Professional Documents
Culture Documents
Som Assignment 1 For Iat 1
Som Assignment 1 For Iat 1
Som Assignment 1 For Iat 1
ASSIGNMENT - I
Course Code CE 8395 – STRENGTH OF MATERIALS FOR Academic year: Year/ Sem /Sec:
& Name MECHANICAL ENGINEERS 2019 - 2020 II / IV / A
Blooms
PART – A (5 × 2 = 10 Marks) Cos Mark
level
1 State Hooke’s law. Re CO1 2
Estimate the load carried by a bar if the axial stress is 10 N/mm2
2 Un CO1 2
and the diameter of bar is 10 mm.
3 What is thermal stress? Re CO1 2
4 Define principle stresses and principal plane. Re CO1 2
Draw the shear force diagram for a cantilever beam of span 4m
5 Ap CO2 2
and carrying a point load of 50 kN at midspan.
PART – B (5 × 6 = 30 Marks)
A steel rod of 50 mm diameter is subjected to a force as shown in
figure. Find the elongation of the rod. Take E=2*105 N/mm2 .
6. Re CO1 5
10. Ev CO1 5
Reg No:
PART – C (1 × 10 = 10 Marks)
A cantilever beam of length 3mm carries the point load as shown in
figure. Draw the shear force and bending moment diagrams for the
cantilever beam.
12. Ap CO2 10
Course Outcome(s)
Understand the concepts of stress and strain in simple and compound bars,
CO 1
the importance of principal stresses and principal planes.
Understand the load transferring mechanism in beams and stress
CO 2
distribution due to shearing force and bending moment.