Professional Documents
Culture Documents
Gravity Louvers PDF
Gravity Louvers PDF
WE SHAPE
AIR
PRODUCT BULLETIN
PRODUCTS CATALOGUE
Dubai Head Office:
Email: betai@betag.com
www.betag.com
index
71
71
B+10mm
B+10mm
B+50mm
B+50mm
71
71
>> The gravity air louver is a wall
mounted device. It is composed of a set
of horizontally mounted blades; they are
normally closed and are free to rotate
about the horizontal axis.
TYPE OF FIXING
NON RETURN DAMPER GRAVITY AIR LOUVERS (DUCTED)
CONNECTING
ROD (OPTIONAL)
AIR FLOW
DUCT SIZE
Extruded
Aliminium profile
1.2 MM Thk
ORDERING SYSTEM
TYPE OF FIXING
Type of Fixing:
Screw fixing
(B) - 10 mm
(B) - 50 mm
Clip fixing
ORDERING SYSTEM
TYPE OF FIXING
screw fixing
(B) - 10 mm
(B) - 50 mm
>> The fresh air louver is composed of an
exhaust air louver which is fixed to a
Clip Fixing
frame that contains a filter by means of
steel hinges.
able.
TYPE OF FIXING
Screw
(B) - 10 mm
(B) + 50 mm
TYPE OF FIXING
>> The fresh air louver is a simple form
of filter louver. It is composed of an Clip
exhaust louver with an aluminium filter
fixed at the back.
TYPES
SAND TRAP LOUVER SAND TRAP LOUVER WITH SAND CHUTE
76 25
25
20
28
20
28
GHT
HEIGHT
HEIGHT
>> The sand trap louver is made of
HEI
Sand Chute
aliuminium section. It is composed of two
sets of inverted U-channels, mounted
vertically on two opposite rows.
120
conventional filtration as it is designed
to separate large size sand particles at
28
low to medium speeds. It is also fitted
28
766
bottom face of the casing to discharge 25
7
separated sand particles.
25
>> Can be supplied (as an option ) with : 50
28 28
2 - Wiremesh
WIDTH (STL-C)
3 - Sliding filter
SAND TRAP LOUVERS BOTTOM VIEW DETAILS
Handle riveted
WIDTH + HEIGHT to frame
HEIGHT
SIZE:
Application :
Type OZR - 1 circular protection Grilles are used in all kinds of low
pressure air conditioning, air heating and ventelation, where round
supply and exhasut air opening require protection against
outside influence (rain, birds, insects etc....).
Description :
Type OZR CIRCULAR PROTECTION Grillers are constructed of round
Frame, horizontal blades and protective grille. They are made of
galvanised sheet metal or aluminium and could be finished with any
RAL paint according to the customer’s request.
Standard sizes and installation: Installation on the round tube via the flange.
6
D3
D2
D1
D
D3
D1
D2
D
H
Installation on the round hole in the sheet.
sizes D D1 D2 D3 B H
400 400 390 419 450 25 37
500 500 490 519 550 25 37
630 630 620 649 680 25 37
800 800 790 819 850 25 37
D1
D2
65
D3
D
900 900 890 919 950 50
1000 1000 990 1029 1070 50 65
requested RAL
S - zincked sheet
A - Al. Sheet
Ordering Specification:
OZR size 400 RAL 9016
Pieces 3
From the chart, the total air pressure drop ( Pcel) in respect to
terminal velocity (v) on free sectional area (A) is calculated.
Pressure Drop, Pa
Efficiency %
60 120
>> To calculate the air flow rate :
CFM= 0.32 A (in”) B(in”) Face velocity(fpm) 100
144 40 80
60
L/S = 0.32 A (mm) B (mm) Face velocity (m/s)
20 40
1000
20
inch w.g.
Pa
0.20
>> Free area ratio (approx.) = 0.82 for 100% open blades.
0.16
PRESSURE DROP
40
144
0.04
1000
0.0
0
07
07 ALL DETAILS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
LOUVERS
PERFORMANCE CHART
inch w.g.
Pa
0.40
100
EXHAUST AIR LOUVERS
0.32
>> Free area ratio ( approx.) = 0.42
80
PRESSURE DROP
>> To calculate the air flow rate :
0.24
60
CFM= 0.42 A (in”) B(in”) Face velocity(fpm)
0.16
144
40
L/S = 0.42 A (mm) B (mm) Face velocity (m/s)
0.08
0
20
2
1000
0.0
0
0 1.0 2.0 3 .0
3.0 m/s
0 200 400 600
600 fpm
80
0.24
0.24
144
0.08
20