Professional Documents
Culture Documents
Asem Moto Ble & MB: Distribution Amplifiers 1002 MHZ
Asem Moto Ble & MB: Distribution Amplifiers 1002 MHZ
Asem Moto Ble & MB: Distribution Amplifiers 1002 MHZ
Features
Drop-in 1G replacement RF modules for Patented DSIM technology (Digital AGC)
Motorola® Starline® MB Mini-Bridger and
Pad adjustable forward and return EQ’s
BLE Line Extender
Increased reliability with higher surge
5 to 42, 85 or 204 MHz reverse path
protection in the GaN hybrids
Ideal for traditional HFC networks for
Up to 3 dB higher output levels with same
increased performance & reliability
distortion performance with GaN Hybrids
Ideal for fiber deep networks with the
Lower power consumption then OEM
extended reach of the amplifiers
amplifiers
Page 1 of 8 www.acicomms.com
BLOCK DIAGRAMS
ASEM-BLE
ASEM-MB
ASEM MB (Type 2A-TRI & 2M-TRI) 1002 MHz GaN Amplifier Block Diagram
Thermal Mid/High
H EQ Pad 1 Pad Control Circuit 2 Pad 3 H AC/
AC/ Net Board
P1 RF L RF P2
L
Forward Input Low End Forward Output
Reverse Output Peaking
Pad Reverse Input
-20 dB
Power Power
Test Point
Director Director
Fuse -20 dB Fuse
Test Point
-20 dB
Rejection Net Test Point
Pad EQ Filter BSW
Board
Optional Optional
-20 dB
Test Point -20 dB Forward Gain
Reverse Gain
Test Point 42 dB with DSIM-GI
20 dB
46 dB With AGC Bypass
Pad
HPF BODE
Control
Power Power
Circuit
Director Director
Fuse Fuse
DSIM-GI
AC/ L Plug-in AC/
P3 RF Net Jumper RF P4
Board Pad 4 H Splitter
Forward Output Forward Output
Reverse Input Reverse Input
-20 dB
Test Point
Note:
1. Forward gain stated at 1002 MHz. Reverse gain stated at 40 MHz.
2 of 8 www.acicomms.com
SPECIFICATIONS (BLE - Line Extender) – 42/53 MHz Split
3 of 8 www.acicomms.com
SPECIFICATIONS (MB – Mini-Bridger) 42/53 MHz Split
4 of 8 www.acicomms.com
SPECIFICATIONS (BLE - Line Extender) – 85/105 MHz Split
5 of 8 www.acicomms.com
SPECIFICATIONS (MB – Mini-Bridger) 85/105 MHz Split
6 of 8 www.acicomms.com
Accessory Ordering Information:
The ASEM Moto ordering matrix provides the part number information to order the configured stations.
This page contains the ordering information for the required accessories that will be needed to make
the stations functional in the field or the optional accessories that can be ordered separately.
Required Accessories
Part Numbers
Description
(Where XX.X = dB value)
JXP style attenuator pads
• 1 Required for forward input
• 1 Required for reverse output JXP137B-XX (0 to 26 dB in 1.0 dB steps)
• 1 Required for forward input Equalizer
• 1 Required for reverse output Equalizer
Optional Accessories
Description Part Numbers
Digital Station Intelligence Manager -
DSIM-GI-MDL-02
Single Pilot AGC Module (Analog or Digital)
DSCT-xxx-yyy
xxx = Pilot Channel Number
Digital Station Intelligence Manager -Controller yyy = Channel Type
IRC = Analog IRC Spacing
DIG = Digital / QAM
7 of 8 www.acicomms.com
Ordering Matrix
Position 1 2 3 4 5 6 7 8 9 10
PART NUMBER
3 BANDPASS SPLIT
Amplifier Model BL MB
Max gain with DSIM-GI 34 42
Max gain w/AGC bypass 38 46
7 STATION SLOPE
9 HOUSING OPTIONS
M = RF Module Only
10 CUSTOM OPTIONS
0 = NONE
X = Determined by Product Management