Professional Documents
Culture Documents
Description and Use: Microbiocide For Cooling Systems
Description and Use: Microbiocide For Cooling Systems
Description and Use: Microbiocide For Cooling Systems
Product information
HYDREX 7908 has excellent prodcut stability. The stabilization technology in the product minimizez prodcut
degradation,resulting in extending product life and long-lasting biocidal activity both in storage and and in use.
Advantages
• Can work over wide pH range unlike chlorine
• Effective against biofilms, legionellas and bacteria
• Long terms storage stability
• Compatible with commonly used materials of construction in cooling systems.
Dosing of HYDREX 7908 depends on required residual of total oxidiser and on the settling time. VWS
Engineers will determine the most effective dosage rate according to the working conditions on site.
HYDREX 7908 is injected pure or diluted, into a part of the system where good mixing and diffusion of the
product can be assured. HYDREX 7908 can be injected by a dosing pump.
Specifications
Appearance : Pale yellow liquid
Specific Gravity @ 25oC : 1.35 +/- 0.02
pH of concentrate : 13.0 +/- 0.5
Flash Point : Non-flammable
Freezing point : - 12° C
Bromine content : Approx 15%
Solubility in Water : Complete
Materials Compatibility
Suitable dosing equipment materials are PVC, PVDF, PTFE, PP, and Cast Iron.
Safety Information
Hydrex 7908 must be stored at positive temperatures, in a cool and aerated place.
Hydrex 7908 is classified as corrosive product: the use of safety gloves and goggles is compulsory when
handling this product. In case of contact with eyes or of ingestion, consult a doctor immediately. See Material
Safety Data Sheet for further information.
Please refer to the Material Safety Data Sheet for more detailed information.