Professional Documents
Culture Documents
List of Tables: Table Title No. No
List of Tables: Table Title No. No
3.3 Comparison of critical load for the plates stiffened with four different
types of stiffeners ---------------------------------------------------------------------------- 22
3.4 Comparison of warping stress and shear stress for the plates stiffened
with four different types of stiffeners and subjected to torsion load. ----------------- 23
4.2 Input and output of the computer code for finding the thickness of
equivalent Orthotropic Plate Model for the Representative Unit Cell of
Hat Stiffened Plate -------------------------------------------------------------------------- 28
4.5 Comparison of deflections (in mm) at various locations across the width
at mid-span for Hat Stiffened Plate and Orthotropic Plate Model -------------------- 32
4.6 Comparison of maximum in-plane stress and maximum von Mises stress
obtained for the Representative Unit Cell of Hat Stiffened Plate and its
equivalent Orthotropic Plate Model ------------------------------------------------------- 33
viii
4.7 Performance of Orthotropic Plate Model of Representative Unit Cell of
Hat Stiffened Plate in the linear static analysis ----------------------------------------- 37
5.1 Displacement and stresses at the centre of the plate for all four edges
simply supported boundary condition, analysed using shell element
formulated and ANSYS 12 ------------------------------------------------------------------ 52
5.2 Displacement and stresses at the centre of the Plate for all four edges fixed
boundary condition, analysed using shell element formulated and ANSYS
12 ------------------------------------------------------------------------------------------------ 53
5.3 Displacement and Elemental Loads at the centre of the Hat Stiffened Plate
for all edges simply supported boundary condition, analysed using shell
element formulated and ANSYS12 --------------------------------------------------------- 53
5.4 Displacement and elemental loads at the centre of the Hat Stiffened Plate
for all four edges fixed boundary condition, analysed using shell element
formulated and ANSYS12 ------------------------------------------------------------------- 54
5.5 Displacement and stresses at the centre of the Hat Stiffened Plate for all
four edges simply supported boundary condition, analysed using
Superelement and conventional finite element -------------------------------------------- 62
5.6 Displacement and Stresses at the centre of the Hat Stiffened Plate all four
edges fixed boundary condition, analysed using Superelement and
conventional finite element ------------------------------------------------------------------ 63
ix