Professional Documents
Culture Documents
Subject Name: Communication Engineering (Kec-401) Assignment No. 4 (UNIT 4) SUBMISSION DATE: 21/04/2020
Subject Name: Communication Engineering (Kec-401) Assignment No. 4 (UNIT 4) SUBMISSION DATE: 21/04/2020
Subject Name: Communication Engineering (Kec-401) Assignment No. 4 (UNIT 4) SUBMISSION DATE: 21/04/2020
NOTE: Rename this file as your university (complete 10 or 13 digit) roll no and:
STUDENT NAME:
ROLL NO.
SECTION:
ANSWER:
ANSWER:
NOIDA INSTITUTE OF ENGINEERING AND TECHNOLOGY, GREATER NOIDA
Department of Electronics & Communication Engineering
Accredited by NBA and NAAC Approved by AICTE and Affiliated to Dr. A.P.J. Abdul Kalam Tech.
University, UP
ANSWER:
a) A predictor
b) An integrator
c) An Equalizer
d) A Compander
ANSWER:
ANSWER:
ANSWER:
a) True
b) False
ANSWER:
NOIDA INSTITUTE OF ENGINEERING AND TECHNOLOGY, GREATER NOIDA
Department of Electronics & Communication Engineering
Accredited by NBA and NAAC Approved by AICTE and Affiliated to Dr. A.P.J. Abdul Kalam Tech.
University, UP
ANSWER:
Q9: In an ideal TDM system, the cross correlation between two users of the system is
a) 1
b) 0
c) Infinity
d) -1
ANSWER:
ANSWER:
Q11: In ...................... the amplitudes of regularly spaced rectangular pulses vary with the
instantaneous sample values of a continuous message signal in a one-to-one fashion.
a) PAM
b) PWM
c) PPM
d) PCM
ANSWER:
a) True
b) False
NOIDA INSTITUTE OF ENGINEERING AND TECHNOLOGY, GREATER NOIDA
Department of Electronics & Communication Engineering
Accredited by NBA and NAAC Approved by AICTE and Affiliated to Dr. A.P.J. Abdul Kalam Tech.
University, UP
ANSWER:
a) Differentiator
b) Integrator
c) Quantizer
d) None of the mentioned
ANSWER:
a) Granularity
b) Slope overload
c) Granularity & Slope overload
d) None of the mentioned
ANSWER:
a) Speech memory
b) Cross point
c) Connecting point
d) None of the mentioned
ANSWER:
a) Data exchange
b) Galvanic connection
c) Data exchange & Galvanic connection
d) None of the mentioned
ANSWER:
Q17: To achieve high signal to noise ratio, delta modulation must use
a) Under sampling
b) Over sampling
NOIDA INSTITUTE OF ENGINEERING AND TECHNOLOGY, GREATER NOIDA
Department of Electronics & Communication Engineering
Accredited by NBA and NAAC Approved by AICTE and Affiliated to Dr. A.P.J. Abdul Kalam Tech.
University, UP
c) Aliasing
d) None of the mentioned
ANSWER:
a) Amplitude discretization
b) Time discretization
c) Amplitude & Time discretization
d) None of the mentioned
ANSWER:
a) Pulse modulation
b) Frequency modulation
c) Amplitude modulation
d) Phase modulation
ANSWER:
ANSWER:
ANSWER:
NOIDA INSTITUTE OF ENGINEERING AND TECHNOLOGY, GREATER NOIDA
Department of Electronics & Communication Engineering
Accredited by NBA and NAAC Approved by AICTE and Affiliated to Dr. A.P.J. Abdul Kalam Tech.
University, UP
a) 0
b) 1
c) 2
d) 3
ANSWER:
a) Amplitude discretization
b) Time discretization
c) Amplitude & Time discretization
d) None of the mentioned
ANSWER:
ANSWER:
Q25: Which of the following is false with respect to pulse position modulation?
ANSWER:
a) Telemetry systems
b) Remote control models
c) Switch power modes
d) Communication of airplane with ATC
NOIDA INSTITUTE OF ENGINEERING AND TECHNOLOGY, GREATER NOIDA
Department of Electronics & Communication Engineering
Accredited by NBA and NAAC Approved by AICTE and Affiliated to Dr. A.P.J. Abdul Kalam Tech.
University, UP
ANSWER:
Q27: The process of signal compression and expansion used to reduce distortion and noise is
called _____
a) Amplification
b) Companding
c) Compressing
d) Modulating
ANSWER:
Q28: What type of digital modulation is widely used for digital data transmission?
ANSWER:
a) PAM
b) PWM
c) PPM
d) PCM
ANSWER:
ANSWER: