Professional Documents
Culture Documents
PV776 TSP180940 PDF
PV776 TSP180940 PDF
Connecting Rod
D12D
Connecting Rod
T2019076
This information covers the proper handling and preparation of the connecting rod, be-
cause this “fractured” connecting rod must be separated prior to installation.
NOTE: For information about removing and installing the connecting rod, refer to Ser-
vice Information, group 21.
Contents
• “Connecting Rod” page 2
Illustrations are used for reference only and may differ slightly from the actual vehi-
cle being serviced. However, key components addressed in this information are
represented as accurately as possible.
PV776-TSP180940 USA12617
Page 2
T2019085
CAUTION
Use a vice with soft jaws. Otherwise, damage to the
connecting rod can occur.
T2019077
Volvo Trucks North America, Inc. Date Group No. Page
Service Bulletin 11.2002 216 34 3(4)
CAUTION
Damaged connecting rods or caps must not be in-
stalled. Doing so may cause engine failure.
T2019086
T2019078
WARNING
Always wear appropriate eye protection to prevent the
risk of eye injury due to contact with debris or fluids.
T2019318
Page 4
T2019085
T2019086
CAUTION
Do not use a pneumatic impact wrench to tighten the
bearing caps. Doing so can permanently damage the
mating surfaces.
T2019080