Professional Documents
Culture Documents
Inspection & Testing Requirements Scope:: Test and Inspection Per
Inspection & Testing Requirements Scope:: Test and Inspection Per
TEST AND INSPECTION PER: Purchase Order requirement & Specifications As Noted Below
0020 R X Raw Material Test Certificates As per applicable code & standard for raw materials
0030 R X Welding Procedure Specification (WPS) and Procedure Refer to P.O., SAEP-352, ASME Section IX as applicable.
Qualification Records (PQR)
0040 R X NDT Personnel and Procedure Verify valid personnel qualification and approved procedure
0020
0010
***
W R X
In process inspection & test requirement
PMI/Ferrite test (As applicable)
Specification Details / Notes:
Per SAES-A-206
0030 R X Tensile, Impact test, Hardness, flattening and Guided bend test Per PO requirement or applicable Code
0050 W R X Nondestructive testing (MT, PT, UT, RT) (As applicable) Per applicable code
0030
0010
***
H X
Final inspection & test requirements
Visual and dimensional test
Specification Details / Notes:
Per approved drawing & fabrication tolerance
IR010000 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 10/31/2016 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 11/17/2013 IR010000 2 of 2
(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE
(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0030 W X Pickling & Passivation (If required) Per PO requirement / Per applicable standard
0050 W X Marking, Handling and packing and shipment Per applicable Code
0070 R X Product test certificates and records As per applicable SAMSS and IR
0040
0010
*** Additional/Supplemental Requirements
If any per PO
Specification Details / Notes:
Notes:
(1) Refer detailed instruction sheet SA175 form IR000003 of inspection requirement for ideal use of this form.
End of IR010000