photo luminescent. Photo luminescence is the light emission
from any form of matter, initiated by photo excitation. This project presents an
investigation on the introduction of photo luminescent property in concrete. The
proposed concept is to induce light emitting pigments in glass so as to produce glow
in the dark concrete. Photo luminescent pigments incorporated in the concrete, consist
of rare alkaline earth elements from the lanthanide series and hence are proven to be
inert, ensuring minimal harm to the environment. The resulting concrete material is
found to have considerable compressive strength and possess light emitting
properties. Implementing photo luminescence induced concrete has a high potential to
make a valuable contribution to sustainable development in the future.
Key words: photo luminescence, strontium aluminate, light emission, borosilicate
glass.
1. INTRODUCTION
Cement played a vital role in the construction field, ever since the ancient time. Birth of many
new construction materials after the industrial revolution, dominated the world with its
advancements and efficiency. The cement created by Joseph Aspdin, still serves as a key
element in the creation of various types of special cements to meet the criteria required.
Energy resources are gradually decreasing as the demand keeps increasing. The government
faces a major problem in illuminating streets and highways. Frequent blackouts cause
difficulty among travelers to recognize the path and pose a great threat to their sense of safety
and security. Being an abundantly available material in the world, cement can be induced with
certain types of photo luminescent pigments, to absorb light and emit it in the absence of the
light source.
Photo luminescence is generally said to be defined as the emission of light, caused when
light is absorbed in the form of photons and causes the electrons to jump from their energy
levels. Various sources of light energy can be used to charge up the photo luminescent
material. Sunlight, a naturally available light energy source, can be used to obtain brighter
glow in the photo luminescent material. This solution is similar to other conventional energy
sources as it primarily depends on a natural energy source. Though the initial cost is high, it
will prove to be cost effective in terms of operational and maintenance cost.
This journal presents a framework which suggests the method of introducing photo
luminescence induced concrete by the introduction of light emitting glow in the dark
pigments. It ensures safety in streets that lacks proper lights, thereby creating a well-lighted
environment and might decrease the rate of accidents due to improper lighting facilities. For
the current world that deals with a lot of pollution and environmental degradation, this
solution will turn out to be eco-friendly and only has a less impact on the human health &
environment, as the key components are non-radioactive rare earth elements.
2. REVIEW OF LITERATURES
T. Subramani et al published a journal on Transparent Concrete created by the use of optical
fibres. Transparent concrete is a concrete based building material with light-transmitting
properties due to embedded light optical elements usually optical fibers. The mix design of
M40 concrete was adopted wherein optical fibers were reinforced in to the concrete by 5%
and 10% based on surface area. Different tests like Compressive strength test, split tensile
strength, Flexural strength test were carried on the specimen. The results evidently show that
as the percentage of optical fiber increases the strength also increases.
Inference: Use of coarse aggregate hinders the light transmitting ability of the transparent
concrete.
News article in CNN Style (July, 2016) Mexican scientist José Carlos Rubio Avalos has
invented a glow-in-the-dark cement that acts as an energy-efficient material soaks up sunlight
during the daytime and begins to emit light as the sun sets. He added photoactive materials to
the cement to absorb and emit light, but the greatest challenge was to make the cement, an
opaque material, soak up UV rays. To do this, he had to alter its microstructure.
Inference: Glow obtained from the crystallization process of cement yields shorter
wavelengths in the visible spectra.
3. STUDY OF MATERIALS
The materials used in this project are cement, fine aggregate, borosilicate glass induced with
photo luminescent pigment, glass fiber and water.
4. CALCULATION OF MATERIALS
Ratio of cement and fine aggregate = 1:3
Exposure condition = Moderate
Water-cement ratio = 0.5
30 seconds 10 minutes
10 minutes 25 minutes
1 hour 70 minutes
Evaluation of the afterglow yielded that the glow is affected by moisture content present
in the cube. It serves as a hindrance to the duration of afterglow. The evaluation also yielded
that the glow is brighter for a duration of 2 minutes in the beginning of afterglow, and the
brightness decreases in a fixed percentage. Due to factors such as percentage of pigment
induced, humidity in the environment etc., the afterglow did not exceed for a duration more
than 2 hours, even after charging for more than an hour.
7. TEST RESULTS
Cubes are tested at 7th day, 14th day and 28th day. The average compressive strength of the
cubes is as follows:
Average compressive strength obtained at 7th day testing = 19.1666 N/mm2
Average compressive strength obtained at 14th day testing = 25.033 N/mm2
Average compressive strength obtained at 28th day testing = 30.466 N/mm2
A graphical representation between the strength obtained in 7th, 14th and 28th day is as
follows:
8. CONCLUSIONS
A novel self sustainable material was developed by the introduction of photo luminescent
properties in concrete. Concrete being an opaque material, light emitting properties were to be
integrated in glass so as to create a glow in the dark surface. In this investigation, the photo
luminescent pigments used were about 10% of weight of cement. The findings we have
presented suggest that the percentage of pigment can be increased to up to 50% in order to
amplify the glow produced. The project has helped us to learn about the effect of photo
luminescent properties on the strength of the concrete.
There were several constraints we had faced during the course of the project. Firstly, the
photo luminescent pigment was not locally available, and we had to outsource the material
from abroad. The instrument required to measure the light emissivity of the concrete was
unavailable in Tamil Nadu, and we had to change our initial approach from creating a photo
luminescent concrete block to the introduction of photo luminescent only to the top surface.
The cost of the pigment was another major issue, and we had to limit the percentage of
pigment to 10%.
The implementation of photo luminescence induced concrete at a large scale would prove
to be an ideal alternative for the illumination of roads and to light up the rural households of
the country. It would be fruitful to pursue further research on this concept in order to help the
construction industry to provide effective solutions to this existing problem of lack of energy
resources.
REFERENCES
[1] International Journal of Emerging Trends & Technology in Computer Science (IJETTCS),
Volume 7, Issue 2, March - April 2018 ,Transparent Concrete Concept By Replacing Fine
Aggregate Of Waste Glass By Using Admixture In Optical Fibre
[2] “Glow-in-the dark cement could revolutionize how we light cities” - José Carlos Rubio
Avalos (2016)
[6] www.google.com
[7] en.wikipedia.org
[8] www.sciencedirect.com
[9] www.researchgate.net
[10] theconstructor.org