Professional Documents
Culture Documents
cvt27 PDF
cvt27 PDF
Transmission: CVT2/JF011E
Subject: Won’t Upshift Past 1:1
Application: All
Issue Date: August, 2016
CVT2/JF011E
Won’t Upshift Past 1:1
This can be caused by indexing the ratio control arm on the valve body incorrectly when placed onto
the transmission case.
First make sure the ratio control arm is set in the correct position before trying to index it during
assembly (figures 1 & 2).
Figure 1
Figure 2
Figure 3
Use a punch or equivalent to hold the control arm in place (figure 4). This will align the control arm
opening with the ratio control rod in the case during assembly (figure 5).
Figure 4
Figure 5