Professional Documents
Culture Documents
Chromatic Dispersion Compensation Modules: Datasheet Datasheet
Chromatic Dispersion Compensation Modules: Datasheet Datasheet
Highlights
Dispersion compensation in high-speed extended-
haul DWDM networks
In-line dispersion compensation at network mid-points
Post-dispersion and pre-dispersion compensation
Powered or passive operation
Full C-Band coverage (DWDM Channels 17-60)
Low insertion loss under 3.5 dB (except DCM010)
Overview Chromatic dispersion compensation up to 200 km
The EM316DCM Dispersion Compensation Modules are part of Slope-matched SMF28/G.652 fiber
the Fiber Driver™ DWDM solution. They are one-slot modules Increased OSNR and system margins
accommodated by any Fiber Driver chassis slots. These modules
Economic solution ideal for single stage amplification
may be operated as passive units in an un-powered chassis or as
managed modules with an EM316LNXNM-OT Network Manager Cascading support
(NM) in a powered chassis system. One-slot Fiber Driver module fits into any Fiber Driver
DCM modules provide fixed chromatic dispersion compensation chassis
for high-speed metro core, regional, and extended-haul DWDM
networks. Chromatic dispersion is a major distance limiting factor
in DWDM networks for protocols exceeding 2 Gbps including 2
and 4 Gbps Fibre Channel, 2.5 and 2.7 Gbps SONET/SDH OC-48/
STM16 with or without FEC, and especially networks running 10
Gbps.
The DCMs offer a high dispersion compensation level and a very
low insertion loss penalty. They provide negative dispersion
compensation over the full C-Band with possible distance
extensions of up to 200 kilometers.
PWR
PWR
EM316LNXNM-OT
EM316LNXNM-OT
EM316EUSM-10G
EM316EUSM-10G
EM316DMR3G-3R
EM316DMR3G-3R
EM316-2XFP-ET
EM316-2XFP-ET
EM316DCM100
EM316-10G-XY
EM316-10G-XY
EM316EUSM
EM316EUSM
DWDM DWDM
BOOSTER IN-LINE PRE-AMP
MUX DMUX
100 km 100 km
1
Datasheet
Physical Specifications
Operating Temperature Range 00C to 500C (320F to 1220F)
Storage Temperature -400C to 850C (-400F to 1850F)
Relative Humidity 85% maximum, non-condensing
90 mm x 25 mm x 240 mm (within chassis)
Approximate Dimensions (H x W x D)
34 mm x 13 mm x 100 mm (extending from front panel)
Approximate Weight 400 g (14.1 oz)
RoHS Directive; China RoHS; REACH Directive; WEEE Directive;
Regulatory Compliance The Quality Management System is certified to ISO 9001 by QMI-SAI Global
The Environmental Management System is in compliance with ISO 14001
Optical Parameters 1 DCM010 DCM020 DCM030 DCM040 DCM050 DCM060 DCM080 DCM100 DCM120 DCM200
Optical Parameters 1 DCM040 DCM050 DCM060 DCM080 DCM090 DCM100 DCM120 DCM140 DCM160 DCM180
-50G -50G -50G -50G -50G -50G -50G -50G -50G -50G
Compensated Distance (km) 40 50 60 80 90 100 120 140 160 180
Dispersion First Channel (ps/nm) 2, 3 -623 -778 -934 -1246 -1401 -1557 -1868 -2180 -2491 -2802
Dispersion Last Channel (ps/nm) 2, 3 -704 -880 -1056 -1408 -1584 -1760 -2112 -2465 -2817 -3169
Dispersion Tolerance (%) 4 ≤7 ≤7 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
Operation Bandwidth
25 25 25 25 25 25 25 25 25 25
(Centered on ITU)
PMD < 0.5 < 0.5 < 0.5 < 0.7 < 0.7 < 0.7 < 1.0 < 1.0 < 1.5 < 1.5
Inter-Channel IL Uniformity (dB) ≤1 ≤1 ≤1 ≤1 ≤1 ≤1 ≤1 ≤1 ≤1 ≤1
5
Insertion Loss (dB) ≤ 3.5 ≤ 3.5 ≤ 3.5 ≤ 3.5 ≤ 3.5 ≤ 3.5 ≤ 3.5 ≤ 3.5 ≤ 3.5 ≤ 3.5
Insertion Loss Ripple (dB) ≤1 ≤1 ≤1 ≤1 ≤1 ≤1 ≤1 ≤1 ≤1 ≤1
Return Loss (dB) > 40 > 40 > 40 > 40 > 40 > 40 > 40 > 40 > 40 > 40
1 The optical characterization of the insertion loss, the insertion loss ripple, the group delay ripple, the polarization mode dispersion and the polarization dependant loss is
made within the operation bandwidth centered on the ITU channel. The specs are guaranteed over the temperature range.
2 The group delay spectrum is measured with modulation frequency of 192 MHz at every 3 pm.
3 Obtained from linear fit of the group delay spectrum performed over the operation bandwidth.
2
Datasheet
MRV operates Worldwide sales and service offices across four continents.
Contact us at info@mrv.com
MRV Communications
Corporate Headquarters
300 Apollo Drive
Chelmsford, MA 01824
http://www.mrv.com
All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the
accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information.
MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders.
MRV-FD-DCM-051412 3020002-001 Rev. A7 Copyright ©2012 MRV Communications, Inc. All Rights Reserved.