Professional Documents
Culture Documents
Upgrading ION Enterprise: Technical Note
Upgrading ION Enterprise: Technical Note
Upgrading ION Enterprise: Technical Note
Worldwide Headquarters The installer converts most of the settings from your old system. The customized
2195 Keating Cross Road settings from the ION Enterprise\config folder are copied into the new ION
Saanichton, BC Enterprise Primary Server’s\config folder. These include:
Canada V8M 2A5
Tel: 1-250-652-7101 ◆ all Vista user diagrams
Fax: 1-250-652-0411
Email: support@pwrm.com ◆ all Designer node diagrams
◆ all previously configured network devices
www.pwrm.com
◆ a copy of the PEGASYS database (PML_LOGS.DB)
© 2002 Power Measurement
Printed in Canada
◆ all reports and TOU schedules
Revision Date: November 28, 2002
MRP: 70070-0114-02
◆ all user defined modems
NOTE
For Technical Services diagnostics purposes, all registry entries from previous versions of ION Enterprise
remain after the upgrade.
A complete new set of the above ION Enterprise files are installed into the
\config-NEW folder. It then updates the \config folder with any new files without
overwriting any existing files. In addition, all Windows Desktop and Start menu
shortcuts are updated, reflecting the new ION Enterprise location.
If your system requires multiple Log Servers, or your Log Server does not reside
on the Primary Server, please contact Technical Services.
If you must preserve any custom shortcuts for Vista or the Alarm Printer before
the upgrade, or you have any special VIP or Log Server configurations, refer to the
following sections.
ION, ION Enterprise, ION Meter Shop, PEGASYS, PowerView, ION 6200, ION 7300, ION 7330, ION 7350, ION 7500, ION 7600, ION 7700, ION 8300, ION 8400, ION 8500, COM128, COM32, Vista, VIP, Designer, Reporter, MeterM@il,
WebMeter, EtherGate, ModemGate, Xpress Card, Feature Packs and “smart energy everywhere” are either trademarks or registered trademarks of Power Measurement. All other trademarks are property of their respective owners.
The information in this document is believed to be accurate at the time of publication, however, Power Measurement assumes no responsibility for errors which may appear here and reserves the right to make changes without notice.
Preserving Custom Shortcuts Upgrading ION Enterprise
ION Enterprise requires Windows Scripting Engine 5.6. The Windows 2000
installer overwrites this version with Windows Scripting Engine 5.0. This causes
the Options Manager to stop working (an ‘Object does not support property or
method’ error), and prevents any devices from being added to the NOM database.
To correct this problem, run scripten.exe from the ION Enterprise installers to
reinstate Windows Scripting Engine 5.6. However, you can avoid this situation
entirely if you upgrade your operating system before you upgrade ION
Enterprise.
Copy any custom shortcuts to a safe location before upgrading. After the upgrade,
adjust each shortcut’s Target properties with the new ION Enterprise pathname.