Professional Documents
Culture Documents
How To Attach Magnet Board To Wall +easy
How To Attach Magnet Board To Wall +easy
The only materials that you will need for this super easy DIY project are a large
magnetic sheet that is fitted to the wall, some nails, a hammer, and a sheet of
cardboard.
DIY Magnet Board Wall:
1. Make sure that your magnetic sheet is fitted to the wall area
2. Place the sheet on top of the cardboard
3. Use the hammer and nails to create holes around the outer edges
4. Hold the sheet up to the wall in the desired position
5. Place the nails inside of the holes one by one, hammering them into the wall
6. Add your magnets and decorations and enjoy your magnet wall!
To begin, you will need to fist make sure that your magnetic sheet is fitted to the
wall area that you will be attaching it to. If you need to make any adjustments, you
can use a ruler and marker to measure the sheet and cut it out with a blade before
proceeding to the next steps.
Once you have successfully measured and cut out your metal sheet, you will need to
place it on top of the cardboard on a flat surface to prevent damaging your
workspace.
Use the hammer and nails to create small holes around the outer edges of the metal
sheet. Depending on how long and wide your metal sheet is, you might need to
make several holes to keep it hanging upright once you attach it to the wall.
Keep in mind that each hole you create will hold one nail, so make sure that you
have enough to cover the entire area before you begin attaching it. As a general rule
of thumb, you should make one hole on each of the four corners, and at least one
additional hole in the center of each of the four edges.
Next, you will need to hold the sheet up to the wall in the desired position. This step
might require an additional set of hands in order to be able to come out with a
straight and accurate magnet board.
When it is being held in place, put hte nails inside of each hole and hammer them
into the wall one by one. The nails should be completely submerged into the drywall,
with only the head showing at the top, which will blend in with the surface of the
metal sheet.
After all steps have been completed, there is no need to wait for anything to set or
dry. You can immediately place your magnets and decorations onto the magnetic
board and start using it right away!
The first thing to keep in mind before starting your DIY project is to have another
person on hand to make sure the process runs as smoothly as possible. Although the
cutting of the sheet and creation of holes can be done by just one person, you will
most likely need someone to hold it in place for you when you are attaching it.
If you want to go for a more customized or decorative look for your magnetic wall,
you can use a special paint that has magnetic properties to change the color. To find
this, look for magnetic paint and magnetic primer.
After covering the area with a drop cloth and lots of painter’s tape, you will be able
to apply several coats of both the primer and paint to come out with a fully
functional splash of color on top of your already magnetic board.
Additionally, you can make a magnetic board out of almost any material without
using a metal sheet that might not fit the look you are going for. Using magnetic
primer and paint once again, you can make an alternative material into a magnetic
one that is more of your style.
Lastly, you can use a magnetic sheet with an adhesive back to create a magnetic
wall instead of the processes that were outlined above. This material usually comes
in a convenient roll, and can also be placed directly on the wall or onto another
material that is mounted onto the wall.
Regardless of what method that you choose for your DIY magnetic wall or the
aesthetic you are going for, there are plenty of easy and fool-proof ways to create
this project. Following the simple guide and helpful tips and tricks in this article, you
will certainly come out with something amazing when you are finished.
Related Questions
What are some other ways that you can create a magnetic wall?
Magnetic walls can be created with magnetic primer and paint instead of attaching
other objects to the surface.
How is magnetic paint used?
Magnetic paint is used just like normal paint, but must be applied in several even
coats and stirred more rigorously before using.