Professional Documents
Culture Documents
Manual For RAMConcept To SAFE Ultility
Manual For RAMConcept To SAFE Ultility
Manual For RAMConcept To SAFE Ultility
This tool have been updated with ability to bulk import load cases and point loads from excel spreadsheet into
RAM Concept.
Type in new form or paste (use the button in the top left of the form) from clipboard (Microsoft Excel) for Load Cases
Load Case Name - can be any string being your load case name.
https://communities.bentley.com/products/ram-staad/m/structural_analysis_and_design_gallery/273713 1/4
5/3/2020 Update1 - RamConceptSAFEUtility - RAM | STAAD | OpenTower Files - RAM | STAAD | OpenTower - Bentley Communities
Previewing
Load Case Staged
Type Changes
- have to be either "other_dead" or "live_reducible"
Paste values from similar table in Excel (do not copy across column headers).
LC is the Load Case number from Load Cases Table in previous tab
For above screenshot (simple example of only 2 point loads) at location (0, 0) and (3, 3) corresponding to Load
Load Case No1 being the first load case entry in the previous table (DEAD_SAFE)
Load Case No2 being the second load case entry (LIVE_SAFE).
Once both Load Cases and Point Loads Bulk Entry form is completed, click "Load into Main Form" button top right
https://communities.bentley.com/products/ram-staad/m/structural_analysis_and_design_gallery/273713 2/4
5/3/2020 Update1 - RamConceptSAFEUtility - RAM | STAAD | OpenTower Files - RAM | STAAD | OpenTower - Bentley Communities
Verify your entries are now in your main form for both LoadCase and PointLoads
You can then generate your GCFF file, if error regarding "Fix Concrete"
Follow prompt to ensure Concrete table have non-zero properties, this is a prerequisite for the GCFF export
progress
Clicking all the replace buttons will ensure there are no "zero" values for concrete properties.
Once a GCFF file is created, open your existing RAM Concept file and go into Sync STAAD>Update from STAAD
GCFF File.
Select the exported GCFF File, when prompted with items to bring in, ensure to deselect all items except "Loads".
https://communities.bentley.com/products/ram-staad/m/structural_analysis_and_design_gallery/273713 3/4
5/3/2020 Update1 - RamConceptSAFEUtility - RAM | STAAD | OpenTower Files - RAM | STAAD | OpenTower - Bentley Communities
Wentao Zhang
https://communities.bentley.com/products/ram-staad/m/structural_analysis_and_design_gallery/273713 4/4