Professional Documents
Culture Documents
Liquip Gantry Plugs: Title: Purpose
Liquip Gantry Plugs: Title: Purpose
THIS DRAWING AND DESIGN IS THE PROPERTY OF LIQUIP INTERNATIONAL PTY LIMITED.
IT MUST NOT BE COPIED OR REPRODUCED IN ANY WAY WHATSOEVER AND/OR PASSED ON
TO ANY THIRD PARTY WITHOUT WRITTEN AUTHORITY.
LIQUIP INTERNATIONAL PTY LIMITED - ENGINEERING DEPARTMENT - 13 HUME RD SMITHFIELD SYDNEY NSW AUSTRALIA 2164
PH: +61 2 9725 9000 FAX: +61 2 9609 4739 EMAIL: engineering@liquip-nsw.com.au
PURPOSE: Connects gantry system to tanker via industry standard bayonet connectors. May be 3
pin or 4 pin style. Specify at time of order, see below.
SPECIFICATION: Designed for use with common industry monitors and vehicles as well as Liquip “Probe
Doctor”.
Standard plug is 4-pin type for leaner, tighter electrical connection to vehicles, but 3 pin is
readily available. All are completely interchangeable with others.
Connecter pattern is 10-pin to industry standard and can cater for up to 8 compartments
with 2-wire probes. The Liquip gantry socket also accommodates 5-wire probes. Check
that your order details your local system, bayonet style and voltage.
Cable is ten-core self-coiling (8m reach) with petroleum-resistant outer. Each core is 32
strand tinned copper. Standard connection is M25 conduit, an adaptor to ¾" NPT is
available (supplied as standard with junction box).
Socket is heavily ribbed for better grip and bayonet positions clearly visible by being
mounted on bosses.
MOUNTING: Junction box has two pre-drilled internal mounting holes for 6mm diameter bolts.
ASSOCIATED
EQUIPMENT: PD100 Series “Probe Doctor” overfill monitor.
TP Series “ground Boss” truck plug.