Professional Documents
Culture Documents
Suggestions On The Use of Control
Suggestions On The Use of Control
Suggestions On The Use of Control
of control
CONTROL AND COMMANDS
SMART MCP/MC4P
INDEX
INDEX .............................................................................................................................................................. 1
Programming page ............................................................................................................................................ 2
Create a new program ....................................................................................................................................... 3
Axis and functions list ...................................................................................................................................... 3
Insert a program step ......................................................................................................................................... 4
Delete a step ...................................................................................................................................................... 4
Save a program ................................................................................................................................................. 5
Delete, Modify, or Transfer a stored program .................................................................................................. 6
Import all the programs from USB key ............................................................................................................ 6
Teach-In Mode .................................................................................................................................................. 7
Machine diagnostic page................................................................................................................................... 8
Parameters Page .............................................................................................................................................. 10
Information and Language selection ............................................................................................................... 11
Language selection.......................................................................................................................................... 11
Alarm signals .................................................................................................................................................. 12
M2030005IN 1
CONTROL AND COMMANDS
Programming page
By pressing from the main page it is possible to access to the Programming page. Here it is
possible to create new programs inserting a sequence of steps (3 editing pages for a total of 50 steps, for
1000 programs stored in Pro version and in Basic version 2 editing pages for 36 steps for 200 programs
stored) that the machine will automatically carry out.
It is also possible to delete or modify steps of the programs already stored and to import and export the
programs.
1 2 3 4 5
M2030005IN 2
CONTROL AND COMMANDS
By pressing from Programming Page it is possible to access the Editing page, which allows to
create a new program made of a steps sequence .
3) Press to confirm
4) Once the axis is confirmed, the cursor will automatically move to the next box,
touch it and type the position value by means of the touch keyboard.
5) Press to confirm
6) Repeat the procedure for all the axis you wish to program.
Note: At the end of each program, as last step, put “E” (end of program command).
M2030005IN 3
CONTROL AND COMMANDS
*NOTE: By means of the C command, it is possible to start directly the execution of another stored
program (if it was saved with a name made of numbers and not of letters), and then, once performed it, to
go back to the following step of the program that is currently being run.
Step to
insert or
delete
Still into Editing page, it is possible to insert a further step in the program.
Push the icon and insert the step number you want to add, then confirm it with
An empty box will be added on the indicated step just touching the icon ; fill in with axis and
Delete a step
Still into Editing page, it is possible to delete any program's step.
Touch the icon and insert the step number to be deleted. Press to confirm it.
M2030005IN 4
CONTROL AND COMMANDS
Save a program
Once the steps sequence is completed, exit Editing page by pressing icon : it will appear the screen
showed below.
To give a “name” to the program, touch arrow icons to select the letter or number.
Each digit or letter must be confirmed touching.
Touch then the icon SAVE on the screen to confirm; at this point the program has got a “name” and it is
stored.
M2030005IN 5
CONTROL AND COMMANDS
From Programming Page, by touching you accede to this screen, where it is possible to Modify,
Delete or Export a stored program.
Selected program
To modify a program: by means of the SCROLL arrows make selection of the program you want to
modify and touch the MOD icon, you will go inside the Editing Page, then follow same
instructions of “insert a step” .
To transfer a program: insert the removable memory stick into USB port on the electrical
box, select the program to transfer with the SCROLL arrows and touch the relative icon ;
To delete a program: with SCROLL arrows select the desired program and touch CANC icon
to remove it.
Touch icon to transfer the programs from USB key to the Control; this screen will appear:
M2030005IN 6
CONTROL AND COMMANDS
.
Teach-In Mode
From Programming Page, by pressing icon will appear the Teach In programming mode page .
In this page it is possible to memorize a sequence of manually executed steps, which will, by this way, form
a program that the machine can then execute in automatic mode.
Previous
Step
Actual
Step
Next step
1) To write a program step it is sufficient to move one of the rolls or any other axis of the machine and,
once reached the desired position.
2) Touch the MEM icon. The position and the axis will be stored and they will be input in the first
step of the program; the cursor will automatically move to the following step.
3) Repeat the procedure for all the axis you desire to program. To add a Hold step (program pause)
press STOP button.
4) At the end of the sequence, press STOP button for 2 seconds to insert “E” command
(end program), and proceed recording it.
Once the steps list is completed, press to exit and save the Program (Refer to”Save a program” ).
M2030005IN 7
CONTROL AND COMMANDS
From the main page, by pressing the icon , it is possible to enter the diagnostic page, which
visualizes the machine electrical Topographic with the position and the single analysis of the devices inside
of it. This is an easy and exhaustive way to find out any electric malfunction
M2030005IN 8
CONTROL AND COMMANDS
M2030005IN 9
CONTROL AND COMMANDS
Parameters Page
From the main page pressing icon it is possible to accede to the visualization of the machine’s
parameters; to access them, it is necessary to call Promau Srl Assistance to obtain the Password.
Once entered, it is possible to visualize all machine’s parameters.
Total number
of machine’s
work hours
1 2 3 4
M2030005IN 10
CONTROL AND COMMANDS
From the main page by pressing , it is possible to access the page relative to information on
Promau Srl, where it is possible to change the language, by choosing among the following options:
Language set-up
Language selection
By repeatedly pressing the Language selection icon, it is possible to browse all available languages; once a
language is chosen, exit the page with icon ; from now on, the program will run in the selected
language.
M2030005IN 11
CONTROL AND COMMANDS
Alarm signals
In case of malfunction the machine notifies by the following page the presence of any alarm.
Pressing the Stop button and the Acquisition Alarm button to reset the alarm.
List alarms
ERROR NR ERROR DESCRIPTION
0 SOCKET AI1.7 POINT 1 BROKEN OR BAD CONNECTION
1 EMERGEMCY STOP
2 IMPOSSIBLE TO RUN THE PROGRAM (MOTOR OFF?)
4 PRESSURE TRANSDUCER FAULT
5 SOCKET DO1.1 (OUTPUT) OVERLOAD: CHECK IN DIAGNOSTIC PAGE!
6 SOCKET DO1.3 (OUTPUT) OVERLOAD: CHECK IN DIAGNOSTIC PAGE!
7 SOCKET DO1.5 (OUTPUT) OVERLOAD: CHECK IN DIAGNOSTIC PAGE!
8 SOCKET DO1.8 (OUTPUT) OVERLOAD: CHECK IN DIAGNOSTIC PAGE!
9 SOCKET 3 (OUTPUT) OVERLOAD: CHECK IN DIAGNOSTIC PAGE!
10 ATTENTION: MEMORY CORRUPTED! MAKE RESET
11 HYDRAULIC UNIT MOTOR OVERLOAD
12 POWER LOSS OR PHASE SEQ ERROR
13 OIL TEMPERATURE HIGH
14 OIL LEVEL LOW
15 OIL FILTERS OBSTRUCTED
To reset the alarm messages after the solution of the problem, it is necessary to push the ACK icon to cancel
the alarm state and to restart to work with the machine.
M2030005IN 12