Professional Documents
Culture Documents
Design and Calculation of Fixing GRC Elements: Rev. No: 1 Date: 26-SEP-15
Design and Calculation of Fixing GRC Elements: Rev. No: 1 Date: 26-SEP-15
REV. NO: 1
DATE: 26-SEP-15
1
REVISION HISTORY
2
INDEX
1 General 5
4 Wind Load 8
5 GRC Specifications 10
7 Stadd Analysis
8 Conclusion 11
3
1 GENERAL
This calculation covers the Analysis and Design of steel frame for External GRC Support
3D Space frame Analysis is done with Dead load, Live load, Wind Load
This document contains load calculations, analysis & design of the main structural
steel elements.
4
2 DESIGN CODES & ASSUMPTIONS
2.2 Assumptions
GRC Elements are firmly connected to steel elements and concrete elements
with the mechanical fasteners with min. of grade 8.8 anchors and S275 plates
5
3 LOADS & LOAD COMBINATIONS
3.1 Loads
1.0 DL
1.0DL + 1.0LL
1.0DL + 1.0WL
1.0DL + 1.0LL + 1.0WL
1.4DL
1.4DL + 1.6LL
1.0DL + 1.4WL
1.4DL + 1.4WL
1.2DL + 1.2LL + 1.2WL
6
4 WIND LOAD
7
INTERNAL PRESSURE CO‐EFFICIENT ON WALL
8
5 GRC SPECIFICATION
9
Conclusion:
*Allowable Deflection of all members considered in the design = Span/350 As per BS 5950
(See Stadd output File )
*Members are safe enough to carry loads in both compression and tension.As per BS 56950
( See Stadd Out put file)