Professional Documents
Culture Documents
Innerlynx Installation Instructions: Advance Products & Systems, Inc. at 800-315-6009
Innerlynx Installation Instructions: Advance Products & Systems, Inc. at 800-315-6009
1 2 3
Center the pipe, cable or conduit in wall Connect both ends of the belt assembly Check to be sure all bolt heads are fac-
opening or casing. Make sure the pipe around the pipe. ing the installer. Extra slack or sag is nor-
will be adequately supported on both mal. Do not remove links. Note: On
ends. The Innerlynx is not intended to smaller diameter pipe links may need to
support the weight of the pipe. be stretched.
4 5 6
With a hand tool, pre-tighten the belt as- Slide belt assembly into annular space. Start at 12 o’clock and tighten bolt until
sembly by giving each bolt about 2 turns. rubber begins to “bulge.” Do not tighten
any bolt more than 4 turns at a time. Con-
tinue in a clockwise manner until links
have been uniformly compressed.
(Approx. 2 or 3 rotations)