Professional Documents
Culture Documents
Technical Datasheet: MBR Wastewater Treatment Pilot System For Water Recovery & Reuse
Technical Datasheet: MBR Wastewater Treatment Pilot System For Water Recovery & Reuse
Technical Datasheet: MBR Wastewater Treatment Pilot System For Water Recovery & Reuse
RTS-513
MBR Wastewater Treatment Pilot System
For Water Recovery & Reuse
This compact, easy-to-operate newterra Membrane Bioreactor (MBR) system
combines activated sludge biological treatment with our advanced MicroClear™
UF flat sheet membrane. The system, which includes features of our modular,
scalable solutions, can be quickly integrated for piloting the treatment of wastewater
with BOD5 levels of up to 1,500 mg/L. The treated permeate is suitable for reuse
in mining and metallurgical processes, industrial processes, crop irrigation and
other applications. It includes a single skid containing all pumps, controls and the
membrane tank, and a separate 1 m3 anoxic tank and 3.75 m3 aerobic tank. See
inside for system details.
3.7m
4.3m
MicroClear UF Membrane
Like all newterra MBRs,
the RTS-513 Piloting system
features our innovative
MicroClear flat sheet
membrane. It ensures that
permeate meets or exceeds
regulatory requirements for
1.800.420.4056
discharge and reuse. newterra.com
newterra and the newterra logo are trademarks or registered trademarks of newterra ltd. or its affiliates in the U.S. and other countries.
Copyright © 2014. newterra ltd. Specification are subject to change without notice.
System Process Description RTS-513 tech datasheet
Unlike conventional activated sludge systems that rely on gravity-based settlement of the mixed liquor, newterra System Specifications
membrane bioreactor (MBR) systems use ultrafiltration (UF) membranes as a physical barrier against the passage
The typical ADF and MDF are shown below however, the permeate
of all particulate solids. This allows MBRs to operate at four times the concentration level of mixed liquor suspended
extraction pump is VFD controlled to allow fine tuning of the
solids (MLSS) of conventional systems. As a result, MBR systems are very resilient to changes in influent quality,
membrane flux for a given application.
and require a much smaller system footprint – typically only 25% of that required by a conventional system.
100
Global Cleantech
Brockville, ON
Burlington, ON Head Office & Langgöns, Germany
Engineering & Manufacturing Facility MicroClear Office &
Sales Office Manufacturing Facility
Brockville, Canada
Calgary, AB Trooper, PA
Sales Office & Engineering &
Service Center Sales Office
Macon, GA
Manufacturing
Facility
Venice, FL
Sales Office, Manufacturing
Facility & Service Center
Langgöns, Germany
Santiago, Chile
Sales Office &
Service Center
RTS513-1016
1.613.498.1876 | 1.800.420.4056
newterra.com