Professional Documents
Culture Documents
TTT - D9R - TEKQ0738 Cat Ultra Strength 40 Glass - Salesgram
TTT - D9R - TEKQ0738 Cat Ultra Strength 40 Glass - Salesgram
Salesgram
December 2001
Cat® Ultra-
Strength 40
Glass for Cat D6R
through D11R
Track-Type Tractors
www.CAT.com
Features Ultra-Strength 40 glass is used at every window location in the
operator’s compartment for improved operator protection. The glass
is framed and is bonded to the outside window frame of the cab.
The windows do not open. Ultra-Strength 40 glass is designed to
188-2904 withstand external pressures of up to 40 psi. It does not provide
additional impact resistance beyond the current standard glass.
ULTRA STRENGTH 40
PPG DUPLATE
LAMINATED
To identify Ultra-Strength 40 glass, a special marking is imprinted
on each window.
AS2 22 0 1 2
DOT 18 M460A
1 2 4 8
Ultra-Strength 40 Glass
window imprint
2
Factory installed Ultra-Strength 40 glass can be ordered on the Ordering Information
D6R, D7R, D8R, D9R, D10R and D11R.
The retrofit kits can be ordered through the Parts and Service
Department. The part numbers are:
3
Compatibility for 197-2716 and 203-8741 Window Kits
(LTTT, Small Rear Window)
T290 76X D10**
T291 84W D10** Kit 197-2716 Consists:
X T315 14Y D9L** 188-2901 Front 1 qty
T322 53Y D8L** 208-1686 Door-LH 1 qty
T403 74Z D11N 208-1687 Door-RH 1 qty
T444 4FB D8L** 188-2903 Side 2 qty
T458 1JD D9N 188-2904 Side (LTTT) 2 qty
T459 2YD D10N 208-1692 Rear (small) 1 qty
191-9292 Shim 2 qty
Installation Instructions
Operator’s Manual Insert
**To determine what kit to order, measure the window opening from inside
the seal. If it measures 48 inches order 197-2716. If it measures 49 inches
order 203-8741.
4
Compatibility for 197-2717 Window Kit (MTTT)
T316 4RC D6H
T328 8KB D6H Kit Consists:
T330 6FC D6H 188-2901 Front 1 qty
T355 77Z D7H 208-1693 Door-LH 1 qty
T356 79Z D7H 208-1694 Door-RH 1 qty
T357 80Z D7H 188-2903 Side 2 qty
T413 3ZF D6H 188-2908 Side (LTTT) 2 qty
T414 5BF D7H 208-1692 Rear (small) 1 qty
T431 4FG D7H 191-9292 Shim 2 qty
T442 3YG D6H Installation Instructions
T457 9TC D8N Operator’s Manual Insert
T535 1XJ D8N
T593 5TJ D8N T718 2EN D7R
T646 8ZJ D6H T719 3DN D7R
T647 9KJ D6H T849 6YZ D8R
T648 5KK D6H T881 ACS D7R
T649 6CK D6H T882 ADW D7R
T663 7XM D8R T883 AFG D7R
T705 2YN D6R T884 AEC D7R
T706 3ZN D6R T885 AGN D7R
T708 4MN D6R T886 ABJ D7R
T709 5LN D6R T897 AEM D6R
T710 6JN D6R T898 AFM D6R
T711 7KN D6R T899 AGM D6R
T712 8LN D6R T900 AAX D6R
T713 9PN D6R T903 ACJ D6R
T716 2HR D7R T904 ADE D6R
T717 9HM D7R T905 AEP D6R
5
The information contained herein is intended for circulation only to Caterpillar and dealer employees whose duties require knowledge of such reports and
is intended exclusively for their information and training. It may contain unverified analysis and facts observed by various Caterpillar or dealer employees.
However, effort has been made to provide reliable results regarding any information comparing Caterpillar built and competitive machines. Effort has been
made to use the latest available spec sheet and other material in the full understanding that these are subject to change without notice. Any reproduction
of this release without the foregoing explanation is prohibited.
TEKQ0738
December 2001
www.CAT.com
© 2001 Caterpillar
Printed in U.S.A.