Professional Documents
Culture Documents
Data Model Reference Manual
Data Model Reference Manual
Reference Manual
Data Model
Reference Manual
AVEVA Solutions Ltd
Disclaimer
Information of a technical nature, and particulars of the product and its use, is
given by AVEVA
Solutions Ltd and its subsidiaries without warranty. AVEVA Solutions Ltd and its
subsidiaries disclaim
any and all warranties and conditions, expressed or implied, to the fullest extent
permitted by law.
Neither the author nor AVEVA Solutions Ltd, or any of its subsidiaries, shall be
liable to any person or
entity for any actions, claims, loss or damage arising from the use or possession
of any information,
particulars, or errors in this publication, or any incorrect use of the product,
whatsoever.
Copyright
Copyright and all other intellectual property rights in this manual and the
associated software, and every
part of it (including source code, object code, any data contained in it, the
manual and any other
documentation supplied with it) belongs to AVEVA Solutions Ltd or its subsidiaries.
All other rights are reserved to AVEVA Solutions Ltd and its subsidiaries. The
information contained in
this document is commercially sensitive, and shall not be copied, reproduced,
stored in a retrieval
system, or transmitted without the prior written permission of AVEVA Solutions Ltd.
Where such
permission is granted, it expressly requires that this Disclaimer and Copyright
notice is prominently
displayed at the beginning of every copy that is made.
The manual and associated documentation may not be adapted, reproduced, or copied,
in any material
or electronic form, without the prior written permission of AVEVA Solutions Ltd.
The user may also not
reverse engineer, decompile, copy, or adapt the associated software. Neither the
whole, nor part of the
product described in this publication may be incorporated into any third-party
software, product,
machine, or system without the prior written permission of AVEVA Solutions Ltd,
save as permitted by
law. Any such unauthorised action is strictly prohibited, and may give rise to
civil liabilities and criminal
prosecution.
The AVEVA products described in this guide are to be installed and operated
strictly in accordance with
the terms and conditions of the respective license agreements, and in accordance
with the relevant
User Documentation. Unauthorised or unlicensed use of the product is strictly
prohibited.
First published September 2007
AVEVA Solutions Ltd, High Cross, Madingley Road, Cambridge, CB3 0HB, United Kingdom
Trademarks
AVEVA and Tribon are registered trademarks of AVEVA Solutions Ltd or its
subsidiaries. Unauthorised
use of the AVEVA or Tribon trademarks is strictly forbidden.
AVEVA product names are trademarks or registered trademarks of AVEVA Solutions Ltd
or its
subsidiaries, registered in the UK, Europe and other countries (worldwide).
The copyright, trade mark rights, or other intellectual property rights in any
other product, its name or
logo belongs to its respective owner.
Data Model Reference Manual
Contents Page
Reference Manual
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . .1:1
About the Data Model Reference Manual . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 1:1
Organisation of this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 1:1
i 12.0
Data Model Reference Manual
ii 12.0
Data Model Reference Manual
iii 12.0
Data Model Reference Manual
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 3:1
World Element
(WORLD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 3:2
iv 12.0
Data Model Reference Manual
v 12.0
Data Model Reference Manual
Elements in Area
Category. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 4:41
vi 12.0
Data Model Reference Manual
Elements in Cabling
Category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 4:59
Elements in Dataset
Category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 4:69
vii 12.0
Data Model Reference Manual
viii 12.0
Data Model Reference Manual
Block Element
(BLOCK). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 4:104
Compartment World Element (COMWLD). . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 4:104
Hull Block World Element (HBLWLD) . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 4:105
Hull Curved Model World Element (HCMWLD). . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 4:105
Exposed Compartment Element (HCOMPT). . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 4:105
Hull Topology References Element (HTPELE) . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 4:106
Mog World Element
(MOGWLD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 4:106
Reference Surface World Element (RSOWLD). . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 4:106
Surface World Element (SSOWLD). . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 4:107
Standard World Element (STDWLD) . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 4:107
Generic Setup Info Object Element (SUPNFO). . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 4:107
ix 12.0
Data Model Reference Manual
Weld Element
(MWELD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 4:108
Weld Joint Element (MWLDJT) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 4:108
Weld Table Element (MWLDTB) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 4:109
Weld Table World Element
(MWLWLD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4:109
Weld Joint Part Element (MWPART). . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 4:110
x 12.0
Data Model Reference Manual
Cowl Element
(COWL). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 4:124
Damper Element (DAMPER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 4:125
Flexible Element
(FLEXIBLE). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 4:127
Grille Element
(GRILLE). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 4:128
Access Panel Element (HACC) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 4:129
Fan Element
(HFAN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 4:130
Saddle Element
(HSADDLE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 4:131
Internal Damper Element (IDAM). . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 4:133
Mesh Element
(MESH). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 4:134
Offset Element
(OFST). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 4:135
Plate Element (PLATE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 4:136
Plenum Element
(PLENUM). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 4:137
Silencer Element
(SILENCER). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 4:138
Skirt Element
(SKIR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 4:140
Splitter Element
(SPLR). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 4:141
Straight Element (STRT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 4:142
Taper Element (TAPER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 4:143
Threeway Element (THREEWAY) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 4:144
Test Point Element
(TP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 4:146
Transformation Piece Element (TRNS) . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 4:147
Elements in Ladder
Category. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4:148
Cage Segment Element (CAGSEG) . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 4:148
Ladder Element (LADDER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 4:149
Ladder Cage Element (LDRCAGE) . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 4:149
Ladder Exit Element (LDREXT). . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 4:150
Ladder Rung Element
(LDRRUN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 4:150
Ladder Stringer Element (LDRSTR). . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 4:151
Rung Set Element (RUNGSET). . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 4:151
Document Element
(DOCU). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 4:153
Document Set Element
(DOST). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 4:154
Document World Element
(DOWLD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 4:154
Link Document Element (LINKWLD) . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 4:154
Link Class Element
(LNCLAS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 4:155
xi 12.0
Data Model Reference Manual
xii 12.0
Data Model Reference Manual
Branch Element
(BRANCH). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 4:199
Pipe Hanger Element
(HANGER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 4:201
HVAC Element (HVAC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 4:202
Pipe Element (PIPE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 4:203
Restraint Element
(RESTRAINT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 4:205
Elements in Primitive
Category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4:209
Box Element
(BOX). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 4:209
Cone Element
(CONE). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 4:210
Circular Torus Element (CTORUS) . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 4:211
Cylinder Element (CYLINDER) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 4:212
Dish Element (DISH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 4:213
Drawn Line Element
(DRAWING) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 4:213
Extrusion Element (EXTRUSION) . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 4:215
Invisible Point Element
(IPOINT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 4:215
Loop Element (LOOP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 4:216
Loop Points Element
(LOOPTS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 4:216
Polygon Element
(POGON). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 4:217
Polyhedron Element
(POHEDRON). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 4:218
Point Element
(POINT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 4:219
Polyhedron Face Element (POLFACE) . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 4:219
xiii 12.0
Data Model Reference Manual
Elements in Reference
Category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4:237
xiv 12.0
Data Model Reference Manual
xv 12.0
Data Model Reference Manual
Elements in System
Category. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4:287
xvi 12.0
Data Model Reference Manual
xvii 12.0
Data Model Reference Manual
xviii 12.0
Data Model Reference Manual
xix 12.0
Data Model Reference Manual
Database Element
(DB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 7:1
Global List of DBs Allocated to Location Element (DBALL). . . . . . . . . . . . . .
. . . . . . . . . . . 7:1
Database List Element
(DBLI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 7:2
Database Location Information Element (DBLOC) . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 7:2
Global Location World Element (GLOCWL). . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 7:2
Global Role World Element (GROLWL). . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 7:3
Global Group Element (GRP). . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 7:3
Global Group List Element
(GRPLI). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 7:3
Global Status World Element (GSTAT) . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 7:4
Global Stamp World Element (GSTWLD) . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 7:4
Global Team World Element (GTMWL).. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 7:4
Global Link Element
(LNK). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 7:5
Global Link List Element (LNKLI). . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 7:5
Global Location Element
(LOC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 7:5
Global Location List Element
(LOCLI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 7:6
Permissible Operations Element
(PEROP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7:6
Role Element
(ROLE). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 7:7
Stamp Element
(STAMP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 7:7
Stamp List Element
(STLST) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 7:7
Team Element
(TEAM). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 7:8
World Element
(WORLD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 7:8
xx 12.0
Data Model Reference Manual
World Element
(WORLD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 8:20
xxi 12.0
Data Model Reference Manual
xxii 12.0
Data Model Reference Manual
xxiii 12.0
Data Model Reference Manual
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 12:1
xxiv 12.0
Data Model Reference Manual
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 13:1
Pseudo
Attributes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. .14:1
Attribute Category: Name
Related . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14:1
Attribute Category: Element Type
Related . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14:1
Attribute Category: Database
Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14:2
Attribute Category: Rules Related . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 14:3
Attribute Category: Data
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14:3
Attribute Category: Change History. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 14:3
Attribute Category: Claim Related . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 14:5
Attribute Category: Extract
Related. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14:6
Attribute Category: Allowed Operation . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 14:7
Attribute Category: Database
Integrity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14:7
Attribute Category: Database. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 14:8
xxv 12.0
Data Model Reference Manual
xxvi 12.0
Data Model Reference Manual
Introduction to Attributes. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .15:1
Attribute
Types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 15:1
List of All Attributes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 15:3
xxvii 12.0
Data Model Reference Manual
xxviii 12.0
Data Model Reference Manual
Introduction
1 Introduction
This manual is written for experienced users of AVEVA Plant who need to use
commands;
for example, to write batch macros or to customise the GUI. If you are going to
customise
the GUI, you will also need to refer to the Software Customisation Guide and
Software
Customisation Reference Manual for information about PML, the AVEVA programming
language.
Elements in the Design Describes the Elements within the Design Database.
Database
Elements in the Dictionary Describes the Elements within the Dictionary Database.
Database
Elements in the Draft Describes the Elements within the Draft Database.
Database
Elements in the Global Describes the Elements within the Global Database.
Database
Elements in the Manu Describes the Elements within the Manu Database.
Database
Elements in the Property Describes the Elements within the Property Database.
Database
Elements in the Spooler Describes the Elements within the Spooler Database.
Database
1:1 12.0
Data Model Reference Manual
Introduction
Elements in the System Describes the Elements within the System Database.
Database
Elements in the Transaction Describes the Elements within the Transaction
Database Database.
Pseudo Attributes A complete list of all Pseudo Attributes within PDMS.
Introduction to Attributes Describes the different types of attributes followed by
a
complete list of attributes within PDMS.
Note: For a comprehensive list of PDMS attributes and pseudo-attributes, see the
Software
Customisation Reference Manual.
1:2 12.0
Data Model Reference Manual
2.1 Introduction
This chapter shows the elements within the Catalogue Database.
Legal Owners:
MTYPE
Legal Members:
None
Legal Owners:
BLTABLE
Legal Members:
SBOLT, TEXT
Attributes:
2:1 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
Legal Owners:
BTSET
Legal Members:
None
Legal Owners:
GMSET
Legal Members:
None
2:2 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
TABWLD
Legal Members:
SBRTAB
Legal Owners:
SECTION, CATEGORY
Legal Members:
BLTP
Legal Owners:
CCORSET
2:3 12.0
Data Model Reference Manual
Legal Members:
None
Attributes:
Legal Owners:
WORLD
Legal Members:
Attributes:
Legal Owners:
SECTION
Legal Members:
2:4 12.0
Data Model Reference Manual
Legal Owners:
SECTION, CATEGORY
Legal Members:
CABCORE
Attributes:
Legal Owners:
WORLD
Legal Members:
Attributes:
Legal Owners:
SRFTRT
Legal Members:
None
2:5 12.0
Data Model Reference Manual
Legal Owners:
CCTABLE
Legal Members:
None
Legal Owners:
CCTABLE
Legal Members:
None
Attributes:
Legal Owners:
TABGROUP
2:6 12.0
Data Model Reference Manual
Legal Members:
TABITEM, TABHEADER
Description Description
Number Number
attribute expression
Lhide Hide flag for catalogue datasets: True if property is not shown on form
Legal Owners:
DTSET
Legal Members:
None
Legal Owners:
DRSYLK
2:7 12.0
Data Model Reference Manual
Legal Owners:
DRSSET
Legal Members:
None
Legal Owners:
LTABLE
Legal Members:
None
Legal Owners:
Legal Members:
DATA
2:8 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
CATEGORY, SECTION
Legal Members:
None
Legal Owners:
Legal Members:
Legal Owners:
STSECTION, STCATEGORY
2:9 12.0
Data Model Reference Manual
Legal Members:
In the existing PDMS catalogue the only element which completely describes a
catalogue
element is a SPCO. This has CATR, MATX, DETA, BLTR and CMPR references to
respectively the geometry, material text, detail text, bolting details and physical
properties.
However, much work could be carried out before the Specs have been created such as
conceptual design and Diagrams.
The GPART catalogue element has all the significant attributes of a SPCO but is
more
permanent.
It is for use within Specon macros and has the Pseudo attribute PRTXRF which lists
the
SPCO�s referencing a GPART.
Attributes:
Legal Owners:
PRTWLD, PRTELE
Legal Members:
None
2:10 12.0
Data Model Reference Manual
Description:
This is a subsidiary World that contains only GROUPs and is owned by the main WORLD
element.
Attributes:
Legal Owners:
WORLD
Legal Members:
GROUP
Description:
You may define as a GROUP any collection of elements in the database, assembling
these
elements as a single GROUP unit.
Attributes:
Legal Owners:
GPWLD
Legal Members:
None
2:11 12.0
Data Model Reference Manual
Legal Owners:
STSECTION, STCATEGORY
Legal Members:
None
Legal Owners:
GMSET
Legal Members:
2:12 12.0
Data Model Reference Manual
Legal Owners:
GMSET
Legal Members:
None
Legal Owners:
GMSET
Legal Members:
2:13 12.0
Data Model Reference Manual
Legal Owners:
GMSET
Legal Members:
Legal Owners:
BLTABLE
Legal Members:
DTABLE, TEXT
Legal Owners:
BLTABLE
2:14 12.0
Data Model Reference Manual
Legal Members:
MBOLT, TEXT
Legal Owners:
MBLIST
Legal Members:
None
Legal Owners:
UNIT
Legal Members:
MTYPE
Legal Owners:
MSET
Legal Members:
ATLIST
Attributes:
2:15 12.0
Data Model Reference Manual
Legal Owners:
WORLD
Legal Members:
NOMINB
Legal Owners:
STSECTION, STCATEGORY
Legal Members:
Legal Owners:
Legal Members:
None
2:16 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
None
2:17 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
None
Legal Owners:
NBRWLD
Legal Members:
None
Attributes:
Legal Owners:
TABWLD
Legal Members:
SNOTAB
2:18 12.0
Data Model Reference Manual
Pylength Y length
Pzlength Z length
NoDims No Dims Flag
Legal Owners:
Legal Members:
None
Legal Owners:
Legal Members:
None
2:19 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
None
Legal Owners:
Legal Members:
None
2:20 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
None
Legal Owners:
Legal Members:
SLOOP
Pbaxis Direction
Pangle Angle subtended
NoDims No Dims Flag
Legal Owners:
Legal Members:
SLOOP
Legal Owners:
Legal Members:
None
Legal Owners:
Legal Members:
None
Legal Owners:
Legal Members:
None
Attributes:
Legal Owners:
CATEGORY, SECTION
2:23 12.0
Data Model Reference Manual
Legal Members:
None
Legal Owners:
PTSSET
Legal Members:
None
Attributes:
Legal Owners:
PRTWLD, PRTELE
2:24 12.0
Data Model Reference Manual
Legal Members:
Attributes:
Legal Owners:
WORLD
Legal Members:
PRTELE, GPART
Legal Owners:
PTSET
Legal Members:
None
2:25 12.0
Data Model Reference Manual
Legal Owners:
PTSET
Legal Members:
None
2:26 12.0
Data Model Reference Manual
Legal Owners:
PTSET
Legal Members:
None
Legal Owners:
PTSET
Legal Members:
None
Legal Owners:
Legal Members:
2:27 12.0
Data Model Reference Manual
Legal Owners:
STSECTION, STCATEGORY
Legal Members:
PLINE
Legal Owners:
GMSSET
Legal Members:
None
2:28 12.0
Data Model Reference Manual
Legal Owners:
BLIST
Legal Members:
None
Legal Owners:
GMSET
Legal Members:
2:29 12.0
Data Model Reference Manual
Legal Owners:
BRTAB
Legal Members:
SSBRTA
Legal Owners:
SECTION, CATEGORY
Legal Members:
None
2:30 12.0
Data Model Reference Manual
Legal Owners:
GMSET
Legal Members:
Legal Owners:
GMSET
Legal Members:
Legal Owners:
GMSET
2:31 12.0
Data Model Reference Manual
Legal Members:
Legal Owners:
GMSET
Legal Members:
None
Legal Owners:
GMSET
Legal Members:
2:32 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
None
Attributes:
Legal Owners:
CATALOGUE
Legal Members:
Legal Owners:
SPECIFICATION, SELEC
Legal Members:
SELEC, SPCOMPONENT
Legal Owners:
GMSET
Legal Members:
2:34 12.0
Data Model Reference Manual
Legal Owners:
STSECTION, STCATEGORY
Legal Members:
None
Legal Owners:
GMSET
Legal Members:
None
Legal Owners:
2:35 12.0
Data Model Reference Manual
Legal Members:
SVERTEX
Legal Owners:
Legal Members:
None
Legal Owners:
NOMTAB
Legal Members:
SSNOTA
Comment Comment
Dpfname ISODRAFT dynamic detail plotfile name
Symgroup Symbol Group
Symname Symbol Name
Legal Owners:
SPECIFICATION, SELEC
Legal Members:
None
Attributes:
Legal Owners:
SPWLD
Legal Members:
2:37 12.0
Data Model Reference Manual
Legal Owners:
STSECTION, STCATEGORY
Legal Members:
None
Legal Owners:
GMSSET
Legal Members:
SPVERT
2:38 12.0
Data Model Reference Manual
Dy Cartesian Y offset
Dradius Radial offset
Legal Owners:
SPROFILE
Legal Members:
None
Attributes:
Legal Owners:
WORLD
Legal Members:
SPECIFICATION, TABGROUP
Legal Owners:
GMSSET
Legal Members:
None
2:39 12.0
Data Model Reference Manual
Legal Owners:
GMSET
Legal Members:
Attributes:
Legal Owners:
SECTION, CATEGORY
Legal Members:
COATING
2:40 12.0
Data Model Reference Manual
Legal Owners:
GMSET
Legal Members:
Legal Owners:
SBRTAB
Legal Members:
SSSBRT
Legal Owners:
GMSET
Legal Members:
Legal Owners:
SNOTAB
Legal Members:
None
Legal Owners:
GMSET
2:42 12.0
Data Model Reference Manual
Legal Members:
Legal Owners:
SSBRTA
Legal Members:
None
Legal Owners:
STSECTION
Legal Members:
Attributes:
Legal Owners:
CATALOGUE
Legal Members:
Legal Owners:
SLOOP
Legal Members:
None
Attributes:
Legal Owners:
SPWLD
Legal Members:
CTABLE
Legal Owners:
CTABLE
Legal Members:
TABHQUESTION
Legal Owners:
TABHEADER
Legal Members:
None
2:45 12.0
Data Model Reference Manual
Legal Owners:
CTABLE
Legal Members:
TABQUESTION
Legal Owners:
TABITEM
Legal Members:
None
Attributes:
Legal Owners:
WORLD
2:46 12.0
Data Model Reference Manual
Legal Members:
BRTAB, NOMTAB
Description:
TEXT is a general element that can occupy most positions in the hierarchy. It can
be used to
store additional information about an owning or adjacent element.
Attributes:
Legal Owners:
Legal Members:
None
Legal Owners:
GMSET
Legal Members:
None
2:47 12.0
Data Model Reference Manual
Legal Owners:
USECTION
Legal Members:
None
Attributes:
Legal Owners:
WORLD
Legal Members:
Legal Owners:
UNIT
Legal Members:
UDEFINITION
2:48 12.0
Data Model Reference Manual
Description:
The WORLD is the topmost level of the design hierarchy within which all other
elements
exist. It cannot be deleted or copied in the same way that applies to say, a ZONE
or a BOX.
Its existence is controlled outside DESIGN by the ADMINISTRATION module of PDMS.
Attributes:
Legal Owners:
None
Legal Members:
2:49 12.0
Data Model Reference Manual
2:50 12.0
Data Model Reference Manual
3
Elements in the Communications Database
3.1
Introduction
This chapter shows the elements within the Communications Database.
3.1.1
Communication Element (COMM)
Attributes:
Status
Locrf Location reference
Ucurd UCURD
Legal Owners:
COMW
Legal Members:
None
3.1.2
Communication World Element (COMW)
Attributes:
Name Name of the element
Prjlock Project lock
Isolt Location isolation flag
COMUST Upgrade flag
Legal Owners:
WORLD
Legal Members:
COMM
3.2
Introduction
This chapter shows the elements within the Catalogue Database.
3:1
12.0
Data Model Reference Manual
Description:
The WORLD is the topmost level of the design hierarchy within which all other
elements
exist. It cannot be deleted or copied in the same way that applies to say, a ZONE
or a BOX.
Its existence is controlled outside DESIGN by the ADMINISTRATION module of PDMS.
Attributes:
Legal Owners:
None
Legal Members:
COMW
3:2 12.0
Data Model Reference Manual
This chapter shows the hierarchy of all the elements available in the Design
database.
WORLD
AREA
GROUP
SET
AREA
See Section 4.2.1
DEFINITION
POINT POINT POLYGON
POINT
INVISIBLE POINT
STRUCTURE PIPE EQUIPMENT HVAC ROUTING BOUNDARY PENALTY PIPE RESTRAINT DATUM
PLANE
VOLUME TRACK
POINT
See Figure 4:2 INVISIBLE POINT
TANGENT POINT
:6
Figure 4:1. The top levels of the Design database hierarchy
ZONE
Design
Figure 4:2. The Equipment and Piping (including Hangers and HVAC elements)
hierarchy
4:1 12.0
Data Model Reference Manual
4:2 12.0
Data Model Reference Manual
STRUCTURE
DESCRIPTOR GROUP
design DRAWING
POLYGON
ROUTING PLANE
primitive PENALTY VOLUME
s ROUTING PLANE
optional SUBFRAMEWORK
See Figure 4:7 See Figure 4:8 See Figure 4:9 See Figure 4:10
Figure 4:6. The top-level Structural elements hierarchy
SECTION
SECTION
DISTRIBUTED
LOAD
SUBFITTING SECTION
VERTEX
SUBJOINT
GENERIC SECTION
SPINE JLDATUM
PLDATUM
POINSP CURVE
FIXING
4:3 12.0
Data Model Reference Manual
PRIMARY NODE
Attributes:
Legal Owners:
ACCSET
Legal Members:
None
4:4 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
Legal Members:
ACCPNT
Attributes:
Legal Owners:
WORLD
Legal Members:
4:5 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
BBLOCK
Legal Members:
Attributes:
Legal Owners:
DETGRP
Legal Members:
Attributes:
Legal Owners:
CLNCGR
Legal Members:
Attributes:
4:7 12.0
Data Model Reference Manual
Legal Owners:
CLNCGR
Legal Members:
Attributes:
Legal Owners:
CLNPNGRID
Legal Members:
Attributes:
Legal Owners:
CLNPNGRID
Legal Members:
GENSEC
4:8 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
CEILIN
Legal Members:
Attributes:
4:9 12.0
Data Model Reference Manual
Legal Owners:
CLNCGR
Legal Members:
Attributes:
Legal Owners:
STRUCTURE, DETGRP
Legal Members:
4:10 12.0
Data Model Reference Manual
4:11 12.0
Data Model Reference Manual
Legal Owners:
DETGRP, WLOPEN
Legal Members:
TMPLATE, FIXING
Attributes:
Legal Owners:
Legal Members:
TMPLATE, FIXING
Attributes:
Legal Owners:
STRLNG, PLTFRM
Legal Members:
Attributes:
Legal Owners:
DETGRP, WLFIXU
Legal Members:
TMPLATE, FIXING
Attributes:
Legal Owners:
DETGRP
Legal Members:
FLRLAY, LOOP
4:13 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
FLRCOV
Legal Members:
None
Attributes:
Legal Owners:
Legal Members:
TMPLATE, FIXING
4:14 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
DETGRP, WLFIXU
Legal Members:
TMPLATE, FIXING
Attributes:
4:15 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
Attributes:
Legal Owners:
RUTVOLUME, HANDRA
Legal Members:
HRGATE, RATTA
Attributes:
Legal Owners:
HRFEAT
Legal Members:
TMPLATE, FIXING
Attributes:
Legal Owners:
RUTVOLUME, HANDRA
Legal Members:
Attributes:
Legal Owners:
HRPNSE
4:17 12.0
Data Model Reference Manual
Legal Members:
TMPLATE, FIXING
Attributes:
Legal Owners:
RUTVOLUME, HANDRA
Legal Members:
HRPANE
Attributes:
Legal Owners:
POSTSE
Legal Members:
TMPLATE
4:18 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
Legal Members:
TMPLATE, FIXING
Attributes:
Legal Owners:
Legal Members:
TMPLATE, FIXING
4:19 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
DETGRP
Legal Members:
LOOP
Attributes:
Legal Owners:
STRLNG, PLTFRM
Legal Members:
GENSEC, PANEL
Attributes:
Legal Owners:
INVLST
Legal Members:
None
Attributes:
Legal Owners:
Legal Members:
INVELEMENT
4:21 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
EXTFRM, HRKPSE
Legal Members:
None
Attributes:
Legal Owners:
PLOPEN
Legal Members:
RATTA
4:22 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
Legal Members:
4:23 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
STRLNG, PLTFRM
Legal Members:
Attributes:
Legal Owners:
PLFEAT
Legal Members:
RPATH, OPENFE
4:24 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
STRUCTURE
Legal Members:
Attributes:
Legal Owners:
STRLNG, PLTFRM
Legal Members:
GENSEC, PANEL
Attributes:
Legal Owners:
RUTVOLUME, HANDRA
Legal Members:
HRPOST
Attributes:
4:26 12.0
Data Model Reference Manual
Legal Owners:
RAILSE
Legal Members:
None
Attributes:
Legal Owners:
RUTVOLUME, HANDRA
Legal Members:
Attributes:
Legal Owners:
Legal Members:
None
Attributes:
Legal Owners:
Legal Members:
REFDAT, DRAWING
Attributes:
Legal Owners:
APPLDATA, BLEVEL
Legal Members:
Attributes:
4:29 12.0
Data Model Reference Manual
Legal Owners:
SEGSEQ
Legal Members:
None
Attributes:
Legal Owners:
Legal Members:
Attributes:
4:30 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
Attributes:
Legal Owners:
RBRAN, CWBRAN
Legal Members:
RSEG, CWSEG
Attributes:
Legal Owners:
None
Legal Members:
None
Attributes:
4:31 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
None
Attributes:
4:32 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
Attributes:
Legal Owners:
DETGRP, WLOPEN
Legal Members:
TMPLATE, FIXING
4:33 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
CTWALL
Legal Members:
WLPANE
Attributes:
Legal Owners:
CTWALL
Legal Members:
Attributes:
4:34 12.0
Data Model Reference Manual
Legal Owners:
WLFEAT
Legal Members:
Attributes:
Legal Owners:
CTWALL
Legal Members:
WLJOIN
Attributes:
Legal Owners:
WLJNTS
4:35 12.0
Data Model Reference Manual
Legal Members:
None
Attributes:
Legal Owners:
WLFEAT
Legal Members:
DOOR, WINDOW
Attributes:
Legal Owners:
WLCOMP
Legal Members:
TMPLATE
Attributes:
Legal Owners:
WLPRSE
Legal Members:
None
Attributes:
4:37 12.0
Data Model Reference Manual
Legal Owners:
CTWALL
Legal Members:
WLPROF
Description:
The SITE is one level below WORLD and is the most significant element that can be
created, deleted, copied or moved. Each SITE may represent a geographical or
administrative division of the plant.
Attributes:
Legal Owners:
WORLD
Legal Members:
4:38 12.0
Data Model Reference Manual
Description:
TEXT is a general element that can occupy most positions in the hierarchy. It can
be used to
store additional information about an owning or adjacent element.
Attributes:
Legal Owners:
Legal Members:
None
Description:
The WORLD is the topmost level of the design hierarchy within which all other
elements
exist. It cannot be deleted or copied in the same way that applies to say, a ZONE
or a BOX.
Its existence is controlled outside DESIGN by the ADMINISTRATION module of PDMS.
Attributes:
Legal Owners:
None
Legal Members:
4:39 12.0
Data Model Reference Manual
Description:
The ZONE is the administrative element at the third level down the hierarchy. It
may
represent a geographical or administrative division of the plant and can directly
own
Equipment, Civils and Piping elements.
Attributes:
Legal Owners:
Legal Members:
4:40 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
AREADEF
Legal Members:
None
4:41 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
AREADEF
Legal Members:
None
4:42 12.0
Data Model Reference Manual
Attributes:
The origin of the Area Circular Torus is at the centre of the circular arcs of
radii RINSI and
ROUTS, and is defined in the X-Y plane.
Legal Owners:
AREADEF
Legal Members:
None
Attributes:
4:43 12.0
Data Model Reference Manual
Legal Owners:
AREADEF
Legal Members:
None
Attributes:
The origin of the Area Dish is at the centre of the base, and the Z-axis lies along
the normal
to the base.
4:44 12.0
Data Model Reference Manual
Legal Owners:
AREADEF
Legal Members:
None
Attributes:
Legal Owners:
AREADEF
Legal Members:
LOOP
Attributes:
Legal Owners:
AREADEF
Legal Members:
POLPTLIST, POLFACE
4:45 12.0
Data Model Reference Manual
Attributes:
The origin of the Area Pyramid is at the mid-point of the line joining the mid-
points of the top
and bottom surfaces, and the Z-axis is normal to the top and bottom faces.
Legal Owners:
AREADEF
Legal Members:
None
4:46 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
Legal Members:
Attributes:
Legal Owners:
AREAWLD
Legal Members:
AREADEF
Description:
This is a subsidiary World that contains only AREASEs and is owned by the main
WORLD
element.
Attributes:
4:47 12.0
Data Model Reference Manual
Legal Owners:
WORLD
Legal Members:
AREASET
Attributes:
Legal Owners:
AREADEF
Legal Members:
LOOP
Attributes:
The origin of the Area Rectangular Torus is at the centre of the circular arcs of
radii RINSI
and ROUTS, and is defined in the X-Y plane.
4:48 12.0
Data Model Reference Manual
Legal Owners:
AREADEF
Legal Members:
None
Attributes:
The origin of the Area Slope-bottom Cylinder is at the mid-point of the axis (mid-
way
between P1 and P2) and the default orientation is with the axis on the Z-axis
4:49 12.0
Data Model Reference Manual
Legal Owners:
AREADEF
Legal Members:
None
Attributes:
The origin of the Area Snout is at the mid-point of the line joining the centres of
the top and
bottom surfaces and the Z-axis is normal to the top and bottom surfaces.
4:50 12.0
Data Model Reference Manual
Legal Owners:
AREADEF
Legal Members:
None
Attributes:
Legal Owners:
ASMBLY
Legal Members:
None
4:51 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
ASWLD, ASMBLY
Legal Members:
ASITEM, ASMBLY
Attributes:
Legal Owners:
WORLD
Legal Members:
ASMBLY
4:52 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
ASDFWL, ASDFGP
Legal Members:
Attributes:
Legal Owners:
WORLD
Legal Members:
ASDFGP
Attributes:
4:53 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
Attributes:
Legal Owners:
ASDFGP
Legal Members:
Attributes:
Legal Owners:
ASSOC, RESTRIC, DERDAT
4:54 12.0
Data Model Reference Manual
Legal Members:
Attributes:
Legal Owners:
ASSOGP
Legal Members:
Attributes:
Legal Owners:
ASSOGP, ASSOWL
Legal Members:
ASSOC, ASSOGP
4:55 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
WORLD
Legal Members:
ASSOGP
Attributes:
Legal Owners:
Legal Members:
None
Attributes:
4:56 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
Attributes:
Legal Owners:
ASSOC, ASSDEF
Legal Members:
Attributes:
Legal Owners:
RESDEF, DATDEF
Legal Members:
None
4:57 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
RESTRIC, DERDAT
Legal Members:
None
Attributes:
Legal Owners:
Legal Members:
Attributes:
4:58 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
Attributes:
Legal Owners:
Legal Members:
Attributes:
Legal Owners:
ZONE
Legal Members:
Attributes:
Legal Owners:
RBRAN, CWBRAN
Legal Members:
RATTA
Attributes:
Legal Owners:
CABLE
Legal Members:
None
4:60 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
ZONE
Legal Members:
CWBRAN
Attributes:
Legal Owners:
CWMTRL
Legal Members:
DDSE, TMPLATE
Attributes:
4:61 12.0
Data Model Reference Manual
Legal Owners:
CWAY
Legal Members:
Attributes:
Legal Owners:
CWMTRL
Legal Members:
DDSE, TMPLATE
4:62 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
CWBRAN
Legal Members:
Attributes:
Legal Owners:
CWMTRL
Legal Members:
DDSE, TMPLATE
4:63 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
CWMTRL
Legal Members:
DDSE, TMPLATE
Attributes:
Legal Owners:
SEGSEQ
Legal Members:
None
4:64 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
CWMTRL
Legal Members:
DDSE, TMPLATE
Attributes:
Legal Owners:
CWMTRL
Legal Members:
DDSE, TMPLATE
Attributes:
Legal Owners:
RPATH
Legal Members:
None
Attributes:
Legal Owners:
Legal Members:
None
Attributes:
Legal Owners:
RPATH
Legal Members:
None
4:66 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
ZONE
Legal Members:
Attributes:
Legal Owners:
ZONE
4:67 12.0
Data Model Reference Manual
Legal Members:
None
Attributes:
Legal Owners:
Legal Members:
Attributes:
Legal Owners:
RPATH
Legal Members:
None
4:68 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
Legal Members:
None
Attributes:
Legal Owners:
DDATA
Legal Members:
None
Attributes:
Legal Owners:
APPLDWORLD, TPWLD
4:69 12.0
Data Model Reference Manual
Legal Members:
DDSE
Attributes:
shown on form
Maxmin Maximum and minimum values of design property
PTOLER Tolerance on a design property
Legal Owners:
DDSE
Legal Members:
VVALUE, ATTRRL
Attributes:
Legal Owners:
4:70 12.0
Data Model Reference Manual
Legal Members:
DDATA
Attributes:
Legal Owners:
DDATA
Legal Members:
None
Attributes:
4:71 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
Description:
The EQUIPMENT element represents process vessels, storage vessels, heat exchangers,
pumps and any other predefined item that is part of the plant. The unique feature
of this
element is that it may own NOZZLEs in addition to the normal primitive shapes.
Pipework
can be connected to the Nozzles, thus making EQUIPMENTs intrinsic to the process
system.
Attributes:
ZONE
4:72 12.0
Data Model Reference Manual
Legal Members:
Description:
NOZZles are significant to the Design because they provide the link between an
EQUIPMENT (which owns them) and a Pipe (BRANCH) which is connected to each one.
Attributes:
4:73 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
Description:
The Pipe Track is a type of STRUCTURE along which pipes are to be routed. It is a
special
element for the automatic pipe routing function of DESIGN; it cannot own
SUBSTRUCTURES.
Attributes:
Legal Owners:
ZONE
Legal Members:
4:74 12.0
Data Model Reference Manual
Description:
Attributes:
Legal Owners:
EQUIPMENT
Legal Members:
4:75 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
GRIDSYSTEM
Legal Members:
GRIDLN
Attributes:
Legal Owners:
GRIDAXIS
Legal Members:
None
Attributes:
Legal Owners:
GRIDWLD
4:76 12.0
Data Model Reference Manual
Legal Members:
GRIDAXIS
Attributes:
Legal Owners:
WORLD
Legal Members:
GRIDSYSTEM
Attributes:
Legal Owners:
GPSET
Legal Members:
None
Attributes:
Legal Owners:
GPWLD, GPSET
4:77 12.0
Data Model Reference Manual
Legal Members:
GPITEM, GPSET
Description:
This is a subsidiary World that contains only GROUPs and is owned by the main WORLD
element.
Attributes:
Legal Owners:
WORLD
Legal Members:
GROUP, GPSET
Description:
You may define as a GROUP any collection of elements in the database, assembling
these
elements as a single GROUP unit.
Attributes:
Legal Owners:
GPWLD
Legal Members:
None
4:78 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
HANGER
Legal Members:
None
Attributes:
4:79 12.0
Data Model Reference Manual
Legal Owners:
HANGER
Legal Members:
None
Attributes:
Legal Owners:
HANGER
Legal Members:
None
4:80 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
HANGER
Legal Members:
None
Attributes:
4:81 12.0
Data Model Reference Manual
Legal Owners:
HANGER
Legal Members:
None
Attributes:
Legal Owners:
HANGER
Legal Members:
None
4:82 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
HANGER
Legal Members:
None
Attributes:
4:83 12.0
Data Model Reference Manual
Legal Owners:
HANGER
Legal Members:
None
Attributes:
Legal Owners:
HANGER
Legal Members:
None
4:84 12.0
Data Model Reference Manual
Description:
Attributes:
Legal Owners:
HANGER
Legal Members:
None
Attributes:
4:85 12.0
Data Model Reference Manual
Legal Owners:
HANGER
Legal Members:
None
Attributes:
Legal Owners:
HANGER
Legal Members:
None
4:86 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
HANGER
Legal Members:
None
Attributes:
4:87 12.0
Data Model Reference Manual
Angle Angle
Height Height
Radius Radius
Nload Nominal load
Crfarray Connection reference array
Orrf Origin reference (for templates)
Invfarray Array of Inventory Items
Legal Owners:
HANGER
Legal Members:
None
Description:
Attributes:
Legal Owners:
HANGER
Legal Members:
None
4:88 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
HANGER
Legal Members:
None
Attributes:
4:89 12.0
Data Model Reference Manual
Legal Owners:
HANGER
Legal Members:
None
Attributes:
Legal Owners:
HANGER
Legal Members:
None
4:90 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
HANGER
Legal Members:
None
Attributes:
4:91 12.0
Data Model Reference Manual
Angle Angle
Height Height
Nload Nominal load
Invfarray Array of Inventory Items
Legal Owners:
HANGER
Legal Members:
None
Attributes:
Legal Owners:
HANGER
Legal Members:
None
4:92 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
HANGER
Legal Members:
None
Attributes:
4:93 12.0
Data Model Reference Manual
Legal Owners:
HANGER
Legal Members:
None
Attributes:
Legal Owners:
HANGER
Legal Members:
None
4:94 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
HANGER
Legal Members:
None
Attributes:
4:95 12.0
Data Model Reference Manual
Angle Angle
Height Height
Radius Radius
Nload Nominal load
Crfarray Connection reference array
Orrf Origin reference (for templates)
Invfarray Array of Inventory Items
Legal Owners:
HANGER
Legal Members:
None
Attributes:
Legal Owners:
HANGER
Legal Members:
None
4:96 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
HANGER
Legal Members:
None
Attributes:
Legal Owners:
CSURPX, CSURF
Legal Members:
None
4:97 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
CSURPX
Legal Members:
None
Attributes:
Legal Owners:
CPANEL
Legal Members:
None
Attributes:
Legal Owners:
BLOCK
Legal Members:
CPANBO, CPNISE
4:98 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
MOGWLD
Legal Members:
None
Attributes:
Legal Owners:
CSURPX
Legal Members:
None
Attributes:
Legal Owners:
CPANEL
4:99 12.0
Data Model Reference Manual
Legal Members:
None
Attributes:
Legal Owners:
MOGWLD
Legal Members:
None
Attributes:
Legal Owners:
CSTIFF
Legal Members:
None
Attributes:
4:100 12.0
Data Model Reference Manual
Legal Owners:
CSTIFF
Legal Members:
None
Attributes:
Legal Owners:
CSTIFF
Legal Members:
None
Attributes:
Legal Owners:
CSTIFF
Legal Members:
None
Attributes:
Legal Owners:
CSTIFF
Legal Members:
None
Attributes:
Legal Owners:
CSURPX
Legal Members:
CPROTR
Attributes:
Legal Owners:
CPROF
Legal Members:
CSTIFF
4:102 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
CSURPX
Legal Members:
None
Attributes:
Legal Owners:
CPROTR
Legal Members:
Attributes:
Legal Owners:
SSOWLD
4:103 12.0
Data Model Reference Manual
Legal Members:
CCURVE
Attributes:
Legal Owners:
HCMWLD
Legal Members:
Attributes:
Legal Owners:
WORLD, HBLWLD
Legal Members:
CPANEL, HPANEL
Attributes:
Legal Owners:
WORLD
Legal Members:
HCOMPT
Attributes:
Legal Owners:
WORLD
Legal Members:
BLOCK
Attributes:
Legal Owners:
WORLD
Legal Members:
CSURPX
Attributes:
COMWLD
4:105 12.0
Data Model Reference Manual
Legal Members:
None
Attributes:
Legal Owners:
None
Legal Members:
None
Attributes:
Legal Owners:
WORLD
Legal Members:
CPLANE, CPOINT
Attributes:
Legal Owners:
WORLD
Legal Members:
HRSO
4:106 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
WORLD
Legal Members:
CSURF
Attributes:
Legal Owners:
WORLD
Legal Members:
Attributes:
Legal Owners:
STDWLD
Legal Members:
None
4:107 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
MWLDJT
Legal Members:
None
Attributes:
4:108 12.0
Data Model Reference Manual
Legal Owners:
MWLDTB
Legal Members:
MWELD, MWPART
Attributes:
Legal Owners:
MWLWLD
Legal Members:
MWLDJT
Attributes:
Legal Owners:
WORLD
Legal Members:
MWLDTB
4:109 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
MWLDJT
Legal Members:
None
Attributes:
Legal Owners:
HPANEL
Legal Members:
None
Attributes:
4:110 12.0
Data Model Reference Manual
Legal Owners:
HBRCKT
Legal Members:
None
Attributes:
Legal Owners:
STDWLD
Legal Members:
None
Attributes:
Legal Owners:
HPANEL
Legal Members:
4:111 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
HBRCKT
Legal Members:
HPREND
Attributes:
Legal Owners:
HBRCKT
Legal Members:
Attributes:
Legal Owners:
HCTOUT
4:112 12.0
Data Model Reference Manual
Legal Members:
None
Attributes:
Legal Owners:
HPANEL
Legal Members:
HCLIP
Attributes:
Legal Owners:
HPANEL
Legal Members:
None
Attributes:
Legal Owners:
HPANEL
4:113 12.0
Data Model Reference Manual
Legal Members:
None
Attributes:
Legal Owners:
HPANEL
Legal Members:
HPREND
Attributes:
Legal Owners:
HPANEL
Legal Members:
None
Attributes:
4:114 12.0
Data Model Reference Manual
Legal Owners:
HPANEL
Legal Members:
None
Attributes:
Legal Owners:
HPANBO
Legal Members:
None
Attributes:
Legal Owners:
HPANEL
Legal Members:
HPANBI
Attributes:
Legal Owners:
BLOCK
Legal Members:
Attributes:
Legal Owners:
HPANEL
Legal Members:
HPREND
Attributes:
Legal Owners:
HPANEL
Legal Members:
None
4:116 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
HPANEL
Legal Members:
None
Attributes:
Legal Owners:
HBRSTI, HSTIFF
Legal Members:
None
Attributes:
Legal Owners:
4:117 12.0
Data Model Reference Manual
Legal Members:
None
Attributes:
Legal Owners:
HBRSTI, HSTIFF
Legal Members:
None
Attributes:
Legal Owners:
HBRSTI, HSTIFF
Legal Members:
None
Attributes:
Legal Owners:
RSOWLD
4:118 12.0
Data Model Reference Manual
Legal Members:
HRSOF
Attributes:
Legal Owners:
HRSO
Legal Members:
HRSOL
Attributes:
Legal Owners:
HRSOF
Legal Members:
None
Attributes:
Legal Owners:
HPANEL
4:119 12.0
Data Model Reference Manual
Legal Members:
None
Attributes:
Legal Owners:
STDWLD
Legal Members:
None
Attributes:
Legal Owners:
HPANEL
Legal Members:
4:120 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
HPANEL
Legal Members:
None
Attributes:
Legal Owners:
HPANEL
Legal Members:
None
4:121 12.0
Data Model Reference Manual
Attributes:
4:122 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
4:123 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
4:124 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
4:125 12.0
Data Model Reference Manual
Height
Radius
Height
Radius
Loffline Offline flag
Crfarray
Csfbreak
Connection reference array
Spooling marker for components
Tsfbreak Spooling marker for leave tube
Spln
Splt
Mtoref
Old spooler component spool number
Old spooler tube spool number
Extra material list spec references
Cmpx
Ptno
Comparator/Design-Manager exclusion text attribute
Old spooler component part number
Ptntube Old spooler tube part number
Ptnbarray
Jnumber
Old spooler bolt part number
Old spooler joint number
Joiprefix
Mtocomponent
Mtotube
Old spooler joint number prefix
Material list control for components
Material list control for components leave tube
Mtoxarray
Spsp
Dpfname
Dpgridref
Nwelds
Old spooler addition items
Old spooler spool prefix
ISODRAFT dynamic detail plotfile name
ISODRAFT dynamic detail grid reference attribute
Number of attached welds on a piping component
Orrf Origin reference (for templates)
Invfarray
Bselector
Array of Inventory Items
Bolt Selector
Rlock Branch Member Creation Status code (Router)
Rlinclude Array of references of special rules to include
Rlexclude Array of references of special rules to exclude
Hrelative Branch Member Head relative flag (Router)
Deldsg
Mdsysf
Inprtref
Ouprtref
Delivery Designation flag
Reference Array of Model and Design Elements
Inside paint reference
Outside paint reference
Legal Owners:
BRANCH
Legal Members:
None
4:126 12.0
Data Model Reference Manual
Attributes:
4:127 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
4:128 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
4:129 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
4:130 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
Legal Owners:
BRANCH
4:132 12.0
Data Model Reference Manual
Legal Members:
None
Attributes:
4:133 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
4:134 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
4:135 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
4:136 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
4:137 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
4:138 12.0
Data Model Reference Manual
Shop
Spref
Lstube
Shop/Site flag
Component spec reference
Leave tube reference
Arrive Arrive Ppoint
Leave Leave Ppoint
Oriflag
Posflag
Ispec
Tspec
Angle
Height
Radius
Orientation flag
Positioning flag
Insulation spec reference
Tracing spec reference
Angle
Height
Radius
Loffline Offline flag
Crfarray
Csfbreak
Connection reference array
Spooling marker for components
Tsfbreak Spooling marker for leave tube
Spln
Splt
Mtoref
Old spooler component spool number
Old spooler tube spool number
Extra material list spec references
Cmpx
Ptno
Comparator/Design-Manager exclusion text attribute
Old spooler component part number
Ptntube Old spooler tube part number
Ptnbarray
Jnumber
Old spooler bolt part number
Old spooler joint number
Joiprefix
Mtocomponent
Mtotube
Old spooler joint number prefix
Material list control for components
Material list control for components leave tube
Mtoxarray
Spsp
Dpfname
Dpgridref
Nwelds
Old spooler addition items
Old spooler spool prefix
ISODRAFT dynamic detail plotfile name
ISODRAFT dynamic detail grid reference attribute
Number of attached welds on a piping component
Orrf Origin reference (for templates)
Invfarray
Bselector
Array of Inventory Items
Bolt Selector
Rlock Branch Member Creation Status code (Router)
Rlinclude Array of references of special rules to include
Rlexclude Array of references of special rules to exclude
Hrelative Branch Member Head relative flag (Router)
Deldsg
Inprtref
Ouprtref
Delivery Designation flag
Inside paint reference
Outside paint reference
Legal Owners:
BRANCH
Legal Members:
None
4:139 12.0
Data Model Reference Manual
Attributes:
4:140 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
4:141 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
4:142 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
4:143 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
4:144 12.0
Data Model Reference Manual
4:145 12.0
Data Model Reference Manual
Attributes:
4:146 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
4:147 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
Legal Owners:
LDRCAGE
Legal Members:
GENSEC
4:148 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
STRUCTURE, DETGRP
Legal Members:
Attributes:
4:149 12.0
Data Model Reference Manual
Legal Owners:
LADDER
Legal Members:
CAGSEG
Attributes:
Legal Owners:
LADDER
Legal Members:
None
Attributes:
Legal Owners:
LADDER, RUNGSET
4:150 12.0
Data Model Reference Manual
Legal Members:
GENSEC, PANEL
Attributes:
Legal Owners:
LADDER
Legal Members:
GENSEC, PANEL
Attributes:
Legal Owners:
LADDER
Legal Members:
LDRRUN, DDSE
4:151 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
XCELS
Legal Members:
None
Attributes:
Legal Owners:
XCLTN
Legal Members:
XCELL
Attributes:
Legal Owners:
XGEOMETRY
Legal Members:
XCELS
4:152 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
ZONE
Legal Members:
XCLTN, DPSET
Attributes:
Legal Owners:
DOST
Legal Members:
SUBDOCU
4:153 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
DOWLD
Legal Members:
DOCU
Attributes:
Legal Owners:
WORLD
Legal Members:
DOST
Attributes:
Legal Owners:
WORLD
Legal Members:
Attributes:
Legal Owners:
LNFOLD, LINKWLD
Legal Members:
None
Attributes:
Legal Owners:
LNFOLD, LINKWLD
Legal Members:
LNLINK
Attributes:
Legal Owners:
LINKWLD
Legal Members:
LNCLAS, LNDESC, LNFOLD
4:155 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
LNDESC
Legal Members:
None
Attributes:
Legal Owners:
SUBDOCU
Legal Members:
None
Attributes:
Legal Owners:
DOCU
Legal Members:
SSBDOCU
4:156 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
HVAC
Legal Members:
HSPOOL
Attributes:
Legal Owners:
HSLIST
Legal Members:
None
Attributes:
4:157 12.0
Data Model Reference Manual
Legal Owners:
PPLIST
Legal Members:
None
Attributes:
Legal Owners:
PIPE
Legal Members:
PPIECE
Attributes:
Legal Owners:
PIPE
Legal Members:
PSPOOL
4:158 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
PSLIST
Legal Members:
None
Description:
The ATTA is created, selected and consistency-checked in the same way as other
Components. However, it is ignored as an in-line fitting by the CONNECT command and
is
ignored by the reporting utility when listing tube lengths.
Attributes:
4:159 12.0
Data Model Reference Manual
4:160 12.0
Data Model Reference Manual
Description:
Used where a bend is made in tubing. As the Implied Tube must be straight, it is
necessary
to insert such a "Component" where any change of direction occurs. (This is not the
same
as an ELBO, which is a separate catalogue component.)
Attributes:
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
4:162 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Description:
Attributes:
Legal Owners:
BRANCH
Legal Members:
None
Description:
Attributes:
Shop
Spref
Lstube
Shop/Site flag
Component spec reference
Leave tube reference
Arrive Arrive Ppoint
Leave Leave Ppoint
Oriflag
Posflag
Ispec
Tspec
Height
Csfbreak
Orientation flag
Positioning flag
Insulation spec reference
Tracing spec reference
Height
Spooling marker for components
Tsfbreak Spooling marker for leave tube
Spln
Splt
Mtoref
Old spooler component spool number
Old spooler tube spool number
Extra material list spec references
Cmpx
Ptno
Comparator/Design-Manager exclusion text attribute
Old spooler component part number
Ptntube Old spooler tube part number
Ptnbarray
Jnumber
Old spooler bolt part number
Old spooler joint number
Joiprefix
Mtocomponent
Mtotube
Old spooler joint number prefix
Material list control for components
Material list control for components leave tube
Mtoxarray
Spsp
Dpfname
Dpgridref
Nwelds
Old spooler addition items
Old spooler spool prefix
ISODRAFT dynamic detail plotfile name
ISODRAFT dynamic detail grid reference attribute
Number of attached welds on a piping component
Orrf Origin reference (for templates)
Invfarray
Bselector
Array of Inventory Items
Bolt Selector
Rlock Branch Member Creation Status code (Router)
Rlinclude Array of references of special rules to include
Rlexclude Array of references of special rules to exclude
Hrelative Branch Member Head relative flag (Router)
Deldsg
Inprtref
Ouprtref
Delivery Designation flag
Inside paint reference
Outside paint reference
Legal Owners:
BRANCH
Legal Members:
None
4:165 12.0
Data Model Reference Manual
Description:
Attributes:
4:166 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Description:
Attributes:
Legal Owners:
BRANCH
Legal Members:
None
Description:
Attributes:
4:168 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Description:
Attributes:
Legal Owners:
BRANCH
Legal Members:
None
4:170 12.0
Data Model Reference Manual
Description:
Attributes:
Name Name of the element
Position Position
Orientation Orientation
Desparam
Built
Design parameters
Built/Unbuilt flag
Shop
Spref
Lstube
Shop/Site flag
Component spec reference
Leave tube reference
Arrive Arrive Ppoint
Leave Leave Ppoint
Oriflag
Posflag
Ispec
Tspec
Csfbreak
Orientation flag
Positioning flag
Insulation spec reference
Tracing spec reference
Spooling marker for components
Tsfbreak Spooling marker for leave tube
Spln
Splt
Mtoref
Old spooler component spool number
Old spooler tube spool number
Extra material list spec references
Cmpx
Ptno
Comparator/Design-Manager exclusion text attribute
Old spooler component part number
Ptntube Old spooler tube part number
Ptnbarray
Jnumber
Old spooler bolt part number
Old spooler joint number
Joiprefix
Mtocomponent
Mtotube
Old spooler joint number prefix
Material list control for components
Material list control for components leave tube
Mtoxarray
Spsp
Dpfname
Dpgridref
Nwelds
Old spooler addition items
Old spooler spool prefix
ISODRAFT dynamic detail plotfile name
ISODRAFT dynamic detail grid reference attribute
Number of attached welds on a piping component
Orrf Origin reference (for templates)
Invfarray
Bselector
Array of Inventory Items
Bolt Selector
Rlock Branch Member Creation Status code (Router)
Rlinclude Array of references of special rules to include
Rlexclude Array of references of special rules to exclude
Hrelative Branch Member Head relative flag (Router)
Deldsg Delivery Designation flag
4:171 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Description:
Attributes:
Legal Owners:
BRANCH
Legal Members:
None
Description:
Attributes:
4:173 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Description:
4:174 12.0
Data Model Reference Manual
Attributes:
Name Name of the element
Position Position
Orientation Orientation
Desparam
Built
Design parameters
Built/Unbuilt flag
Shop
Spref
Lstube
Shop/Site flag
Component spec reference
Leave tube reference
Arrive Arrive Ppoint
Leave Leave Ppoint
Oriflag
Posflag
Ispec
Tspec
Height
Csfbreak
Orientation flag
Positioning flag
Insulation spec reference
Tracing spec reference
Height
Spooling marker for components
Tsfbreak Spooling marker for leave tube
Spln
Splt
Mtoref
Old spooler component spool number
Old spooler tube spool number
Extra material list spec references
Cmpx
Ptno
Comparator/Design-Manager exclusion text attribute
Old spooler component part number
Ptntube Old spooler tube part number
Ptnbarray
Jnumber
Old spooler bolt part number
Old spooler joint number
Joiprefix
Mtocomponent
Mtotube
Old spooler joint number prefix
Material list control for components
Material list control for components leave tube
Mtoxarray
Spsp
Dpfname
Dpgridref
Nwelds
Old spooler addition items
Old spooler spool prefix
ISODRAFT dynamic detail plotfile name
ISODRAFT dynamic detail grid reference attribute
Number of attached welds on a piping component
Orrf Origin reference (for templates)
Invfarray
Bselector
Array of Inventory Items
Bolt Selector
Rlock Branch Member Creation Status code (Router)
Rlinclude Array of references of special rules to include
Rlexclude Array of references of special rules to exclude
Hrelative Branch Member Head relative flag (Router)
Deldsg
Inprtref
Ouprtref
Delivery Designation flag
Inside paint reference
Outside paint reference
Legal Owners:
BRANCH
4:175 12.0
Data Model Reference Manual
Legal Members:
None
Description:
Attributes:
4:176 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Description:
Attributes:
4:177 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Description:
Attributes:
Loose Loose
Csfbreak Spooling marker for components
Tsfbreak Spooling marker for leave tube
Spln Old spooler component spool number
Splt Old spooler tube spool number
Mtoref Extra material list spec references
Cmpx Comparator/Design-Manager exclusion text attribute
Ptno Old spooler component part number
Ptntube Old spooler tube part number
Ptnbarray Old spooler bolt part number
Jnumber Old spooler joint number
Joiprefix Old spooler joint number prefix
Mtocomponent Material list control for components
Mtotube Material list control for components leave tube
Mtoxarray Old spooler addition items
Spsp Old spooler spool prefix
Dpfname ISODRAFT dynamic detail plotfile name
Dpgridref ISODRAFT dynamic detail grid reference attribute
Nwelds Number of attached welds on a piping component
Allowance Allowance
Orrf Origin reference (for templates)
Invfarray Array of Inventory Items
Bselector Bolt Selector
Rlock Branch Member Creation Status code (Router)
Rlinclude Array of references of special rules to include
Rlexclude Array of references of special rules to exclude
Hrelative Branch Member Head relative flag (Router)
Deldsg Delivery Designation flag
Inprtref Inside paint reference
Ouprtref Outside paint reference
Legal Owners:
BRANCH
Legal Members:
None
Description:
Attributes:
Legal Owners:
BRANCH
4:180 12.0
Data Model Reference Manual
Legal Members:
None
Description:
Element for any type of component not covered by the other classifications.
Attributes:
4:181 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Description:
Attributes:
4:182 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Description:
Component for general usage by items not covered by the other Component types.
Attributes:
Angle
Height
Radius
Angle
Height
Radius
Loffline Offline flag
Crfarray
Csfbreak
Connection reference array
Spooling marker for components
Tsfbreak Spooling marker for leave tube
Spln
Splt
Mtoref
Old spooler component spool number
Old spooler tube spool number
Extra material list spec references
Cmpx
Ptno
Comparator/Design-Manager exclusion text attribute
Old spooler component part number
Ptntube Old spooler tube part number
Ptnbarray
Jnumber
Old spooler bolt part number
Old spooler joint number
Joiprefix
Mtocomponent
Mtotube
Old spooler joint number prefix
Material list control for components
Material list control for components leave tube
Mtoxarray
Spsp
Dpfname
Dpgridref
Nwelds
Old spooler addition items
Old spooler spool prefix
ISODRAFT dynamic detail plotfile name
ISODRAFT dynamic detail grid reference attribute
Number of attached welds on a piping component
Orrf Origin reference (for templates)
Invfarray
Bselector
Array of Inventory Items
Bolt Selector
Rlock Branch Member Creation Status code (Router)
Rlinclude Array of references of special rules to include
Rlexclude Array of references of special rules to exclude
Hrelative Branch Member Head relative flag (Router)
Deldsg
Inprtref
Ouprtref
Delivery Designation flag
Inside paint reference
Outside paint reference
Legal Owners:
BRANCH
Legal Members:
None
4:184 12.0
Data Model Reference Manual
Attributes:
4:185 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Description:
Component for all classes of tee, lateral set-on branch, stub-ins, etc.
Attributes:
Legal Owners:
BRANCH
Legal Members:
None
Description:
Attributes:
Angle Angle
Height Height
Radius Radius
Cref Connection reference
Csfbreak Spooling marker for components
Tsfbreak Spooling marker for leave tube
Spln Old spooler component spool number
Splt Old spooler tube spool number
Mtoref Extra material list spec references
Cmpx Comparator/Design-Manager exclusion text attribute
Ptno Old spooler component part number
Ptntube Old spooler tube part number
Ptnbarray Old spooler bolt part number
Jnumber Old spooler joint number
Joiprefix Old spooler joint number prefix
Mtocomponent Material list control for components
Mtotube Material list control for components leave tube
Mtoxarray Old spooler addition items
Spsp Old spooler spool prefix
Dpfname ISODRAFT dynamic detail plotfile name
Dpgridref ISODRAFT dynamic detail grid reference attribute
Nwelds Number of attached welds on a piping component
Orrf Origin reference (for templates)
Invfarray Array of Inventory Items
Bselector Bolt Selector
Rlock Branch Member Creation Status code (Router)
Rlinclude Array of references of special rules to include
Rlexclude Array of references of special rules to exclude
Hrelative Branch Member Head relative flag (Router)
Deldsg Delivery Designation flag
Inprtref Inside paint reference
Ouprtref Outside paint reference
Legal Owners:
BRANCH
Legal Members:
None
Description:
Attributes:
Orientation Orientation
Desparam
Built
Design parameters
Built/Unbuilt flag
Shop
Spref
Lstube
Shop/Site flag
Component spec reference
Leave tube reference
Arrive Arrive Ppoint
Leave Leave Ppoint
Oriflag
Posflag
Ispec
Tspec
Csfbreak
Orientation flag
Positioning flag
Insulation spec reference
Tracing spec reference
Spooling marker for components
Tsfbreak Spooling marker for leave tube
Spln
Splt
Mtoref
Old spooler component spool number
Old spooler tube spool number
Extra material list spec references
Cmpx
Ptno
Comparator/Design-Manager exclusion text attribute
Old spooler component part number
Ptntube Old spooler tube part number
Ptnbarray
Jnumber
Old spooler bolt part number
Old spooler joint number
Joiprefix
Mtocomponent
Mtotube
Old spooler joint number prefix
Material list control for components
Material list control for components leave tube
Mtoxarray
Spsp
Dpfname
Dpgridref
Nwelds
Old spooler addition items
Old spooler spool prefix
ISODRAFT dynamic detail plotfile name
ISODRAFT dynamic detail grid reference attribute
Number of attached welds on a piping component
Orrf Origin reference (for templates)
Invfarray
Bselector
Array of Inventory Items
Bolt Selector
Rlock Branch Member Creation Status code (Router)
Rlinclude Array of references of special rules to include
Rlexclude Array of references of special rules to exclude
Hrelative Branch Member Head relative flag (Router)
Deldsg
Inprtref
Ouprtref
Delivery Designation flag
Inside paint reference
Outside paint reference
Legal Owners:
BRANCH
Legal Members:
None
4:189 12.0
Data Model Reference Manual
Description:
Attributes:
4:190 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Description:
Attributes:
4:191 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Description:
Attributes:
4:192 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Description:
Attributes:
4:194 12.0
Data Model Reference Manual
Description:
Attributes:
4:195 12.0
Data Model Reference Manual
Legal Owners:
BRANCH
Legal Members:
None
Attributes:
Legal Owners:
FMBEND
Legal Members:
None
Attributes:
4:196 12.0
Data Model Reference Manual
Legal Owners:
FMGRP
Legal Members:
4.22.3
Fabrication Machine Bending Plane Element (FMBPLN)
Piping Fabrication Element
Attributes:
Legal Owners:
FMBEND
Legal Members:
None
4.22.4
Fabrication Machine Bending Springback-stretch Factor Element
(FMBSST)
Piping Fabrication Element
Attributes:
Legal Owners:
FMBEND
Legal Members:
None
4:197
12.0
Data Model Reference Manual
Attributes:
Legal Owners:
FMWLD
Legal Members:
FMBEND, FMWELD
Attributes:
Legal Owners:
FMGRP
Legal Members:
FMWSK
Attributes:
Legal Owners:
WORLD
Legal Members:
FMGRP
4:198 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
FMWELD
Legal Members:
None
Description:
The BRANCH is the key element for all routed piping in the Design model. It
represents a
two-ended entity whose route is defined by its Head, Tail and the sequence of
Components
(Members) between. A BRANCH Head or Tail may be connected to NOZZLEs, multi-way
Components such as TEEs, or other BRANCH Heads or Tails. Alternatively, a Head or
Tail
may be positioned explicitly in space. (All the commands which control the Head and
Tail
attributes are described in Chapter 11.) The remaining BRANCH attributes are for:
� Functional Use
� Information storage
Attributes:
4:199 12.0
Data Model Reference Manual
Lhead
Ltail
Hbore
Tbore
Hconnect
Tconnect
Detail
Lstressed
Linetype
Erection
Temperature
Pressure
Flowdirection
Hstube
Ccentre
Cclass
Safclass
Matref
Fluref
Casref
Pspec
Ispec
Tspec
Duty
Dscode
Ptspec
Inschedule
Splh
Hdmtype
Hdmfarray
Tdmtype
Tdmfarray
Lissue
Wmaximum
Pmaximum
Ptnhead
Smaximum
Jmaximum
Mtohead
Ptnbarray
Drrf
Spsp
Jnumber
�
BACK for flow from tail to head
�
FORW for flow from head to tail
�
OFF to allow the arrows to be turned off
�
BOTH to indicate a two-way flow
�
Any other setting will continue to be treated as
FORWard
Head tube specification
Cost centre
Cost class
Safety class
Material reference
Fluid reference
Case reference
Pipe specification
Insulation spec reference
Tracing spec reference
Duty
Design code
Paint specification
Inspection schedule
Old spooler head tube spool number
ISODRAFT Reference Dimension attribute
ISODRAFT Reference Dimension attribute
ISODRAFT Reference Dimension attribute
ISODRAFT Reference Dimension attribute
True if drawing has been issued
Maximum weld number in current spool drawing
Maximum part number in current spool drawing
Old spooler head tube part number
Maximum spool number in current spool drawing
Maximum joint number in current spool drawing
Material list control for head tube
Old spooler bolt part number
Old spooler drawing reference
Old spooler spool prefix
Old spooler joint number
4:200
12.0
Data Model Reference Manual
Legal Owners:
PIPE, HVAC
Legal Members:
ELBOW, BEND, TEE, VALVE, REDUCER, FLANGE, CROSS, GASKET, DUCTING, VENT,
FTUBE, SHU, COUPLING, CLOSURE, OLET, LJSE, CAP, FBLIND, VTWAY, VFWAY,
TRAP, FILTER, WELD, PCOMPONENT, UNION, INSTRUMENT, ATTACHMENT, TAPER,
TRNS, STRT, OFST, PLENUM, PLATE, THREEWAY, BRCO, MESH, GRILLE, COWL,
DAMPER, HFAN, SILENCER, BATTERY, AHU, STIFFENER, HACC, HSADDLE, IDAM, TP,
SPLR, SKIR, FLEXIBLE
Description:
The HANGER is a two-ended entity which is routed between a BRANCH and supporting
steelwork. It is analogous in many respects to the BRANCH element and can own
Components routed between a Head and Tail. The Head or Tail can be connected to a
piping attachment point (ATTA) or positioned specifically, e.g. on a supporting
member. Its
attributes can be classified as follows:
� Functional and Information attributes for the complete HANGAR (described here).
� Head and Tail attributes (already described).
Attributes:
Legal Owners:
RESTRAINT
Legal Members:
PCLAMP, PCLIP, PLUG, SHOE, UBOLT, POST, TRNN, HELEMENT, HROD, EYRD, RCPL,
TRNB, WASH, CLEVIS, EYENUT, HPIN, HNUT, VSPR, SWBR, SNUB, SCLAMP, SLUG,
BWLD, BBOLT, SOST, STLS, SPACER, WPAD
Attributes:
Legal Owners:
ZONE
Legal Members:
Description:
�
Those which are used directly from the PIPE element (by modules such as
ISODRAFT) as a collective attribute for all the BRANCHes in the PIPE, e.g. Pipe
Spec
(PSPE).
4:203
12.0
Data Model Reference Manual
�
Those which have no direct significance at PIPE level, but which are cascaded
downwards to member BRANCHes (or even Components) where they perform a
particular function, e.g. TEMPERATURE - only used by Branch for insulation,
stressing
etc.
�
Information attributes that can only be reported on, e.g. BUILT.
Attributes:
Legal Owners:
ZONE
Legal Members:
Description:
The area of the hierarchy owned by the RESTRAINT element is provided to allow
modelling
of pipe supports and hangers. The RESTRAINT is an administrative element which can
own
HANGER elements in convenient groupings. It is analogous to the PIPE element.
Attributes:
Legal Owners:
Legal Members:
HANGER, TEXT
4:205 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
None
Legal Members:
DPSET
Attributes:
Legal Owners:
DPSET
Legal Members:
None
4:206 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
DPSET
Legal Members:
None
Attributes:
Legal Owners:
None
Legal Members:
None
Attributes:
4:207 12.0
Data Model Reference Manual
Number Number
Skey Symbol key
Orrf Origin reference (for templates)
Legal Owners:
Legal Members:
Attributes:
Legal Owners:
DPSET
Legal Members:
None
4:208 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
Legal Members:
4:209 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
Legal Members:
4:210 12.0
Data Model Reference Manual
Attributes:
The origin of the Circular Torus is at the centre of the circular arcs of radii
RINSI and
ROUTS, and is defined in the X-Y plane.
Legal Owners:
Legal Members:
4:211 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
Legal Members:
4:212 12.0
Data Model Reference Manual
Attributes:
The origin of the Dish is at the centre of the base, and the Z-axis lies along the
normal to the
base.
Legal Owners:
Legal Members:
Description:
DRAWI is an element which may be used to produce a symbol or shape on a drawing not
normally catered for elsewhere in PDMS. If, for example, it were necessary to show
a
company name in large letters painted on the side of a tank, the letters could be
built up as
DRAWI elements which would be members of the EQUIP containing the tank. Commonly
used to show the centreline of a beam or column.
4:213 12.0
Data Model Reference Manual
Attributes:
The Figure 4:26.: The DRAWI Element shows lines and curves drawn between
Points(P),Tangent Points(T) and Invisible Points(I) for Boundaries and Drawings.
Legal Owners:
Legal Members:
4:214 12.0
Data Model Reference Manual
Description:
Attributes:
Defining an EXTRUsion
Legal Owners:
Legal Members:
Description:
Attributes:
Legal Owners:
Legal Members:
None
4:215 12.0
Data Model Reference Manual
Description:
The LOOP represents a 2D profile which defines the shape of an Extrusion or Solid
of
Legal Members:
VERTEX
Description:
A LOOPTS element holds a set of pointers to the individual Point (POIN) elements
which
define each vertex of a Polyhedron Loop (POLOOP). These pointers are stored in the
VXREFS attribute of the LOOPTS. The POINs referenced are themselves stored under a
Polygon Point List (POLPTL) element.
The points referenced by VXREFS must be stored under a POLPTL under the relevant
POLYHE or NPOLYH. To preserve the integrity of the primitive, points stored
elsewhere will
not be considered.
A POLOOP can hold multiple LOOPTS elements, each LOOPTS being limited to a
maximum of 500 POINs. The order of points round a loop is in member list order of
each
LOOPTS in turn.
The INVIS logical array determines the visibility of edges. The points referenced
by this
array correspond to those referenced by the VXREFS array. If the INVIS pointer is
set to
False for any point (or, by default, is unset), the edge between that point and the
preceding
point will be visible; if set to True, the edge will be invisible.
Attributes:
Legal Owners:
POLOOP
4:216 12.0
Data Model Reference Manual
Legal Members:
None
A POIN referenced from a LOOPTS with the INVIS flag set to True behaves like an
IPOIN in
a POGO (see Polygon Element (POGON)).
Description:
This element can belong to a Polyhedron (or Ground Model) and is the definition of
a face of
the owning volume. The face is defined by positioning member points which define
its
boundary.
Attributes:
The sequence of points in the Member List must correspond to the anticlockwise
sequence
of points when the external face of the polygon is viewed.
Legal Owners:
GRDMODEL, POHEDRON
Legal Members:
POINT, IPOINT
4:217 12.0
Data Model Reference Manual
Description:
This free-form element can be built into any shape by assembling a number of member
Attributes:
Legal Owners:
Legal Members:
POGON
Note:
The POHE element does not represent a "solid" 3D entity: it simply defines a set of
face planes (the POGOs) which might (or might not) enclose a 3D volume. For a
more versatile primitive, see the Solid Polyhedron (POLYHE) element.
4:218
12.0
Data Model Reference Manual
Description:
Attributes:
Legal Owners:
Legal Members:
None
Description:
Attributes:
Legal Owners:
POLYHEDRON, NPOLYHEDRON
Legal Members:
POLOOP
Description:
The POLOOP represents a planar profile which defines all or part of the shape of a
Polyhedron Face (POLFAC). It is defined by a set of edges linking adjacent Point
(POIN)
elements, the latter being identified by references held in a Loop Points element
(LOOPTS)
owned by the POLOOP.
The order of the vertices (i.e. whether they are sequenced clockwise or
anticlockwise) is
significant. The order for a loop representing a positive polyhedron face is the
opposite to
that representing a negative polyhedron face. The LMIRR attribute determines
whether the
face points are read from start to end of the list, or in reverse. Reversing the
order changes
the loop from a positive outer boundary to a negative hole boundary, or vice versa.
By
default, points listed anticlockwise correspond to a positive boundary.
Attributes:
Legal Owners:
POLFACE
Legal Members:
LOOPTS
The directions clockwise and anticlockwise refer to the sense when looking from
outside of
the face into the polyhedron.
Description:
An administrative element which holds Point (POIN) members defining the vertices of
a
Solid Polyhedron (POLYHE) or Negative Polyhedron (NPOLYH).
Attributes:
Legal Owners:
POLYHEDRON, NPOLYHEDRON
4:220 12.0
Data Model Reference Manual
Legal Members:
POINT
Description:
POIN which lies on a common edge between two faces will be referenced more than
once
(one reference from the LOOPTS of each POLOOP which shares that POIN).
The intended use of this element is as a means of importing 3D-shape data into
DESIGN
from external (non-PDMS) sources, rather than for creating polyhedra directly
within
DESIGN. Such data would normally be read into DESIGN via a macro file generated
elsewhere. For this reason, there is no mechanism for creating Solid Polyhedra or
their
related elements from the DESIGN applicationware.
Attributes:
Legal Owners:
Legal Members:
POLPTLIST, POLFACE, NBOX, NPOLYHEDRON, NCYLINDER, NSLCYLINDER,
NSNOUT, NDISH, NCONE, NPYRAMID, NCTORUS, NRTORUS, NXTRUSION,
NREVOLUTION
4:221 12.0
Data Model Reference Manual
Attributes:
The origin of the Pyramid is at the mid-point of the line joining the mid-points of
the top and
bottom surfaces, and the Z-axis is normal to the top and bottom faces.
Legal Owners:
Legal Members:
4:222 12.0
Data Model Reference Manual
Description:
The Solid of Revolution represents any shape which can be generated by sweeping a
constant cross-section profile thought an angle about an axis. The profile is
represented by
a LOOP, in the same was as for an Extrusion, but in this case the profile is swept
about an
axis rather than along a linear path. The swept angle must but in the range -360 to
+360
degrees, 360 degrees giving a solid which is axially symmetrical.
Attributes:
Legal Owners:
Legal Members:
4:223 12.0
Data Model Reference Manual
Attributes:
The origin of the Rectangular Torus is at the centre of the circular arcs of radii
RINSI and
ROUTS, and is defined in the X-Y plane.
Legal Owners:
Legal Members:
4:224 12.0
Data Model Reference Manual
Attributes:
The origin of the Slope-bottom Cylinder is at the mid-point of the axis (mid-way
between P1
and P2) and the default orientation is with the axis on the Z-axis.
Legal Owners:
Legal Members:
4:225 12.0
Data Model Reference Manual
Attributes:
The origin of the Snout is at the mid-point of the line joining the centres of the
top and
bottom surfaces and the Z-axis is normal to the top and bottom surfaces.
Legal Owners:
Legal Members:
4:226 12.0
Data Model Reference Manual
Description:
This element allows a smooth curve (second order Bezier) to be drawn between two
points
in a line.
Attributes:
Legal Owners:
BOUNDARY, DRAWING
Legal Members:
None
Description:
Attributes:
Legal Owners:
LOOP
Legal Members:
None
4:227 12.0
Data Model Reference Manual
Attributes:
These are as for BOX, but note that the Zlength dimension must be the penetrating
dimension for a hole which breaks the surface of its owning primitive.
Legal Owners:
Legal Members:
None
4:228 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
Legal Members:
None
Attributes:
The origin of the NCircular Torus is at the centre of the circular arcs of radii
RINSI and
ROUTS, and is defined in the X-Y plane.
Legal Owners:
4:229 12.0
Data Model Reference Manual
Legal Members:
None
Attributes:
Legal Owners:
Legal Members:
None
4:230 12.0
Data Model Reference Manual
Attributes:
The origin of the NDish is at the centre of the base, and the Z-axis lies along the
normal to
the base.
Legal Owners:
Legal Members:
None
Description:
Each POLFAC is defined by one or more planar Polyhedron Loops (POLOOP). Each
POLOOP is defined by a sequence of vertex positions which are identified by means
of a
Loop Points element (LOOPTS). The LOOPTS comprises references to sets of Point
(POIN) elements held by administrative Polyhedron Point List (POLPTL) elements.
The intended use of this element is as a means of importing 3D-shape data into
DESIGN
from external (non-PDMS) sources, rather than for creating polyhedra directly
within
DESIGN. Such data would normally be read into DESIGN via a macro file generated
elsewhere. For this reason, there is no mechanism for creating Negative Polyhedra
or their
related elements from the DESIGN applicationware.
Attributes:
4:231 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
POLPTLIST, POLFACE
The Negative Polyhedron (NPOLYH) is identical to the Solid Polyhedron (POLYHE; see
Polyhedron Element (POLYHEDRON)) in principle, except that it is interpreted
geometrically as a hole rather than as a solid volume. See the entries following
the Solid
Polyhedron for details of its constituent elements.
Attributes:
The origin of the NPyramid is at the mid-point of the line joining the mid-points
of the top and
bottom surfaces, and the Z-axis is normal to the top and bottom faces.
Legal Owners:
EQUIPMENT, STRUCTURE, SUBEQUIPMENT, SUBSTRUCTURE, SCTN, STWALL,
PANEL, SCREED, FLOOR, GWALL, CYLINDER, SLCYLINDER, SNOUT, BOX,
4:232 12.0
Data Model Reference Manual
Legal Members:
None
Description:
The Negative Solid of Revolution represents any negative shape which can be
generated by
sweeping a constant cross-section profile through an angle about an axis. The
profile is
represented by a LOOP, in the same way as for a Negative Extrusion, but in this
case the
profile is swept about an axis rather than along a linear path. The swept angle
must be in the
range -360 to +360 degrees, 360 degrees giving a volume which is axially
symmetrical.
Attributes:
Legal Owners:
Legal Members:
LOOP
4:233 12.0
Data Model Reference Manual
Attributes:
The origin of the NRectangular Torus is at the centre of the circular arcs of radii
RINSI and
ROUTS, and is defined in the X-Y plane.
Legal Owners:
Legal Members:
None
Attributes:
The origin of the NSlope-bottom Cylinder is at the mid-point of the axis (mid-way
between
P1 and P2) and the default orientation is with the axis on the Z-axis.
Legal Owners:
Legal Members:
None
Attributes:
The origin of the NSnout is at the mid-point of the line joining the centres of the
top and
bottom surfaces and the Z-axis is normal to the top and bottom surfaces.
Legal Owners:
Legal Members:
None
4:235 12.0
Data Model Reference Manual
Description:
The NEGATIVE EXTRUSION can be used to represent any negative volume of uniform
cross-section. It is defined by sweeping a profile representing the negative
extrusion�s
shape (LOOP) through a given distance (equivalent to the extrusion thickness).
Attributes:
Legal Owners:
Legal Members:
LOOP, DDSE
4:236 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
Legal Members:
LOOP
Description:
For site layout features such as fences and roadways it will often be sufficient to
restrict
modelling to lines and arcs laid out on a surface. The BOUNDARY element allows this
Attributes:
SITE, ZONE
4:237 12.0
Data Model Reference Manual
Legal Members:
Description:
This point can be used as a reference position against which other elements are
located. It
is shown as a set of axes with a local North pointer.
Attributes:
Legal Owners:
ZONE
Legal Members:
None
4:238 12.0
Data Model Reference Manual
Description:
Basic shapes and features in the site can be represented by Ground Models. These
may be
natural occurrences like mounds or slopes. Each Ground Model element is built up in
Attributes:
Legal Owners:
SITE
Legal Members:
POGON, TEXT
Description:
Attributes:
4:239 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
None
Description:
This is a planar element that has special significance in piperouting (see Part 2
of the
DESIGN Reference Manual), but may be used as a general reference plane. See Part 2
of
the DESIGN Reference Manual for more information about routing planes in Pipe
routing
and in Steelwork Structures.
Attributes:
4:240 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
None
Description:
The RPLG is a grouping element whose members may be Steelwork RPLANEs (see next
entry), as opposed to the Piping RPLANEs described in Routing Plane Element
(RPLANE).
Attributes:
Legal Owners:
STRUCTURE
Legal Members:
RPLANE
4:241 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
VOLMODEL
Legal Members:
Attributes:
Legal Owners:
ZONE
4:242 12.0
Data Model Reference Manual
Legal Members:
Attributes:
Legal Owners:
RLST
Legal Members:
None
Attributes:
Legal Owners:
RLWLD
Legal Members:
GRULE
4:243 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
WORLD
Legal Members:
RLST
Attributes:
Legal Owners:
CYMWRL
Legal Members:
CYMLNK
Attributes:
Legal Owners:
CYMGRP, CYMLNK
Legal Members:
CYMLNK
4:244 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
WORLD
Legal Members:
CYMGRP
Attributes:
4:245 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
Attributes:
Legal Owners:
Legal Members:
4:246 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
Legal Members:
Attributes:
4:247 12.0
Data Model Reference Manual
Legal Owners:
STRFLT
Legal Members:
Attributes:
Legal Owners:
STRUCTURE, STRWELL
Legal Members:
4:248 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
STRFLT, TREADSET
Legal Members:
Attributes:
Legal Owners:
STRFLT
Legal Members:
TREAD, DDSE
4:249 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
STRTWR
Legal Members:
GENSEC, PANEL
Description:
The LCDE element allows you to supply a detailed description of the types of
loading case
that are to be considered as being applied during stress analysis of the Structure.
Any
element without a LCDE will be ignored during stress analysis.
Attributes:
Legal Owners:
STRUCTURE
Legal Members:
None
Description:
The NODI element allows you to apply directional or rotational displacement results
or
preconditions to a Structure. The displacements are specified relative to a locally
defined
axis system.
4:250 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
Legal Members:
None
Description:
The NOLO element is used to apply forces or moments to its owning Node. The forces
and
moments are specified relative to a locally defined axis system (LAXES).
Attributes:
Legal Owners:
Legal Members:
None
Description:
The RELE element is used to define how a stressed structure may flex under the
influence
of applied forces or moments. Its attribute settings control both directional and
rotational
movement at its owning Node. The Release directions are specified relative to a
locally
defined axis system.
4:251 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
Legal Members:
None
Description:
The SDLO element allows you to apply forces or moments distributed over a specified
Attributes:
Legal Owners:
Legal Members:
None
4:252 12.0
Data Model Reference Manual
Description:
The SPLO element allows you to apply forces or moments at given points on the
Neutral
Axis of a Section. The forces and moments are specified relative to the axis system
of the
parent Structure.
Attributes:
Legal Owners:
Legal Members:
None
Attributes:
Supref SUPREF
Orrf Origin reference (for templates)
Stmf Template selection pointer
Legal Owners:
FRMWORK
Legal Members:
PNODE, SCTN, PANEL, TEXT, PALJOINT, FIXING, TMPLATE, DPSET, DDSE, GENSEC,
FLOOR, SCREED
Description:
A CMFI can be used to represent a penetration at which one or more elements (Pipes
or
Sections) pass through a hole in a Section. The position of each individual
penetrating item
is represented by a Subfitting (SBFI) element owned by the CMFI; the CMFI is
primarily an
administrative element used to position a group of SBFI. A CMFI is positioned along
the Z
axis of its owning Section, in the same way as a Secondary Node.
Attributes:
4:254 12.0
Data Model Reference Manual
Legal Owners:
SCTN, STWALL
Legal Members:
Description:
A CMPF can be used to represent a penetration at which one or more elements (Pipes
or
Sections) pass through a hole in a Panel. The position of each individual
penetrating item is
represented by a Subfitting (SBFI) element owned by the CMPF; the CMPF is primarily
an
administrative element used to position a group of SBFIs.
Attributes:
4:255 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
Description:
A PANEL COFITTING is used where a fitting or penetration spans the junction between
two
or more panels. One panel owns a PFIT, while the others each own a COFI. Each COFI
refers back to the associated PFIT via its PFRE(PFIT Reference attribute).
Attributes:
Legal Owners:
Legal Members:
None
Attributes:
Legal Owners:
GENSEC, WALL
Legal Members:
None
4:256 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
FRMWORK
Legal Members:
Description:
A CURVE element defines a segment of a Spine path. It defines the geometry of the
Spine
between the POINSPs either side of it in the members list.
Attributes:
Legal Owners:
RPATH, SPINE
Legal Members:
None
Attributes:
Legal Owners:
FRMWORK
Legal Members:
PNODE, SCTN, PANEL, TEXT, PALJOINT, FIXING, TMPLATE, DPSET, DDSE, GENSEC,
WALL, STWALL, GWALL
4:258 12.0
Data Model Reference Manual
Description:
A FITT can be used to represent any item which is attached to the Structure but
which does
not form an integral part of it. It may be used to indicate such things as the
presence of a
connected implied load, such as a pipe hanger attachment, or an ancillary item such
as a
web stiffener or a flange plate.
A FITT is positioned along the Z axis of its owning Section, in the same way as a
Secondary
Node.
Attributes:
Legal Owners:
SCTN, STWALL
Legal Members:
4:259 12.0
Data Model Reference Manual
Description:
Attributes:
Legal Owners:
Legal Members:
Attributes:
Legal Owners:
Legal Members:
Description:
The FRMW element provides a convenient administrative element for structural design
modelling. A number of the attributes set at FRMW level will cascade down through
the
design hierarchy as member elements are created during the steelwork design
process.
4:261 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
STRUCTURE
Legal Members:
Description:
4:262 12.0
Data Model Reference Manual
Attributes:
4:263 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
Attributes:
4:264 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
Description:
Defines the frame of reference for its member PLDATUM elements based on the pline
system of its owning GENSEC. (Replaces the function of the SNODE used by SCTNs.)
Attributes:
Legal Owners:
GENSEC, WALL
Legal Members:
PLDATUM
4:265 12.0
Data Model Reference Manual
Description:
The Equipment LOAP element provides a link between an Equipment item and a
Steelwork
Structural item. The CREF attribute of a LOAP and the CREF attribute of a Fitting
may point
to each other to indicate interconnection between them.
Attributes:
Legal Owners:
Legal Members:
Description:
A Panel Linear Joint is used to connect two Panels together. The start and end of
the PALJ
are defined by two Panel Vertex (PAVE) points. Logical connections from the
attached Panel
are made by setting Master Vertex (MVERT) attributes of two of the Panel�s PAVEs to
point
to the corresponding PAVEs on the linear joint.
Attributes:
4:266 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
PAVERT
Description:
The PANEL element is used to represent sheet materials (walls, floors, decking,
etc.) used
to clad the structure. It is defined by sweeping a profile representing the panel's
shape (the
Panel Loop. PLOOP) through a given distance (equivalent to the panel thickness)-
see
Figure 4:42.: Defining a PANE.
Attributes:
Legal Owners:
Legal Members:
Description:
A PAVE element defines each vertex of a Panel Loop or each connected end of a Panel
Linear Joint.
Attributes:
4:268 12.0
Data Model Reference Manual
Legal Owners:
PALJOINT, PLOOP
Legal Members:
Description:
The Primary Compound Joint is used where two or more attached sections are
connected at
a common Primary Node (representing, for example, a gusset plate). It owns a
separate
SubJoint for each connection.
Attributes:
Legal Owners:
PNODE
Legal Members:
4:269 12.0
Data Model Reference Manual
Description:
A PANEL FITTING can be used to represent any item which is attached to a Panel. It
may
be used to indicate such things as the presence of a penetrating item or an
ancillary item
such as an inspection cover, doorway etc.
Attributes:
Legal Owners:
Legal Members:
Description:
The PJOINT is used to make a logical connection between a Section's start or end
and a
Primary Node. Its position is defined relative to that of a PNOD (cf. SJOINT
element). It
allows you to model indirectly, physical connections between Sections.
Attributes:
Legal Owners:
PNODE
Legal Members:
4:271 12.0
Data Model Reference Manual
Description:
Defines the frame of reference for its members based on the nominated pline (POSL)
system of its owning JLDATUM. Used to position Fixings, Joints or Fittings along a
GENSEC.
Attributes:
Legal Owners:
JLDATUM
Legal Members:
Description:
The PLOOP represents a 2D profile which defines the shape of a Panel. It is defined
as a
set of edges linking adjacent points represented by Panel Vertex (PAVE) elements.
Attributes:
Legal Owners:
PAVERT
4:272 12.0
Data Model Reference Manual
Description:
Attributes:
Legal Owners:
Legal Members:
Description:
A POINSP element defines the start and end of a Spine path, and any location along
the
path at which there is a change of direction.
Attributes:
Legal Owners:
SPINE
4:273 12.0
Data Model Reference Manual
Legal Members:
None
Description:
A SBFI can represent a single penetration at which a Pipe or Section passes through
a hole
in a Panel or Section. Multiple penetrations are represented by a group of SBFIs
(one for
each penetrating item) owned by a common Compound Fitting (CMFI) or Compound Panel
Fitting (CMPF) element.
Attributes:
Legal Owners:
CMFITTING, CMPFITTING
Legal Members:
Description:
The SBFR element allows you to further subdivide a FRMW into more manageable
administrative portions for structural design modelling. As for FRMW, some
attribute
settings will cascade down to member elements.
Attributes:
Legal Owners:
FRMWORK
Legal Members:
PNODE, SCTN, PANEL, TEXT, PALJOINT, FIXING, TMPLATE, DPSET, DDSE, GENSEC,
WALL, STWALL, GWALL, FLOOR, SCREED
Description:
The Secondary Compound Joint is used where two or more attached sections are
connected at a common Secondary Node (representing, for example, a gusset plate).
It
owns a separate SubJoint for each connection.
4:275 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
SNODE
Legal Members:
Attributes:
Legal Owners:
Legal Members:
Description:
A SCTN represents a linear component such as a beam, column, strut etc. It has a
uniform
cross-section along its length, defined by reference to a Catalogue PROFILE
element, while
its length is a derived property (not stored in an attribute) which is determined
by the
Section�s start and end positions.
Attributes:
4:277 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
Description:
A Section Linear Joint is used to connect a Panel to a Section. The start and end
of the
SELJ are defined by two Section Vertex (SEVE) points. Logical connections from the
attached Panel are made by setting Master Vertex (MVERT) attributes of two of the
Panel's
PAVEs to point to the corresponding SEVEs on the linear joint.
Attributes:
4:278 12.0
Data Model Reference Manual
Legal Owners:
SCTN, STWALL
Legal Members:
SEVERT
Description:
Attributes:
Legal Owners:
SELJOINT
Legal Members:
None
4:279 12.0
Data Model Reference Manual
Description:
The SJOINT element is used to make a logical connection between two Sections in an
interconnected steelwork structure. Its position is defined relative to that of a
SNOD (cf.
PJOINT element).
Attributes:
Legal Owners:
SNODE
Legal Members:
4:280 12.0
Data Model Reference Manual
Description:
Attributes:
Legal Owners:
SCTN, STWALL
Legal Members:
Description:
A SPINE defines the path through which a cross-sectional Profile must be swept to
generate
a GENSEC. The route of the Spine is defined by a sequence of Spine Points(POINSP):
one
at the start, one at the end, and one at each change of direction. Each segment
linking
adjacent Spine Points can be either a straight line or an arc of a circle: the
latter is achieved
by the insertion of a CURVE element (see Curve (on Spine) Element (CURVE)).
Attributes:
4:281 12.0
Data Model Reference Manual
Legal Owners:
GENSEC, WALL
Legal Members:
POINSP, CURVE
Description:
The structural framework of the plant (for example, buildings, pipe racks,
equipment racks)
can be modelled on a simple level using the same basic set of primitive shapes
available for
Equipment (the main difference being that such elements cannot own Nozzles).
The principal feature of the STRUCTURE element is its ability to own SUBSTRUCTURES
as well as primitive shapes, Routing Planes and Penalty Volumes. This enables, say,
a rack
to be further divided into beams and columns. (See also Structure Element
(STRUCTURE)
for the use of this element in designing Steelwork Structures.)
Attributes:
Legal Owners:
ZONE
Legal Members:
4:282 12.0
Data Model Reference Manual
Attributes:
4:283 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
Description:
Attributes:
Legal Owners:
PCOJOINT, SCOJOINT
4:284 12.0
Data Model Reference Manual
Legal Members:
Description:
Minor structural elements such as beams, columns, walls, ladders and staircases can
be
modelled with the standard set of basic primitive shapes within a SUBSTRUCTURE
element.
Attributes:
Legal Owners:
STRUCTURE
Legal Members:
4:285 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
Legal Members:
4:286 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
SYGPWL, SYGPAR
Legal Members:
SYSGRP, SYGPAR
Attributes:
Legal Owners:
WORLD
Legal Members:
SYGPAR
Attributes:
Legal Owners:
SYSGRP
Legal Members:
None
Attributes:
Legal Owners:
SYGPAR, SYSGRP
Legal Members:
Attributes:
Legal Owners:
SYSGRP
Legal Members:
DDSE
4:288 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
APPLDWORLD, APPDAREA
Legal Members:
APPLDATA, APPDAREA
Attributes:
Legal Owners:
APPDAREA
Legal Members:
Attributes:
Legal Owners:
WORLD
Legal Members:
APPDAREA, DDAREA
Attributes:
Legal Owners:
TPWLD
Legal Members:
TMPLATE
Attributes:
Legal Owners:
Legal Members:
SCTN, PANEL, PNODE, DPSET, DDSE, TMRPSET, GENSEC, WALL, STWALL, GWALL,
FLOOR, SCREED, CYLINDER, SLCYLINDER, SNOUT, BOX, POLYHEDRON, DISH,
CONE, PYRAMID, CTORUS, RTORUS, EXTRUSION, REVOLUTION, POHEDRON,
NOZZLE, NCYLINDER, NSLCYLINDER, NSNOUT, NBOX, NPOLYHEDRON, NDISH,
NCONE, NPYRAMID, NCTORUS, NRTORUS, NXTRUSION, NREVOLUTION, TEXT,
ELCONN
Attributes:
Legal Owners:
TMPLATE
Legal Members:
TMRRELEMENT
Description:
The REXE command scans for TMRREL elements and when one is found carries out the
following actions:
1.
Evaluate TMRRUL to find how many repeat elements required.
2.
Evaluate TMRXRE to find how many repeat items currently exist.
3.
If there are too few repeat elements, use TMRMAS and TMROWN to create and copy
new repeat elements. The REPCOU attribute will be set to the lowest unique value.
4:291
12.0
Data Model Reference Manual
4.
If there are too many then delete the surplus. The REPCOU attribute is used find
which
elements to delete, providing the values have not been modified then the elements
with
the highest values of REPCOU will be deleted.
5.
Execute any rules owned by the repeat elements. Note that any rules which apply to
position and orientation attributes may be overwritten by transforms applied by the
If OFFTYP equals RADI then rotate repeat items about an axis defined by AXIDIS and
AXIDIR by an angle DELANG with an optional offset in the direction of the axis
(OFFDIS).
4:292
12.0
Data Model Reference Manual
The flag RORIEN is true if the repeat elements are orientated as well as shifted.
Attributes:
Name Name of the element
Description
Function
Description
Function
Purpose
Tmrrule
Description code word
Template Repeat Rule
Tmrmaster Template Repeat Master Duplicate Element
Tmrowner Template Repeat Owning Element
Orrf Origin reference (for templates)
OffType
DeltaEast
Offset type: DELTA, LINEAR, RADIAL
Easterly Offset applied to repeat elements
DeltaNorth Northerly Offset applied to repeat elements
4:293 12.0
Data Model Reference Manual
Legal Owners:
TMRPSET
Legal Members:
None
Attributes:
Legal Owners:
WORLD
Legal Members:
TMAREA, DDAREA
4:294 12.0
Data Model Reference Manual
5.1 Introduction
This chapter shows the elements within the Dictionary Database.
Legal Owners:
UWRLD, UGROUP
Legal Members:
ULIMIT, UVALID
5:1 12.0
Data Model Reference Manual
Legal Owners:
UDETWL, UDETGR
Legal Members:
None
Legal Owners:
UDETWL
Legal Members:
UDET
Legal Owners:
WORLD
Legal Members:
UDETGR, UDET
5:2 12.0
Data Model Reference Manual
Legal Owners:
UWRLD
Legal Members:
UDA, USDA
Legal Owners:
UDA, USDA
Legal Members:
None
Legal Owners:
UGROUP
Legal Members:
ULIMIT, UVALID
5:3 12.0
Data Model Reference Manual
Legal Owners:
UDA, USDA
Legal Members:
None
Legal Owners:
WORLD
Legal Members:
UGROUP, UDA
Description:
The WORLD is the topmost level of the design hierarchy within which all other
elements
exist. It cannot be deleted or copied in the same way that applies to say, a ZONE
or a BOX.
Its existence is controlled outside DESIGN by the ADMINISTRATION module of PDMS.
Attributes:
Legal Owners:
None
Legal Members:
UWRLD, UDETWL
5:4 12.0
Data Model Reference Manual
6.1 Introduction
This chapter shows the elements within the Draft Database.
Legal Owners:
CRST
Legal Members:
None
Legal Owners:
RPLB
Legal Members:
None
6:1 12.0
Data Model Reference Manual
Legal Owners:
IDLIST
Legal Members:
None
6:2 12.0
Data Model Reference Manual
Legal Owners:
LAYER
Legal Members:
6:3 12.0
Data Model Reference Manual
Legal Owners:
ADIMENSION
Legal Members:
None
6:4 12.0
Data Model Reference Manual
Legal Owners:
ADIMENSION
Legal Members:
None
Legal Owners:
Legal Members:
None
6:5 12.0
Data Model Reference Manual
Legal Owners:
LAYER
Legal Members:
None
Attributes:
Legal Owners:
SHLB
Legal Members:
NOTE
6:6 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
None
Legal Owners:
CLLB, CIRLIST
Legal Members:
CIRLIST, RECIPIENT
Attributes:
Legal Owners:
LIBY
Legal Members:
CIRLIST
6:7 12.0
Data Model Reference Manual
Legal Owners:
RPLB
Legal Members:
DCRULE, ACRULE
Legal Owners:
CRST
Legal Members:
None
6:8 12.0
Data Model Reference Manual
Legal Owners:
RPLB
Legal Members:
None
Attributes:
6:9 12.0
Data Model Reference Manual
Legal Owners:
WORLD
Legal Members:
REGISTRY, LIBY
6:10 12.0
Data Model Reference Manual
Legal Owners:
DSLAYER
Legal Members:
None
Legal Owners:
6:11 12.0
Data Model Reference Manual
Legal Members:
None
Attributes:
Legal Owners:
LIBY
Legal Members:
IDLIST
Legal Owners:
LDIMENSION
Legal Members:
None
6:13 12.0
Data Model Reference Manual
Legal Owners:
ADIMENSION, LDIMENSION
Legal Members:
None
Legal Owners:
ADIMENSION, LDIMENSION
6:14 12.0
Data Model Reference Manual
Legal Members:
None
6:15 12.0
Data Model Reference Manual
Legal Owners:
LIBY
Legal Members:
DRTMPL
Attributes:
6:16 12.0
Data Model Reference Manual
Legal Owners:
DRTMLB
Legal Members:
Attributes:
6:17 12.0
Data Model Reference Manual
Legal Owners:
REGISTRY
Legal Members:
6:18 12.0
Data Model Reference Manual
6:19 12.0
Data Model Reference Manual
Legal Owners:
VIEW
Legal Members:
DESSYMBOL
Legal Owners:
Legal Members:
None
6:20 12.0
Data Model Reference Manual
Adegrees Orientation
Fradius Fillet radius
NLStyle Note linestyle
NLColour Note colour
FStyle Fill style
FColour Fill colour
ACDATE Date last modified in AutoCAD
ACLock AutoCAD picture lock
Legal Owners:
Legal Members:
None
Legal Owners:
FSTYTB
Legal Members:
HPATTERN
Legal Owners:
PLLB
Legal Members:
None
6:21 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
STYLWL
Legal Members:
FILLSTYLE
6:22 12.0
Data Model Reference Manual
Legal Owners:
LAYER
Legal Members:
None
Legal Owners:
GLYPH
Legal Members:
None
Legal Owners:
GLYPH
Legal Members:
None
6:23 12.0
Data Model Reference Manual
Legal Owners:
GLYTB
Legal Members:
Legal Owners:
GLYPH
Legal Members:
None
Attributes:
Legal Owners:
STYLWL
Legal Members:
GLYPH
6:24 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
None
Legal Owners:
FILLSTYLE
Legal Members:
None
6:25 12.0
Data Model Reference Manual
Legal Owners:
RPLB
Legal Members:
HRULE
Legal Owners:
HRST, VIEW
Legal Members:
None
Legal Owners:
RPLB
Legal Members:
None
6:26 12.0
Data Model Reference Manual
6:27 12.0
Data Model Reference Manual
Legal Owners:
VIEW
Legal Members:
None
6:28 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
DLLB
Legal Members:
ADDENTRY, REMENTRY
Attributes:
Legal Owners:
LIBY
Legal Members:
ISOTM
6:29 12.0
Data Model Reference Manual
STRAIGHT, MARKPRIMITIVE
6:30 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
LIBY
Legal Members:
TXTM, SYTM
6:31 12.0
Data Model Reference Manual
Legal Owners:
LAYTBL
Legal Members:
None
6:32 12.0
Data Model Reference Manual
Legal Owners:
VIEW
Legal Members:
6:33 12.0
Data Model Reference Manual
Legal Owners:
RPLB
Legal Members:
LAYRUL
Legal Owners:
LAYRST
Legal Members:
None
Legal Owners:
RPLB
Legal Members:
LAYDEF
6:34 12.0
Data Model Reference Manual
6:35 12.0
Data Model Reference Manual
6:36 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
CLLB, DLLB, RPLB, PLLB, TRLB, SYLB, ISOLB, LALB, SHLB, DRTMLB, TASKLB,
SDAOPT
Legal Owners:
LSTYTB
Legal Members:
OLINESTYLE
Attributes:
Legal Owners:
STYLWL
Legal Members:
LINESTYLE
6:37 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
None
Legal Owners:
MSTYTB
Legal Members:
None
Attributes:
Legal Owners:
STYLWL
Legal Members:
MARKSTYLE
6:38 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
6:39 12.0
Data Model Reference Manual
Legal Owners:
SHEET, SHTMPL
Legal Members:
None
Legal Owners:
LINESTYLE
Legal Members:
None
6:40 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
VRTX
Attributes:
6:41 12.0
Data Model Reference Manual
Legal Owners:
SHLB
Legal Members:
VIEW, NOTE
6:42 12.0
Data Model Reference Manual
Legal Owners:
LAYER
Legal Members:
RPOINT, RPPT
Attributes:
Legal Owners:
LIBY, SHEET
Legal Members:
Legal Owners:
PLLB
Legal Members:
None
6:43 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
None
Attributes:
Legal Owners:
WORLD
Legal Members:
None
6:44 12.0
Data Model Reference Manual
Legal Owners:
LAYER
Legal Members:
None
6:45 12.0
Data Model Reference Manual
Legal Owners:
CIRLIST
Legal Members:
None
Legal Owners:
Legal Members:
None
Attributes:
6:46 12.0
Data Model Reference Manual
Legal Owners:
DEPT
Legal Members:
Legal Owners:
IDLIST
6:47 12.0
Data Model Reference Manual
Legal Members:
None
Legal Owners:
REGISTRY
Legal Members:
TEXT
Legal Owners:
Legal Members:
TEXT
6:48 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
LIBY
Legal Members:
Legal Owners:
PDIMENSION
Legal Members:
None
Legal Owners:
PDIMENSION
Legal Members:
None
6:49 12.0
Data Model Reference Manual
Legal Owners:
RPLB
Legal Members:
RRULE
Legal Owners:
RRST, VIEW
Legal Members:
None
6:50 12.0
Data Model Reference Manual
Legal Owners:
LIBY
Legal Members:
None
Attributes:
Legal Owners:
DRWG
Legal Members:
6:51 12.0
Data Model Reference Manual
BACKINGSHEET, OVERLAY
6:52 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
DRTMPL
Legal Members:
6:53 12.0
Data Model Reference Manual
Legal Owners:
LAYER
Legal Members:
None
Legal Owners:
PLLB
Legal Members:
WPOS
6:54 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
None
6:55 12.0
Data Model Reference Manual
Legal Owners:
RPLB
Legal Members:
None
Attributes:
Legal Owners:
WORLD
Legal Members:
Attributes:
6:56 12.0
Data Model Reference Manual
Legal Owners:
LIBY
Legal Members:
SYTM
Legal Owners:
Legal Members:
None
6:57 12.0
Data Model Reference Manual
Legal Owners:
SYLB, LALB
Legal Members:
6:58 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
None
Legal Owners:
LAYER, TRST
Legal Members:
None
Legal Owners:
Legal Members:
TKPARA
Attributes:
6:59 12.0
Data Model Reference Manual
Legal Owners:
LIBY
Legal Members:
TASK
Description:
TEXT is a general element that can occupy most positions in the hierarchy. It can
be used to
store additional information about an owning or adjacent element.
Attributes:
Legal Owners:
REPORT, REVISION
Legal Members:
None
Legal Owners:
SYTM, NOTE, VNOTE
6:60 12.0
Data Model Reference Manual
Legal Members:
None
Legal Owners:
TASK
Legal Members:
None
Attributes:
Legal Owners:
LIBY
Legal Members:
TRST
Legal Owners:
TRLB
Legal Members:
TAGRULE
6:61 12.0
Data Model Reference Manual
6:62 12.0
Data Model Reference Manual
ADP
Dfltb Defaults for Type 2 annotation - special attribute for use by
ADP
Dfltc Defaults for Type 3 annotation - special attribute for use by
ADP
Vnref VNOTE reference -special attribute for use by ADP
VCompDate View Comparison Date
VCompStamp View Comparison Stamp
Posformat Intelligent Text positional code word expansion style
Grsystem Grid system reference
SpPurpose Special purpose table attribute
ACLock AutoCAD picture lock
Legal Owners:
Legal Members:
Legal Owners:
VMSUBV
Legal Members:
None
6:63 12.0
Data Model Reference Manual
Legal Owners:
VIEW
Legal Members:
VMCOMP
6:64 12.0
Data Model Reference Manual
Legal Owners:
LAYER
Legal Members:
Legal Owners:
OUTLINE
Legal Members:
None
Legal Owners:
VIEW
Legal Members:
None
6:65 12.0
Data Model Reference Manual
Description:
The WORLD is the topmost level of the design hierarchy within which all other
elements
exist. It cannot be deleted or copied in the same way that applies to say, a ZONE
or a BOX.
Its existence is controlled outside DESIGN by the ADMINISTRATION module of PDMS.
Attributes:
Legal Owners:
None
Legal Members:
Legal Owners:
SPLANE
Legal Members:
None
6:66 12.0
Data Model Reference Manual
7
Elements in the Global Database
7.1
Introduction
This chapter shows the elements within the Global Database.
7.1.1
Database Element (DB)
Primary Element
Attributes:
Numbdb DB number
Stype SPECON type question
Fino File number
Area Area
CRCY Concurrency
Daccess Database access
Claim Claim mode
Description Description
Projid PROJID - on the DB element
Fcpyref Forward copy reference
Bcpyref Backward copy reference
ExtNo Extract number
ExtOwner Extract owner
LVariant Variant Flag
LCtrolled Controlled DB Flag
Name Name of the element
Legal Owners:
DBLI
Legal Members:
DBLOC
7.1.2
Global List of DBs Allocated to Location Element (DBALL)
Attributes:
DeAlAll
True if location locked due to deallocation of dbs
7:1
12.0
Data Model Reference Manual
Legal Owners:
LOC
Legal Members:
DB
Attributes:
Legal Owners:
TEAM
Legal Members:
DB
Attributes:
Legal Owners:
DB
Legal Members:
None
Attributes:
7:2 12.0
Data Model Reference Manual
Legal Owners:
WORLD
Legal Members:
Attributes:
Legal Owners:
WORLD
Legal Members:
ROLE
Legal Owners:
GRPLI
Legal Members:
None
Attributes:
Legal Owners:
GLOCWL
Legal Members:
GRP
7:3 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
WORLD
Legal Members:
None
Attributes:
Legal Owners:
WORLD
Legal Members:
STAMP
Attributes:
Legal Owners:
WORLD
Legal Members:
TEAM
7:4 12.0
Data Model Reference Manual
Legal Owners:
LNKLI
Legal Members:
None
Attributes:
Legal Owners:
GLOCWL
Legal Members:
LNK
Attributes:
7:5 12.0
Data Model Reference Manual
Legal Owners:
LOCLI
Legal Members:
DBALL
Attributes:
Legal Owners:
GLOCWL
Legal Members:
LOC
Legal Owners:
ROLE
Legal Members:
None
7:6 12.0
Data Model Reference Manual
Legal Owners:
GROLWL
Legal Members:
PEROP
Attributes:
Legal Owners:
GSTWLD
Legal Members:
STLST
Legal Owners:
STAMP
Legal Members:
None
7:7 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
GTMWL
Legal Members:
DBLI
Description:
The WORLD is the topmost level of the design hierarchy within which all other
elements
exist. It cannot be deleted or copied in the same way that applies to say, a ZONE
or a BOX.
Its existence is controlled outside DESIGN by the ADMINISTRATION module of PDMS.
Attributes:
Legal Owners:
None
Legal Members:
7:8 12.0
Data Model Reference Manual
8.1 Introduction
This chapter shows the elements within the Manu Database.
Attributes:
Legal Owners:
CPINRW
Legal Members:
None
Attributes:
8:1 12.0
Data Model Reference Manual
Legal Owners:
CPINJG
Legal Members:
None
Attributes:
Legal Owners:
MPANEL
Legal Members:
CPINCR, CPINRW
Attributes:
Legal Owners:
CPINJG
Legal Members:
CPIN
8:2 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
MNSTTH
Legal Members:
Attributes:
Legal Owners:
WORLD
Legal Members:
MPANEL
8:3 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
MPANEL
Legal Members:
MPLATE, MPROF
Attributes:
Legal Owners:
MAPLNS, MPLNST
Legal Members:
None
Attributes:
8:4 12.0
Data Model Reference Manual
TBID Tribon ID
PunchT Punching time
Totalt Total machine time for a nested plate
WatTim Water cleaning time
Legal Owners:
MAPLNS, MPLNST
Legal Members:
Attributes:
Legal Owners:
MAPLNS, MPLNST
Legal Members:
None
Attributes:
Legal Owners:
MPRNST
8:5 12.0
Data Model Reference Manual
Legal Members:
None
Attributes:
Legal Owners:
MPLNST
Legal Members:
None
Attributes:
Legal Owners:
MAPLNS, MPLNST
Legal Members:
None
8:6 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
MAPLNS, MPLNST
Legal Members:
None
Attributes:
Legal Owners:
WORLD
Legal Members:
MNSTTH
Attributes:
Legal Owners:
MNSTQU
Legal Members:
MPLNST, MAPLNS
Attributes:
Legal Owners:
MAPLNS, MPLNST
Legal Members:
Attributes:
Legal Owners:
MBLOCK
Legal Members:
8:8 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
MBPRO, MPANEL
8:9 12.0
Data Model Reference Manual
Legal Members:
None
Attributes:
Legal Owners:
MNSTTH
Legal Members:
Attributes:
Legal Owners:
MRAWTH
Legal Members:
None
Attributes:
Legal Owners:
MAPLNS, MPLNST
Legal Members:
None
8:11 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
WORLD
Legal Members:
MNPROF
Attributes:
Legal Owners:
MBPRO, MPANEL
Legal Members:
None
Attributes:
Legal Owners:
MNPATH
Legal Members:
None
Attributes:
8:13 12.0
Data Model Reference Manual
Legal Owners:
MNPATH
Legal Members:
None
Attributes:
Legal Owners:
MNPATH
Legal Members:
MPTFCI
Attributes:
8:14 12.0
Data Model Reference Manual
Legal Owners:
MPTFAC
Legal Members:
None
Attributes:
Legal Owners:
MNPATH
Legal Members:
None
Attributes:
Legal Owners:
MNPATH
Legal Members:
None
8:15 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
MNPATH
Legal Members:
None
Attributes:
Legal Owners:
WORLD
Legal Members:
MRAWTH
Attributes:
Legal Owners:
MRAWQU
8:16 12.0
Data Model Reference Manual
Legal Members:
MPLRAW
Attributes:
Legal Owners:
MRESTQ
Legal Members:
MRPLA
Attributes:
Legal Owners:
WORLD
Legal Members:
MRESTH
Attributes:
8:17 12.0
Data Model Reference Manual
Legal Owners:
MRESTH
Legal Members:
None
Attributes:
Legal Owners:
MNTOOL
Legal Members:
None
Attributes:
8:18 12.0
Data Model Reference Manual
Legal Owners:
MNTOOL
Legal Members:
None
Attributes:
Legal Owners:
MNTOOL
Legal Members:
None
Attributes:
Legal Owners:
MNTOOL
Legal Members:
None
8:19 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
MNTOOL
Legal Members:
None
Description:
The WORLD is the topmost level of the design hierarchy within which all other
elements
exist. It cannot be deleted or copied in the same way that applies to say, a ZONE
or a BOX.
Its existence is controlled outside DESIGN by the ADMINISTRATION module of PDMS.
Attributes:
Legal Owners:
None
Legal Members:
8:20 12.0
Data Model Reference Manual
9.1 Introduction
This chapter shows the elements within the Property Database.
Legal Owners:
CMPTYPE
Legal Members:
None
Legal Owners:
RUNDECK
9:1 12.0
Data Model Reference Manual
Legal Members:
None
Legal Owners:
CASWORLD
Legal Members:
None
Legal Owners:
CASWORLD
Legal Members:
CASE
Legal Owners:
WORLD
Legal Members:
CASE, CASTYPE
9:2 12.0
Data Model Reference Manual
Legal Owners:
CMPTYPE
Legal Members:
None
Legal Owners:
CMPWORLD
Legal Members:
9:3 12.0
Data Model Reference Manual
Legal Owners:
WORLD
Legal Members:
CMPTYPE
Legal Owners:
CONWORLD, CONTYPE
Legal Members:
TCASE
Legal Owners:
CONWORLD
9:4 12.0
Data Model Reference Manual
Legal Members:
CONSTRAINT
Legal Owners:
WORLD
Legal Members:
CONTYPE, CONSTRAINT
Legal Owners:
MATWORLD
Legal Members:
Description:
This is a subsidiary World that contains only GROUPs and is owned by the main WORLD
element.
Attributes:
Legal Owners:
WORLD
Legal Members:
GROUP
9:5 12.0
Data Model Reference Manual
Description:
You may define as a GROUP any collection of elements in the database, assembling
these
elements as a single GROUP unit.
Attributes:
Legal Owners:
GPWLD
Legal Members:
None
Legal Owners:
WORLD
Legal Members:
SOLID, FLUID
Legal Owners:
RUNWORLD
Legal Members:
CARD
9:6 12.0
Data Model Reference Manual
Legal Owners:
WORLD
Legal Members:
RUNDECK
Legal Owners:
TAPROPERTY
Legal Members:
None
Legal Owners:
TBPROPERTY
Legal Members:
None
Legal Owners:
TCPROPERTY
Legal Members:
None
9.1.21
Spot Density Temperature and Pressure Element (SDENSITY)
Attributes:
Legal Owners:
TDENSITY
Legal Members:
None
9.1.22
Spot Expansion Coefficient Temperature and Pressure Element
(SEXPANSION)
Attributes:
Legal Owners:
TEXPANSION
Legal Members:
None
9.1.23
Solid Material Element (SOLID)
Attributes:
Legal Owners:
MATWORLD
9:8
12.0
Data Model Reference Manual
Legal Members:
Legal Owners:
TPOISSON
Legal Members:
None
Legal Owners:
TSTRESS
Legal Members:
None
Legal Owners:
TYOUNG
Legal Members:
None
9:9 12.0
Data Model Reference Manual
Legal Owners:
SOLID, FLUID
Legal Members:
SAPROPERTY
Legal Owners:
SOLID, FLUID
Legal Members:
SBPROPERTY
Legal Owners:
CONSTRAINT
Legal Members:
None
9:10 12.0
Data Model Reference Manual
Legal Owners:
SOLID, FLUID
Legal Members:
SCPROPERTY
Legal Owners:
SOLID, FLUID
Legal Members:
SDENSITY
Legal Owners:
SOLID, FLUID
Legal Members:
SEXPANSION
Description:
TEXT is a general element that can occupy most positions in the hierarchy. It can
be used to
store additional information about an owning or adjacent element.
9:11 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
SOLID, FLUID
Legal Members:
None
Legal Owners:
SOLID
Legal Members:
SPOISSON
Legal Owners:
SOLID
Legal Members:
SSTRESS
9:12 12.0
Data Model Reference Manual
Legal Owners:
CMPTYPE
Legal Members:
None
Legal Owners:
SOLID, FLUID
Legal Members:
SYOUNG
9:13 12.0
Data Model Reference Manual
Description:
The WORLD is the topmost level of the design hierarchy within which all other
elements
exist. It cannot be deleted or copied in the same way that applies to say, a ZONE
or a BOX.
Its existence is controlled outside DESIGN by the ADMINISTRATION module of PDMS.
Attributes:
Legal Owners:
None
Legal Members:
9:14 12.0
Data Model Reference Manual
10.1 Introduction
This chapter shows the elements within the Schematic Database.
Attributes:
Legal Owners:
SCPLINE, SCHVAC
Legal Members:
SCSEGMENT, TEXT
10:1 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
SCGROUP
Legal Members:
SCCORE
Legal Owners:
SCCABLE
Legal Members:
None
10:2 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
SCGROUP
Legal Members:
None
Legal Owners:
SCSEGMENT
Legal Members:
None
10:3 12.0
Data Model Reference Manual
Legal Owners:
SCEQUIPMENT, SCSUBEQUIPMENT
Legal Members:
None
Attributes:
10:4 12.0
Data Model Reference Manual
Legal Owners:
SCGROUP
Legal Members:
Legal Owners:
SCSEGMENT
Legal Members:
None
Attributes:
10:5 12.0
Data Model Reference Manual
Legal Owners:
WORLD, SCGROUP
Legal Members:
Attributes:
Legal Owners:
SCGROUP
Legal Members:
SCBRANCH, TEXT
10:6 12.0
Data Model Reference Manual
Legal Owners:
SCSEGMENT
Legal Members:
None
10:7 12.0
Data Model Reference Manual
Legal Owners:
SCSEGMENT
Legal Members:
None
Legal Owners:
SCEQUIPMENT, SCSUBEQUIPMENT
Legal Members:
None
10:8 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
SCGROUP
Legal Members:
TEXT
10:9 12.0
Data Model Reference Manual
Legal Owners:
SCSEGMENT
Legal Members:
None
Legal Owners:
SCSEGMENT
Legal Members:
None
Legal Owners:
SCSEGMENT
Legal Members:
None
Attributes:
10:10 12.0
Data Model Reference Manual
Pressure Pressure
Dtmpmax Design temp. max
Dtmpmin Design temp. min
Otmpmax Operating temp. max
Otmpmin Operating temp. min
Dpremax Design pres. max
Dpremin Design pres. min
Opremax Operating pres. max
Opremin Operating pres. min
Pspec Pipe specification
Ispec Insulation spec reference
Tspec Tracing spec reference
Fluref Fluid reference
Ptspec Paint specification
Scsysf System reference array for schematic elements
Legal Owners:
SCGROUP
Legal Members:
SCBRANCH, TEXT
Attributes:
Legal Owners:
SCBRANCH
Legal Members:
10:11 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
SCGROUP
Legal Members:
None
Attributes:
Legal Owners:
SCEQUIPMENT
Legal Members:
10:12 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
SCGROUP
Legal Members:
None
Legal Owners:
SCSEGMENT
Legal Members:
None
10:13 12.0
Data Model Reference Manual
Legal Owners:
SCSEGMENT
Legal Members:
None
Description:
TEXT is a general element that can occupy most positions in the hierarchy. It can
be used to
store additional information about an owning or adjacent element.
Attributes:
10:14 12.0
Data Model Reference Manual
Legal Owners:
Legal Members:
None
Description:
The WORLD is the topmost level of the design hierarchy within which all other
elements
exist. It cannot be deleted or copied in the same way that applies to say, a ZONE
or a BOX.
Its existence is controlled outside DESIGN by the ADMINISTRATION module of PDMS.
Attributes:
Legal Owners:
None
Legal Members:
SCGROUP
10:15 12.0
Data Model Reference Manual
10:16 12.0
Data Model Reference Manual
11.1 Introduction
This chapter shows the elements within the Spooler Database.
Legal Owners:
SPLDRG, SPLTMP
Legal Members:
None
Legal Owners:
WLDGRP
Legal Members:
None
11:1 12.0
Data Model Reference Manual
11:2 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
ISODEPT
Legal Members:
SPLDRG
Legal Owners:
WLDGRP
Legal Members:
None
Legal Owners:
SPLDRG, SPLTMP
Legal Members:
IJOINT
11:3 12.0
Data Model Reference Manual
Legal Owners:
WLDGRP
Legal Members:
None
Attributes:
Legal Owners:
ISOREGI
Legal Members:
11:4 12.0
Data Model Reference Manual
11:5 12.0
Data Model Reference Manual
Description:
The WORLD is the topmost level of the design hierarchy within which all other
elements
exist. It cannot be deleted or copied in the same way that applies to say, a ZONE
or a BOX.
Its existence is controlled outside DESIGN by the ADMINISTRATION module of PDMS.
Attributes:
Legal Owners:
None
Legal Members:
ISODEPT
11:6 12.0
Data Model Reference Manual
12.1 Introduction
This chapter shows the elements within the System Database.
Legal Owners:
ACRW
Legal Members:
None
Legal Owners:
ACRST
Legal Members:
None
12:1 12.0
Data Model Reference Manual
Legal Owners:
ACRW
Legal Members:
ACRL
Attributes:
Legal Owners:
WORLD
Legal Members:
ACR, ACRST
Legal Owners:
RUNFILE
Legal Members:
None
Fname Filename
Legal Owners:
RUNFILE
Legal Members:
None
12:2 12.0
Data Model Reference Manual
Legal Owners:
RUNFILE
Legal Members:
None
Funit FUNIT
Modedb Database mode
Fname Filename
Legal Owners:
RUNFILE
Legal Members:
None
Fname Filename
Legal Owners:
RUNFILE
Legal Members:
None
Attributes:
Numbdb DB number
Stype SPECON type question
Fino File number
Area Area
CRCY Concurrency
12:3 12.0
Data Model Reference Manual
Legal Owners:
EXTLI, DBLI
Legal Members:
None
Legal Owners:
DBSET
Legal Members:
None
Attributes:
Legal Owners:
TEAM
Legal Members:
DB
12:4 12.0
Data Model Reference Manual
Legal Owners:
DBSTWL
Legal Members:
DBL, DBSTL
Legal Owners:
DBSET
Legal Members:
None
Attributes:
Legal Owners:
WORLD
Legal Members:
DBSET
Legal Owners:
USER
Legal Members:
DB
12:5 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
FONTWORLD
Legal Members:
None
Attributes:
Legal Owners:
STATUS
Legal Members:
FONTFILE, TTFONT
Legal Owners:
LCOMW
Legal Members:
None
12:6 12.0
Data Model Reference Manual
Legal Owners:
LCOML
Legal Members:
None
Legal Owners:
LCOMW
Legal Members:
LCOMD
Attributes:
Legal Owners:
WORLD
Legal Members:
12:7 12.0
Data Model Reference Manual
Legal Owners:
LCTIML
Legal Members:
None
Legal Owners:
LCOMW
Legal Members:
LCTIMD
Attributes:
Legal Owners:
MDBW
Legal Members:
DB
12:8 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
WORLD
Legal Members:
MDB
Legal Owners:
ROLE
Legal Members:
None
Attributes:
Legal Owners:
STATUS
12:9 12.0
Data Model Reference Manual
Legal Members:
RUNFILE
Legal Owners:
ROLWL
Legal Members:
PEROP
Attributes:
Legal Owners:
WORLD
Legal Members:
ROLE
Attributes:
Name
Name of the element
Smno
SMODU number
User security
Legal Owners:
RFWL
Legal Members:
Legal Owners:
SCOWL
Legal Members:
None
Attributes:
Legal Owners:
WORLD
Legal Members:
SCOPE
Attributes:
Legal Owners:
STWLD
Legal Members:
STLST
12:11 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
WORLD
Legal Members:
RFWL, FONTWORLD
Legal Owners:
STAMP
Legal Members:
None
Attributes:
Legal Owners:
WORLD
Legal Members:
STAMP
12:12 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
TEAMWORLD
Legal Members:
DBLI
Attributes:
Legal Owners:
WORLD
Legal Members:
TEAM
Legal Owners:
USER
Legal Members:
None
Attributes:
12:13 12.0
Data Model Reference Manual
Legal Owners:
FONTWORLD
Legal Members:
None
Attributes:
Legal Owners:
USERWORLD
Legal Members:
None
Attributes:
Password Password
Name Name of the element
Description Description
Acrli Access Control User assigned ACRs
Legal Owners:
USERWORLD
Legal Members:
TMLI, EXTLI
Attributes:
Legal Owners:
WORLD
12:14 12.0
Data Model Reference Manual
Legal Members:
USER, ULOGID
Description:
The WORLD is the topmost level of the design hierarchy within which all other
elements
exist. It cannot be deleted or copied in the same way that applies to say, a ZONE
or a BOX.
Its existence is controlled outside DESIGN by the ADMINISTRATION module of PDMS.
Attributes:
Legal Owners:
None
Legal Members:
12:15 12.0
Data Model Reference Manual
12:16 12.0
Data Model Reference Manual
13.1 Introduction
This chapter shows the elements within the Transaction Database.
Attributes:
Legal Owners:
TRMONTH
Legal Members:
TRUSER
Attributes:
Legal Owners:
TRMLST, TRFLST
Legal Members:
None
13:1 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
Legal Members:
TRFAILURE
Attributes:
13:2 12.0
Data Model Reference Manual
Legal Owners:
TRLOCATION
Legal Members:
Attributes:
Legal Owners:
TRUSER
Legal Members:
TRINCOMMAND
Attributes:
Legal Owners:
TRMLST
Legal Members:
None
13:3 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
Legal Members:
Attributes:
Legal Owners:
TRYEAR
Legal Members:
TRDAY
Attributes:
Legal Owners:
WORLD
Legal Members:
TRYEAR
Attributes:
13:4 12.0
Data Model Reference Manual
Legal Owners:
TRINCOMMAND
Legal Members:
Attributes:
13:5 12.0
Data Model Reference Manual
Legal Owners:
TRINCOMMAND
Legal Members:
Attributes:
Legal Owners:
Legal Members:
TRSUCCESS
13:6 12.0
Data Model Reference Manual
Attributes:
Legal Owners:
TRMLST, TRSLST
Legal Members:
None
Attributes:
Legal Owners:
TRDAY
Legal Members:
TRLOCATION
Attributes:
Legal Owners:
TRMSGW
Legal Members:
TRMONTH
13:7 12.0
Data Model Reference Manual
Description:
The WORLD is the topmost level of the design hierarchy within which all other
elements
exist. It cannot be deleted or copied in the same way that applies to say, a ZONE
or a BOX.
Its existence is controlled outside DESIGN by the ADMINISTRATION module of PDMS.
Attributes:
Legal Owners:
None
Legal Members:
TRMSGW
13:8 12.0
Data Model Reference Manual
Pseudo Attributes
14 Pseudo Attributes
14:1 12.0
Data Model Reference Manual
Pseudo Attributes
14:2 12.0
Data Model Reference Manual
Pseudo Attributes
14:3 12.0
Data Model Reference Manual
Pseudo Attributes
14:4 12.0
Data Model Reference Manual
Pseudo Attributes
14:5 12.0
Data Model Reference Manual
Pseudo Attributes
14:6 12.0
Data Model Reference Manual
Pseudo Attributes
14:7 12.0
Data Model Reference Manual
Pseudo Attributes
14:8 12.0
Data Model Reference Manual
Pseudo Attributes
14:9 12.0
Data Model Reference Manual
Pseudo Attributes
14:10 12.0
Data Model Reference Manual
Pseudo Attributes
14:11 12.0
Data Model Reference Manual
Pseudo Attributes
14:12 12.0
Data Model Reference Manual
Pseudo Attributes
14:13 12.0
Data Model Reference Manual
Pseudo Attributes
14:14 12.0
Data Model Reference Manual
Pseudo Attributes
14:15 12.0
Data Model Reference Manual
Pseudo Attributes
14:16 12.0
Data Model Reference Manual
Pseudo Attributes
14:17 12.0
Data Model Reference Manual
Pseudo Attributes
14:18 12.0
Data Model Reference Manual
Pseudo Attributes
14:19 12.0
Data Model Reference Manual
Pseudo Attributes
14:20 12.0
Data Model Reference Manual
Pseudo Attributes
14:21 12.0
Data Model Reference Manual
Pseudo Attributes
14:22 12.0
Data Model Reference Manual
Pseudo Attributes
14:23 12.0
Data Model Reference Manual
Pseudo Attributes
14:24 12.0
Data Model Reference Manual
Pseudo Attributes
14:25 12.0
Data Model Reference Manual
Pseudo Attributes
14:26 12.0
Data Model Reference Manual
Pseudo Attributes
14:27 12.0
Data Model Reference Manual
Pseudo Attributes
14:28 12.0
Data Model Reference Manual
Pseudo Attributes
14:29 12.0
Data Model Reference Manual
Pseudo Attributes
14:30 12.0
Data Model Reference Manual
Pseudo Attributes
14:31 12.0
Data Model Reference Manual
Pseudo Attributes
14:32 12.0
Data Model Reference Manual
Pseudo Attributes
14:33 12.0
Data Model Reference Manual
Pseudo Attributes
14:34 12.0
Data Model Reference Manual
Pseudo Attributes
14:35 12.0
Data Model Reference Manual
Pseudo Attributes
14:36 12.0
Data Model Reference Manual
Pseudo Attributes
14:37 12.0
Data Model Reference Manual
Pseudo Attributes
14:38 12.0
Data Model Reference Manual
Pseudo Attributes
14:39 12.0
Data Model Reference Manual
Pseudo Attributes
14:40 12.0
Data Model Reference Manual
Pseudo Attributes
14:41 12.0
Data Model Reference Manual
Pseudo Attributes
14:42 12.0
Data Model Reference Manual
Pseudo Attributes
14:43 12.0
Data Model Reference Manual
Pseudo Attributes
14:44 12.0
Data Model Reference Manual
Pseudo Attributes
14:45 12.0
Data Model Reference Manual
Pseudo Attributes
14:46 12.0
Data Model Reference Manual
Introduction to Attributes
15 Introduction to Attributes
All attributes can be queried and set by the user. However, many are automatically
set as a
result of commands. Only the attributes that you would normally set explicitly are
described
in full. The ones that are set automatically are of interest because you can report
on them.
Note that some attributes are used exclusively by PDMS modules. These are not
described
here.
1.
General attributes occur throughout the database; they are common to most
elements. For example, OWNER (every element in the Design data has an owner),
POS (position), ORI (orientation), BUILT (true or false, indicating whether it has
been
constructed on site or not).
2.
Special Attributes belong to particular elements or classes of elements and have
specific meanings for those elements; for example, FLOWD (flow direction) in a
Branch.
The special attributes are either self-explanatory or are explained in the context
of the
element under which they appear in this chapter.
Note:
Some special attributes are only used for drawing control within ISODRAFT or
DRAFT. How the settings of these attributes are applied is described in the
ISODRAFT or DRAFT Reference Manual.
In addition to their standard attributes, elements may have one or more user-
defined
attributes (UDAs). These are set and used in the same way as standard attributes,
except
that the UDA names are distinguished by being prefixed with a colon (:) character.
For
further details, see the LEXICON Reference Manual.
Name Attribute
All names start with a slash / and consist of any number of name parts separated by
further
slashes. The maximum length is 51 characters. A name part consists of any string of
15:1
12.0
Data Model Reference Manual
Introduction to Attributes
Real Attribute
A real attribute holds a single real number (e.g. 25.5, -0.057, 25683.5, etc.).
Real attributes
are generally used to store dimensions (e.g. DIAM, XLEN, etc.).
Integer Attribute
An integer attribute holds a single integer or whole number (e.g. 1, -2, 4000,
etc.). Integer
attributes are used in Piping Components to identify connection points (ARRIV,
LEAVE); in
Equipment Primitives to identify obstruction levels for clash detection (OBSTR);
etc.
Reference Attribute
A reference attribute holds a reference to another element. The attribute holds the
internal
system reference number, e.g. =12/106, and not the name of the element. Reference
attributes are used to forge logical links between elements. For example, the SPREF
Logical Attribute
A logical attribute is either TRUE or FALSE. An example of its use is the BUILT
attribute in a
Pipe which is needed to indicate whether the Pipe has been constructed on site or
not.
Word Attribute
A word attribute holds a string of up to four characters. Word attributes are used,
for
example, to indicate the direction of flow in a branch (FORW, BACK) etc.
String Attribute
A real array attribute holds more than one real number. For example, the position
attribute
(POS) consists of three real numbers and represents the X, Y and Z coordinates
which
define the position of an element.
An integer array attribute holds more than one integer. For example, the LEVEL
attribute
consists of two integers and is used to control the level range of drawing detail.
A reference array attribute holds more than one reference to another element. For
example,
a connection reference array (CRFA) is used to hold the connection links of a four-
way valve
(VFWA) or a CROSS.
15:2 12.0
Data Model Reference Manual
Introduction to Attributes
Noclaim Attribute
equipment. Note that there would be no warning if two branches were connected to
the
same nozzle with the last user to do a savework �winning�.
15:3 12.0
Data Model Reference Manual
Introduction to Attributes
15:4 12.0
Data Model Reference Manual
Introduction to Attributes
15:5 12.0
Data Model Reference Manual
Introduction to Attributes
15:6 12.0
Data Model Reference Manual
Introduction to Attributes
15:7 12.0
Data Model Reference Manual
Introduction to Attributes
15:8 12.0
Data Model Reference Manual
Introduction to Attributes
15:9 12.0
Data Model Reference Manual
Introduction to Attributes
15:10 12.0
Data Model Reference Manual
Introduction to Attributes
15:11 12.0
Data Model Reference Manual
Introduction to Attributes
15:12 12.0
Data Model Reference Manual
Introduction to Attributes
15:13 12.0
Data Model Reference Manual
Introduction to Attributes
15:14 12.0
Data Model Reference Manual
Introduction to Attributes
15:15 12.0
Data Model Reference Manual
Introduction to Attributes
15:16 12.0
Data Model Reference Manual
Introduction to Attributes
15:17 12.0
Data Model Reference Manual
Introduction to Attributes
15:18 12.0
Data Model Reference Manual
Introduction to Attributes
15:19 12.0
Data Model Reference Manual
Introduction to Attributes
15:20 12.0
Data Model Reference Manual
Introduction to Attributes
15:21 12.0
Data Model Reference Manual
Introduction to Attributes
15:22 12.0
Data Model Reference Manual
Introduction to Attributes
15:23 12.0
Data Model Reference Manual
Introduction to Attributes
15:24 12.0
Data Model Reference Manual
Introduction to Attributes
15:25 12.0
Data Model Reference Manual
Introduction to Attributes
15:26 12.0
Data Model Reference Manual
Introduction to Attributes
15:27 12.0
Data Model Reference Manual
Introduction to Attributes
15:28 12.0
Data Model Reference Manual
Introduction to Attributes
15:29 12.0
Data Model Reference Manual
Introduction to Attributes
15:30 12.0
Data Model Reference Manual
Introduction to Attributes
15:31 12.0
Data Model Reference Manual
Introduction to Attributes
15:32 12.0
Data Model Reference Manual
Introduction to Attributes
15:33 12.0
Data Model Reference Manual
Introduction to Attributes
15:34 12.0
Data Model Reference Manual
Introduction to Attributes
15:35 12.0
Data Model Reference Manual
Introduction to Attributes
15:36 12.0
Data Model Reference Manual
Introduction to Attributes
15:37 12.0
Data Model Reference Manual
Introduction to Attributes
15:38 12.0
Data Model Reference Manual
Introduction to Attributes
15:39 12.0
Data Model Reference Manual
Introduction to Attributes
15:40 12.0
Data Model Reference Manual
Introduction to Attributes
15:41 12.0
Data Model Reference Manual
Introduction to Attributes
15:42 12.0
Data Model Reference Manual
Introduction to Attributes
15:43 12.0
Data Model Reference Manual
Introduction to Attributes
15:44 12.0
Data Model Reference Manual
Introduction to Attributes
15:45 12.0
Data Model Reference Manual
Introduction to Attributes
15:46 12.0
Data Model Reference Manual
Introduction to Attributes
15:47 12.0
Data Model Reference Manual
Introduction to Attributes
15:48 12.0
Data Model Reference Manual
Introduction to Attributes
15:49 12.0
Data Model Reference Manual
Introduction to Attributes
15:50 12.0
Data Model Reference Manual
Introduction to Attributes
15:51 12.0
Data Model Reference Manual
Introduction to Attributes
15:52 12.0
Data Model Reference Manual
Introduction to Attributes
15:53 12.0
Data Model Reference Manual
Introduction to Attributes
15:54 12.0
Data Model Reference Manual
Introduction to Attributes
15:55 12.0
Data Model Reference Manual
Introduction to Attributes
15:56 12.0
Data Model Reference Manual
Introduction to Attributes
15:57 12.0
Data Model Reference Manual
Introduction to Attributes
15:58 12.0
Data Model Reference Manual
Introduction to Attributes
15:59 12.0
Data Model Reference Manual
Introduction to Attributes
15:60 12.0
Data Model Reference Manual
Introduction to Attributes
15:61 12.0
Data Model Reference Manual
Introduction to Attributes
15:62 12.0
Data Model Reference Manual
Introduction to Attributes
15:63 12.0
Data Model Reference Manual
Introduction to Attributes
15:64 12.0
Data Model Reference Manual
Introduction to Attributes
15:65 12.0
Data Model Reference Manual
Introduction to Attributes
15:66 12.0
Data Model Reference Manual
Introduction to Attributes
15:67 12.0
Data Model Reference Manual
Introduction to Attributes
15:68 12.0
Data Model Reference Manual
Introduction to Attributes
15:69 12.0
Data Model Reference Manual
Introduction to Attributes
15:70 12.0
Data Model Reference Manual
Introduction to Attributes
15:71 12.0
Data Model Reference Manual
Introduction to Attributes
15:72 12.0
Data Model Reference Manual
Introduction to Attributes
15:73 12.0
Data Model Reference Manual
Introduction to Attributes
15:74 12.0
Data Model Reference Manual
Introduction to Attributes
15:75 12.0
Data Model Reference Manual
Introduction to Attributes
15:76 12.0
Data Model Reference Manual
Introduction to Attributes
15:77 12.0
Data Model Reference Manual
Introduction to Attributes
15:78 12.0
Data Model Reference Manual
Introduction to Attributes
15:79 12.0
Data Model Reference Manual
Introduction to Attributes
15:80 12.0
Data Model Reference Manual
Introduction to Attributes
15:81 12.0
Data Model Reference Manual
Introduction to Attributes
15:82 12.0
Data Model Reference Manual
Introduction to Attributes
15:83 12.0
Data Model Reference Manual
Introduction to Attributes
15:84 12.0
Data Model Reference Manual
Index
Attributes
types . . . . . . . . . . . . . . . . . . . . . . . .15:1
defined . . . . . . . . . . . . . . . . . . . . . . . . .15:1
defined attributes . . . . . . . . . . . . . . . . .15:1
#106 . . . . . . . . . . . . . . . . . . . . . . . . . . .15:1
Attributes
user . . . . . . . . . . . . . . . . . . . . . . . .15:1
User . . . . . . . . . . . . . . . . . . . . . . . . . . .15:1