Professional Documents
Culture Documents
Som Assignment 1 For Iat 2
Som Assignment 1 For Iat 2
ASSIGNMENT – II
Course Code CE 8395 – STRENGTH OF MATERIALS FOR Academic year: Year/ Sem /Sec:
& Name MECHANICAL ENGINEERS 2019 - 2020 II / IV / A
Blooms
PART – A (5 × 2 = 10 Marks) Cos Mark
level
List out the assumptions used to derive the simple bending
1 Un CO2 2
equation.
2 What is meant by point of contra-flexure? Re CO2 2
3 Draw the shear stress distribution of I-symmetrical section. Ap CO2 2
What do you mean by Torsional Rigidity of a shaft? Also, give
4 Re CO3 2
the expression for finding power transmitted by a shaft.
The shearing stress in a solid shaft is not to exceed 40 N/mm 2
5 when the torque transmitted is 20000 N-m. Determine the Ap CO3 2
minimum diameter of the shaft.
PART – B (5 × 6 = 30 Marks)
Draw the shear force and bending moment diagrams for the
overhanging be a carrying uniformly distributed load of 2 kN/m
over the entire length and a point load of 2 kN as shown in Figure
6. below. Ap CO2 5