Professional Documents
Culture Documents
Day2 - Control Drawing Builder PDF
Day2 - Control Drawing Builder PDF
ENGINEERING COURSE
Day 2
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
1
FCS INPUT AND OUTPUT FUNCTION
The input and output function support the internal data exchange
inside FCS
and external data exchange between FCS and other equipment.
There are two I/O functions
1. Process I/O function.
2. Software I/O function.
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
2
Process input and output
When defining IOM for FFCS,the IOM created under the [NODE1-4] folder.
Right click [NODE] Folder [Create new] [IOM]
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
3
IOM Definition builder
Ex ADV157 Digital input (32-Channel Status Input)
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
4
Control Drawing Builder
The Control Drawing Builder is used to configure the basic control functions of the FCS.
For CS3000
Double Click Up to 200
Pages
Drawing Comment
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
5
Grid Setting
For easy drawing, you can display the grid on the drawing panel. [Draw] → [Grid Option].
Click
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
Select Mode
Function Block
Wiring
Double Click
Edit Function
Block Detail
Click
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
6
Function Block Detail Builder
Click to Show
Detailed Setting
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
Function Block
The object that represents the function block is called function block symbol.
Tag
Tag name
name
Terminal
Terminal name
name
Block
Block model
model I/O
I/O connection
connection terminal
terminal
(Terminal
(Terminal area)
area)
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
7
Data Link Block
PIO AREAIN
AREAIN AREAOUT
AREAOUT
PIO
An I/O data link block can connect to a process I/O or software I/O.
An external data link block connect to a function block defined in other control drawings
or a function block defined on other control stations.
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
Wiring
Wiring
This object represent the flow of data between function blocks or between
a function block and data link block.
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
8
Text
Text
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
Data Connection
-Data Reference
Data reference is a type of data connection in which data read from the
connection of the function block input terminal. The data value of the
connection destination is read as an input value of the function block in
data reference.
-Data Setting
Data setting is a type of data connection in which data written into the
connection destination from the function output terminal. The value of the
function block output data is sent to the connection destination.
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
9
Data Connection with Other Function Blocks
Is an I/O connection that connects data items such as process variables(PV) and
manipulated output values(MV) held in the other function blocks, to the function
block I/O terminals.
Data reference
Data Setting
Data reference
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
Process Connection
connection with Process I/O
Is an I/O connection that connects the function block I/O terminal
to the process I/O such as analog I/O and contact I/O
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
10
Terminal Connection
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
Terminal
Terminal connection
connection
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
11
Connection by Way of a Switch Block
SW-
SW-33 & SW-
SW-91
Terminal
Terminal connection
connection
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
The regulatory control blocks are the function block perform control
computation processing mainly on the analog input as input signals.
The calculated results are used for process monitor and process control.
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
12
PID Controller Block (PID)
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
13
PID Controller Block (PID)
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
1.Input Processing
Receives a signal from the input terminal and output a process variable (PV).
2.Control Computation Processing
Performs control computation processing by reading the PV and output a manipulated variable (MV)
3.Output Processing
Reads the MV and output the result of control computation processing to the output terminal as an output
signal.
4.Alarm Processing
Detects an abnormality in the PV or MV and notifies the operation and monitoring function.
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
14
Input Indicator Block (PVI)
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
15
Manual Loader Block (MLD)
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
16
Manual Loader Block (MLD)
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
EXAMPLE
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
17
EXAMPLE
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
EXAMPLE
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
18
Note..
Instrumentation & Automation Education Center (IAEC) “Professional Instrument Engineer Training Program”
Yokogawa (Thailand) Ltd. “ CS3000 Engineering Training Course “
19