This document provides a lesson challenge to start a new Mastercam file with a default lathe, load a supplied tool database file called "MCU Challenge Tools", and edit Tool #1 in the lathe tool manager to adjust the insert corner radius value to 3/64.
This document provides a lesson challenge to start a new Mastercam file with a default lathe, load a supplied tool database file called "MCU Challenge Tools", and edit Tool #1 in the lathe tool manager to adjust the insert corner radius value to 3/64.
This document provides a lesson challenge to start a new Mastercam file with a default lathe, load a supplied tool database file called "MCU Challenge Tools", and edit Tool #1 in the lathe tool manager to adjust the insert corner radius value to 3/64.
This document provides a lesson challenge to start a new Mastercam file with a default lathe, load a supplied tool database file called "MCU Challenge Tools", and edit Tool #1 in the lathe tool manager to adjust the insert corner radius value to 3/64.
Lesson Challenge: Start a new Mastercam file and select the default lathe to get access to the lathe tool manager. Load the supplied tooldb file “MCU Challenge Tools”. Edit Tool #1 and adjust the insert corner radius value to 3/64.