Professional Documents
Culture Documents
CONDENSER DIFFERENTIAL PRESSURE Measurement Test
CONDENSER DIFFERENTIAL PRESSURE Measurement Test
1.)Designated sampling point valve open in condenser CW inlet line and venting done.
2.) Calibrated thermocouple wire insert and reading taken on digital temperature meter .
3.) Same procedure repeated for CW outlet line and other pass.
1.) Close isolating valve and remove C&I local pressure gauge in CW inlet line.
2.) Insert own calibrated pressure gauge and then open isolating valve .
3.) Note down the reading and again close the isolating valve.
4.) Place the local C&I pressure gauge and open the isolating valve .