Tender SPC

You might also like

Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 16

TUTICORIN PORT TRUST

Name of Work : MODI FYING THE EXISTING TRASIT SHED INTO MARRIAGE HALL FOR
CHLP LABOURERS INSIDE ZONE- B

PART I CIVIL CONSTRUCTION WORK

PRICE BID

Schedule of Work
Sl. Unit Rate Amount
Description Of Item Qty
No. In Figures In Words
1 Jungle clearance including uprooting of juliflora trees, rank
vegetation, grass, bush wood ,sapling and trees not exceeding 30
cm girth ,etc and removing not exceeding 50 m outside the sqm
periphery of the area cleaned etc., complete complying with AISS
and as directed by the Departmental Officers.
2 Earth excavation in trenches for foundation for walls in sand and
other loose soils including dressing of sides and ramming of
bottom, lift upto 1.5m, including getting out the excavated soil,
refilling the sides of foundation with excavated earth in layers of
15 cm thick well rammed, watered , consolidation depositing the
cum
surplus earth in place shown by the Departmental officers within a
lead of 50 m and lift of 1.5m and cost including shuttering,
strutting , bailing out of seepage of water wherever necessary and
clearing , leveling the site etc, complete complying with AISS and
as directed by Departmental Officers.
3 Filling in basement with available excavated earth in layers well
rammed and consolidation and watering etc., complete complying cum
with AISS and as directed by the Departmental Officers.
4 Filling the basement under floor and below foundation concrete
for cushioning with river sand in layers watering, ramming,
cum
consolidation etc., complete complying with the AISS and as
directed by the Departmental Officers.
Sl. Unit Rate Amount
Description Of Item Qty
No. In Figures In Words
5 Providing and laying C:C 1:4:8 (1 cement, 4 sand and 8 graded
stone aggregate i.e. 6 parts of 40 mm. nominal size, 2 parts of
20mm metal) for foundation for walls including shoring,
shuttering, mixing, laying, leveling, consolidation, finishing and cum
curing etc., complete complying with AISS and as directed by
Departmental Officers.

6 Providing and laying flooring concrete 10 cm. thick in C:C


1:3:6 (1 cement ,4 and 8 graded stone aggregate i.e. 6 parts of
40mm. nominal size metal, 2 parts of 20 mm metal) including
laying, leveling, consolidation , finishing and curing etc., sqm
complete complying with the AISS and as directed by the
Departmental Officers.

7 Providing and laying C:C 1:2:4 (1 cement, 2 sand and 4 graded


stone aggregate ie 3 parts of 20 mm. nominal size, 1 parts of
10mm metal) and curing etc., complete excluding cost of form
work and reinforcement grills, for all R.C.C works such as
cum
beams, slabs, lintels, sunshade hand rails complete in all floors
upto full height of the building complying with AISS and as
directed by Departmental Officers.

8 Brick Work in Cement Mortar 1:5 (1 cement, 5 sand) using


chamber burnt bricks for walls in all floors upto full height of
the building including cost of scaffolding, cleaning, curing etc.,
cum
complete complying with AISS and as directed by Departmental
Officers.

9 Providing half brick masonry wall using chamber burnt bricks in sqm
Cement Mortar 1:3 (1 cement, 3 sand) for partition wall, parapet
wall etc., in all floors including cost of all materials, labour
scaffolding etc., complete complying with AISS and as directed
by Departmental Officers.

10 Brick Work in Cement Mortar 1:3 (1 cement & 3 sand) using


chamber burnt bricks for steps including cost of scaffolding,
cleaning, curing etc., complete complying with AISS and as cum
directed by Departmental Officers.

11 Providing and fixing 16 mm. dia M.S. rods to window and


ventilator horizontally at 10 cm. center to center in all floors
including cost of M.S. rods, M.S. flats and labour fixing and
applying one coat of ready mixed red oxide primer of approved
Kg
quality, etc., complete complying with AISS and as directed by
Departmental Officers. (Approved quality M.S. rod and flat shall
be procured by the contractor at his cost).

12 Fabricating and placing in position M.S. / Tor steel grills for


RCC works in all floors including cost of steel, cutting, bending,
binding with binding wire and placing in position etc., complete ton
complying with AISS and as directed by Departmental Officers.

13 Providing and fixing M.S. grills of required pattern to window


frames / wall faces etc with M.S. Flats at required spacing and
frame all-round, square or round bars with round head bolts and
nuts or by screws or with hold fast etc to suit the working space
including cost of applying one coat of red oxide primer, cost Kg
inclusive of primer paint, labour for lifting and fixing etc.,
complete complying with AISS and as directed by Departmental
Officers.

14 Providing R.C.C. work smooth finishing of the exposed surface sqm


in all floors with Cement Mortar 1:3(1 cement & 3 sand) 6 mm
thick complying with AISS and as directed by Departmental
Officers.

15 Providing and laying Bearing, Plastering for roof slab, beams


over brick work in Cement Mortar 1:3, 6 mm. thick and finished
with floating coat of neat cement and providing craft paper sqm
complying with AISS and as directed by Departmental Officers.

16 Stucco Plastering on exterior wall upto a height of 10 meters


above ground level with a mixture of washed crushed stone
graded from 6mm. to 12mm. nominal size dashed over and
including fresh cement plaster in two coats, backing coat 10mm.
cement plaster 1:3 (1 cement & 3 sand) and finishing coat
sqm
10mm. cement plaster 1:3 (1 cement & 3 sand) mixed with 10%
finely grounded hydrated lime by volume of cement etc.,
complete complying with AISS and as directed by Departmental
Officers.

17 Providing 20 mm. thick Cement Mortar band , the width and


depth of border being 20 mm. & 50 mm. respectively in Cement
Mortar 1:4(1 cement & 4 sand) complying with AISS and as Mts
directed by Departmental Officers.

18 Plastering the brick wall 15mm. thick in Cement Mortar 1:5(1


cement and 5 sand) for all faces of wall (even and uneven) in all
floors upto full height of the building including necessary
scaffolding, racking of masonry joints, cleaning, curing, etc., sqm
complete complying with AISS and as directed by Departmental
Officers.

19(a) Supplying and fixing in position of the following size and type no
of wooden doors in all floors with hard Kongu wood frames and
Venteak shutters as per drawings including cost of hold fasts and
applying one coat of primer of approved quality and including
cost and fixing of first quality ISI standard, approved by
Department furniture fittings, complying as per list enclosed
with screws / bolts & nut, the rate shall include cost of wood,
labour for wrought and put up, furniture fittings, primer etc.,
complete complying with AISS and as directed by Departmental
Officers.

C.W. Door Size 1.05 m x 2.13 m

19(b) C.W. Door Size 1.00 m x 2.13 m


no
19(c) C.W. Door Size 0.90 m x 2.13 m
no
19(d) C.W. Door Size 1.20 m x 2.13 m
no
20(a) Supplying and fixing in position of the following size and type
of wooden doors in all floors with hard Kongu wood frames and
Venteak shutters as per drawings including cost of hold fasts and
applying one coat of primer of approved quality and including
cost and fixing of first quality ISI standard, approved by
Department furniture fittings, as per list enclosed with screws /
no
bolts & nut, the rate shall include cost of wood, labour for
wrought and put up, furniture fittings, primer etc., complete
complying with AISS and as directed by Departmental Officers.

C.W. Door Size 1.80 m x 1.38 m

20(b) C.W. Door Size 1.20 m x 1.38 m


no
20(c) C.W. Door Size 0.90 m x 1.38 m
no
21 Supplying and fixing in position of the following size and type no
of wooden ventilators in all floors with hard Kongu wood frames
and Venteak shutters as per drawings including cost of hold fasts
and applying one coat of primer of approved quality and
including cost and fixing of first quality ISI standard, approved
by Department furniture fittings, as per list enclosed with screws
/ bolts & nut, the rate shall include cost of wood, labour for
wrought and put up, furniture fittings, primer etc., complete
complying with AISS and as directed by Departmental Officers.

C.W. Ventilator size 0.90 m x 0.60 m Fully glazed Swing Type.


22 Supplying and fixing PVC. Polypan / Sintex frame with door
shutter of size 0.75 x 1.98 m panel 20mm thick including cost
and fixing of approved quality furniture fittings as per list
no
enclosed including conveyance of door frame, shutter and other
accessories and fixing in position etc., complete complying with
AISS and as directed by Departmental Officers
23 Providing and fixing Readymade anodized aluminum door frame
and door shutter of size 1.2m x 2.13m using heavy aluminum
section (manufactured to relevant IS) with 2.5” x 1.5” section for
frame fixing to wall and shutter frame bottom with 4” x 1.75”
and for other horizontal and vertical frames with 1.75” x 1.75”
section, bottom 70 cm height with NOVAPAN shutter of
no
approved quality and top portion of door with 5mm thick glass
of superior quality, cost inclusive of frames, shutters, glass,
labour for fixing, wooden plugs, screws, glazing clips, handles,
lock, floor spring etc., complete complying with AISS and as
directed by Departmental Officers.

24 Supplying and fixing of shelf shutter with C.W frame & shutter
using 20 mm thick C.W planks and applying one coat of wood
primer of approved quality including cost of wood, wrought and
put up, transport and fixing of first quality IS standard furniture sqm
fittings with screws as per list enclosed etc complete complying
with AISS and as directed by Departmental Officers.

25 Applying two coats of water proofing cement paint of approved sqm


colour and quality over plastered surface in all floors including
cleaning, preparation of wall, cost of paint, brushes, scaffolding,
curing the painted surface etc., complete complying with AISS
and as directed by Departmental Officers.

26 Distempering two coats with oil bound distemper of approved


brand and manufacture and of required shade on interior wall
plastered surface in all floors to give an even shade, over and
including priming coat with distemper primer of approved brand
and manufacture after thoroughly brushing the surface free from
sqm
mortar droppings and other foreign matter and including
preparing the surface even and sand papered smooth etc.
complete complying with AISS and as directed by Departmental
Officers.

27 Painting two coats on new wood works in all floors for both
interior and exterior sides with synthetic enamel paint of
approved colour and quality such as Asian – Apcolite, Berger –
Luxol, I.C.I – Dulux etc., excluding cost of priming paint but sqm
including cost of finishing paint, brushes, cleaning etc., complete
complying with AISS and as directed by Departmental Officers.

28 Painting two coats (excluding primer coat) on new steel and


other metal surfaces with Enamel paint, brushing to give an even
shade including cleaning the surface of all dirt, dust and other
sqm
foreign matter etc. complete complying with AISS and as
directed by Departmental Officers.

29 Finishing the wall surface with one coat of cement paint of


approved colour to give an even shade including cleaning the
surface of all dirt, dust and scaffolding charges cost of materials, sqm
labour etc. complete as directed by Departmental Officers.

30 Painting one coat (excluding priming coat) on previously painted sqm


wood surface with synthetic enamel paint of approved colour
best quality such as Berger, Luxol, Asian, Apcolite, ICI, dulux
etc to give an even shade including cleaning the wooden surface
and glass in windows & ventilators of all dirt, dust and other
foreign matter, sand papering etc. complete as per AISS and as
directed by Departmental Officers.

31 Providing and laying ceramic tiles of approved quality and brand


in skirting to walls on 10 mm thick cement plaster 1:3(1 cement
and 3 sand) and joined with white cement slurry and making
good the surface of wall etc cost inclusive of all materials, sqm
adhesives, labour charges etc., complete complying with AISS
and as directed by Departmental Officers.

32 Providing and laying 20mm. thick Cement Concrete topping 1:2


to 3 (1 cement and 2 to 3 stone aggregate of size 4.75mm. and
below by volume) laid over the floor monolithically with base
sqm
concrete (excluding cost of base concrete) complying with AISS
and as directed by Departmental Officers.

33 Providing and laying “Spartek” tiles of approved size in all


floors, threads and rising of steps, landings laid on a bed of
12mm. thick cement mortar 1:3 (1 cement, 3 sand) and joined
with white cement slurry cost including all materials, labour sqm
charges etc complete complying with AISS and as directed by
Departmental Officers.

34 Supplying and fixing in position of Cuddapa slab two side


finished surface of minimum thickness of 20mm to shelves, cost
inclusive of all materials labour charges etc. complete complying sqm
with AISS and as directed by Departmental Officers.

35 Providing form work including centering, shuttering so as to sqm


give rough finish strutting and propping etc., in all floors upto
full height of the building and removal of the same for all the in
–situ R.C.C. works such as beams, slab, lintels, sun-shade, hand
rails etc., complete complying with AISS and as directed by
Departmental Officers.
36 Random Rubble Masonry with hard broken stones in foundation
and plinth with C.M. 1:5 (1 cement, 5 sand) including leveling at
plinth level complying with AISS and as directed by cum
Departmental Officers.

37 Flush pointing on Random Rubble Masonry with Cement Mortar


1:3 (1 cement & 3 sand) complying with AISS and as directed
sqm
by Departmental Officers.

38 Providing and laying Damp Proof Course with C.M. 1:2 (1


cement & 2 sand) 20mm. thick by adding water proofing,
materials as recommended by the manufacturers and curing etc.,
sqm
complete complying with AISS and as directed by Departmental
Officers.

39 Supplying and fixing in position P.V.C. double layered water


tank 1000 lit capacity of first quality and make approved by the
Department including lifted to roof slab, placing in position,
making required number of holes for inlet, outlet, overflow and no
scouver pipe fittings etc., complete as directed by Departmental
Officers.

40 Providing fixing in position precast R.C.C. jally 8cm. thick of


approved design and as per drawing in cement concrete 1:1.5:3
(1 cement, 1.5 sand and 3 graded stone aggregate of size
12.5mm. and below) excluding cost of reinforcement grills but
sqm
including cost of concrete, moulding and labour charges etc.
complete complying with AISS and as directed by Departmental
Officers.

41 Supplying and fixing in position of 110mm.(OD) P.V.C. rain Mts


water down fall pipe with necessary specials including cost of
pipes, specials such as bend, shoe, brackets and CW plugs for
fixing etc., complete complying with AISS and as directed by
Departmental Officers.

42 Providing and laying on terrace, lime concrete weathering course


with graded brick aggregate 25 mm nominal size and 50%
mortar comprising of one lime putty and two surkhi to an
average thickness 80mm., and giving required slope well beaten cum
with beaters, curing, etc., complete complying with AISS and as
directed by Departmental Officers.

43 Finishing the top of weathering course with one course of


machine pressed tiles of size 20 cm x 20cm x 2cm grouted with
cement mortar 1: 3(1 cement, 3 sand) mixed with water proofing
materials as recommended by manufacturer over 12mm layer of
sqm
same cement Mortar 1:3(1 cement,3 sand) and finished neat
complete complying with AISS and as directed by Departmental
officers.

44 Dismantling the existing A.C sheet ,tuff light sheet and A.C
ridges from roof truss etc stacking the serviceable materials and
disposal of un serviceable materials and disposal of
sqm
unserviceable materials with in 100 meters lead complete
complying with AISS and as directed by Departmental officers.

45 Demolition of PCC concrete below G.L. upto 1m depth


including disposal of unserviceable materials with 100m lead
etc. complete complying with AISS and as directed by cum
Departmental Officers.

46 Dismantling and removal of brick wall in all floors including cum


stacking of serviceable materials and disposal of unserviceable
materials with in 100 mts lead etc complete complying with
AISS and as directed by Departmental Officers.

47 Dismantling of 100m dia. A.C pipe with fittings including


stacking of serviceable materials and disposal of unserviceable
materials with in 100 mts lead etc complete complying with Mts
AISS and as directed by Departmental Officers.

48 Demolition of stone masonry above G.L. and stacking of


serviceable materials and disposal of unserviceable materials
with in 100 mts lead etc complete complying with AISS and as cum
directed by Departmental Officers.

49 Dismantling and removal of existing R.C.C. Concrete and


disposal of all materials with in 100 mts lead etc complete
cum
complying with AISS and as directed by Departmental Officers.

TUTICORIN PORT TRUST

Name of Work : MODI FYING THE EXISTING TRASIT SHED INTO MARRIAGE HALL FOR
CHLP LABOURERS INSIDE ZONE- B
PART II WATER SUPPLY AND SANITARY ARRANGEMENTS

PRICE BID

Schedule of Work

Sl. Unit Rate Amount


Description Of Item Qty
No. In Figures In Words
1 Earth work in trenches for laying G.I. Pipe line and sewer line in
sand and other loose soil to full depth as directed including
shuttering, strutting , bailing out of seepage of water wherever
necessary, refilling the trenches after laying of pipe line with
excavated earth in layers of 15 cm thick and depositing the surplus
cum
earth in place shown by the Departmental officers within a lead of
50 m and lift of 1.5m including clearing and leveling the site
complete complying with AISS and as directed by Departmental
Officers.

2 Supplying and laying in trenches 32mm. dia. Medium class G.I.


inflow pipe line with necessary pipes specials such as elbow, tee,
Union joints etc., including wrapping with tar dipped gunnies to
the entire outer surface of the pipe line and the joint being
Mts
tightened including cutting, threading, cost of pipes, specials, etc.,
complete complying with AISS and as directed by Departmental
Officers.

3 Providing and fixing to walls, ceiling and floor with medium class Mts
G.I. pipe of 20mm. dia. with necessary clamps and screws, making
holes in the wall wherever necessary or drilling holes in the roof
making materials, packed the holes with necessary brick work or
concrete wherever necessary and plastering the surface smooth
with required scaffolding, including cost of pipes and specials
such as elbows, tee, union joints, reducers, cutting, threading, etc.,
complete complying with AISS and as directed by Departmental
Officers.

4 Providing and fixing to walls, ceiling and floor with medium class
G.I. pipe of 32mm. dia. with necessary clamps and screws, making
holes in the wall wherever necessary or drilling holes in the roof
making materials, packed the holes with necessary brick work or
concrete wherever necessary and plastering the surface smooth
Mts
with required scaffolding, including cost of pipes and specials
such as elbows, tee, union joints, reducers, cutting, threading, etc.,
complete complying with AISS and as directed by Departmental
Officers.

5 Supplying and fixing in position heavy duty 15mm. dia. (ISI) brass
screw down tap as approved by the Department complying with
no
AISS and as directed by Departmental Officers.

6 Supplying and fixing in position 450mm x 300mm x 6mm size


mirror of best make, first quality approved by the Department
including plywood back, plugs, screws, etc., complete as directed no
by Departmental Officers.

7 Supplying and fixing in position C.P Soap Tray of standard size


and approved make/pattern on the walls including cost of plugs,
no
C.P brass screws, etc., complete as directed by Departmental
Officers.

8 Supplying and fixing in position 20 mm dia. Aluminium towel rail


600 mm long of best Indian make approved first quality with
necessary bracket, C.P brass screws, plugs, etc, complete as no
directed by Departmental Officers.

9 Supplying and fixing in position best Indian make first quality no


(approved by the Department) heavy duty gun metal wheel valve
20mm. dia. as directed by Departmental Officers.
10 Providing and fixing to walls, ceiling and floor 10kg. / cm2
working pressure PVC pipes of 50mm. dia. first quality of
Phinolex or Chemplast approved by the Department with pipe
Mts
fittings and clamps including making good the walls, ceilings etc.,
complete as directed by Departmental Officers.

11 Supplying and fixing in position first quality C.P. fancy bath


shower (approved make / pattern) 15mm. with ball and socket
joint arrangements and bend, union etc., of approved quality as no
directed by Departmental Officers.

12 Supplying and fixing in position 50mm. internal dia. outlet C.I.


Nahani trap of self cleaning design with C.I. grating on the top
including necessary C:C 1:2:4 (1 cement, 2 sand and 4 graded
stone aggregate of 20mm. nominal size metal) for embedding, no
curing, finishing, etc., complete as per standard specifications and
as directed by Departmental Officers.

13 Supplying and fixing in position best Indian make first quality


(approved by the Department) heavy duty gun metal wheel valve
no
32mm. dia. as directed by Departmental Officers.

14 Supplying and fixing in position 75mm. x 75mm. C.I. gratings at


the entrance of outlet of waste water pipe in all floors including
embedding the grating with Cement Mortar 1:3 (1 cement & 3
no
sand) curing, finishing etc., complete as per standard
specifications and as directed by Departmental Officers.

15 Supplying and fixing in position of wash basin of size 550mm. x no


400mm. with specials, 15mm. C.P. heavy duty brass tap with
pentagonal head, PVC water pipe, inflow pipe, coupling, C.I.
brackets, clamps, plugs, screws and giving water supply
connection and painting the exposed connection and brackets with
two coat of approved colour and quality complying with AISS and
as directed by Departmental Officers.

16 Drilling 20mm. dia. hole in the existing Main pipe line and fixing
20mm. dia. ferrnle with necessary C.I. clamps, bolts and nuts
including cost of all pipe specials such as nipple, G.I. reducer, G.I.
no
bend , rubber washer, gunny etc., complete complying with AISS
and as directed by Departmental Officers.

17 Providing and laying in trenches PVC pipes of 110mm. (OD) with


fittings such as bends etc., complete complying with AISS and as
Mts
directed by Departmental Officers.

18 Supplying and fixing of 15mm. Gate valve (Leader make) of


approved quality including cost of material and fixing charges etc.,
complete as per standard specifications and as directed by no
Departmental Officers.

19 Construction of inspection chamber of size 0.60m x 0.60m (inner)


height of 1.25m with bricks in CM 1:5 , necessary excavation for
laying foundation concrete 1:4:8 and finishing with 15mm Tk
plastering in CM 1:5, including fixing light duty C.I. cover with
frame and finished smooth with floating coat of neat cement on no
inner walls and bed concrete, making holes for pipes etc.,
complete complying with AISS and as directed by Departmental
Officers.

20 Providing and fixing White vitreous China pedestal type (E W C)


pan with white seat and lid and 10 lit low level flushing cistern
with necessary specials including making good the walls and floor no
as per AISS and as directed by Departmental Officers.

21 Providing and fixing Stainless steel sink of size 750 x 450 x no


250mm. with specials such as 15mm, CP brass tap with elbow
handle, inflow pipe, waste water pipe and all other connecting
accessories etc., complete complying with AISS and as directed by
Departmental Officers.

22 Providing and fixing 10 Lit capacity gaiser including cost of


material and labour for fixing etc., complete and as directed by
no
Departmental Officers.

23 Removing the existing PVC water tank and refixing the same in
terrace. Cost inclusive of labour for removing, refixing, making
water supply, connection etc., complete and as directed by no
Departmental Officers.

You might also like