Professional Documents
Culture Documents
Service Manual: Product Type: LCD TV Chassis: ML-024A Manual Part #: 3828VD0131Y Product Year: 2003 Model Series
Service Manual: Product Type: LCD TV Chassis: ML-024A Manual Part #: 3828VD0131Y Product Year: 2003 Model Series
CONTENTS
Specifications ..............................................................4
Description of Controls .................................................5
Adjustment Instructions ................................................8
Diagrams ...................................................................10
Parts List ...................................................................13
Schematics ....................................................................
Printed in Korea
PRODUCT SAFETY
CAUTION: Do not attempt to modify this product in any way. Caution: Be sure no power is applied to the chassis or circuit, and observe
Never perform customized installations without manufacturer’s all other safety precautions.
approval.
Unauthorized modifications will not only void the warranty, but may 8. Minimize bodily motions when handling unpackaged replacement ES
lead to property damage or user injury. devices. (Otherwise, seemingly harmless motion, such as the brushing
together of your clothing or the lifting of your foot from a carpeted floor, can
generate static electricity sufficient to damage an ES device.)
GENERAL GUIDANCE
An lsolation Transformer should always be used during the servicing
of a receiver whose chassis is not isolated from the AC power line. Use a REGULATORY INFORMATION
transformer of adequate power rating to protect against personal injury from This equipment has been tested and found to comply with the limits for a Class
electrical shocks. It will also protect the receiver and its components from being B digital device, pursuant to Part 15 of the FCC Rules.
damaged by accidental shorts of the circuitry that may be inadvertently These limits are designed to provide reasonable protection against harmful
introduced during the service operation. interference when the equipment is operated in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
Before returning the receiver to the customer, always perform an AC leakage installed and used in accordance with the instruction manual, may cause
current check on the exposed metallic parts of the cabinet, such as antennas, harmful interference to radio communications. However, there is no guarantee
terminals, etc., to be sure the set is safe to operate that interference will not occur in a particular installation. If this equipment does
without damage of electrical shock. cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: Reorient
LEAKAGE CURRENT COLD CHECK or relocate the receiving antenna; Increase the separation between the
(ANTENNA COLD CHECK) equipment and receiver; Connect the equipment into an outlet on a circuit
With the instrument AC plug removed from AC source, connect an electrical different from that to
jumper across the two AC plug prongs. Place the AC switch in the on position, which the receiver is connected; Consult the dealer or an experienced radio/TV
connect one lead of ohm-meter to the AC plug prongs tied together and touch technician for help.
other ohm-meter lead in turn to each exposed metallic parts such as antenna
terminals, phone jacks, etc. If the exposed metallic part has a return path to the The responsible party for this device’s compliance is:
chassis, the measured resistance should be between 1MΩ and 5.2MΩ. When
the exposed metal has no return path to the chassis the reading must be Zenith Electronics Corporation
infinite. Any other abnormality that exists must be corrected before 201 James Record Road
the receiver is returned to the customer. Huntsville, AL 35824, USA
Digital TV Hotline: 1-800-243-0000
- 2 -
TABLE OF CONTENTS
SPECIFICATIONS.................................................................4
BLOCK DIAGRAM...............................................................10
EXPLODED VIEW...............................................................12
SCHEMATIC DIAGRAM..........................................................
- 3 -
SPECIFICATIONS
Model L15V26D
Power consumption 45 W
Power supply cord set Standard North America three wire earth-grounding
with flexible cord SJT type or higher type.
- 4 -
DESCRIPTION OF CONTROLS
Front of the TV
Channel Buttons
ch
Volume Buttons
vol
enter
Enter Button
menu
Menu Button
tv/video
TV/Video Button
on/off
On/Off Button
Remote Control Sensor
Power/Standby indicator
Illuminates red in standby
mode, Illuminates green when
the TV is turned on.
- 5 -
DESCRIPTION OF CONTROLS
Back of the TV
Connection Panel
AC INPUT
Y PB PR H/P S-VIDEO VIDEO (MONO) L AUDIO R PC INPUT ANT IN PC
(120V) COMPONENT(480i/480p/720p/1080i) VIDEO IN +75 Ω SOUND
DVD/DTV IN
- 6 -
DESCRIPTION OF CONTROLS
power tv/video
POWER TV/VIDEO
1 2 3
NUMBERS
4 5 6
7 8 9
apc cc
MENU MUTE
ch
ENTER
vol enter vol
CHANNEL (DE)
VOLUME (F G)
mts ch sleep
MTS SLEEP TIMER
- 7 -
ADJUSTMENT INSTRUCTIONS
4. Option
No. Item Specification Remark
1 COMPO 0 Component input mode
0 : NTSC-M(North America)
1 : LG Protocol(LG program)
0 : Black-Back 1 : Blue-Back
- 8 -
ADJUSTMENT INSTRUCTIONS
5. RS232C(RMS Only)
(1) Use the Untwisted 232C Cable
(2) Use the PC program which is sent by Zenith
(3) 232C Protocol
8 Poll/Front Panel A0A0 A0 : Key Lock command(Both Local and Remocon keys)
9 Poll/Front Panel B0B0 B0 : Key Unlock command(Both Local and Remocon keys)
Data Bytel(XX)
Bit Description
Data Byte2(YY)
Bit Description
- 9 -
BLOCK DIAGRAM
- 10 -
NOTES
- 11 -
EXPLODED VIEW
521
400
520
300
120
112
530
310
410
560
330
- 12 -
EXPLODED VIEW PARTS LIST
560 6871VSMU71B PCB ASSEMBLY,SUB POWER ML024A RU-15LA50 POWER ASSY SKD
- 13 -
REPLACEMENT PARTS LIST
For Capacitor & Resistors, the CC, CX, CK, CN : Ceramic RD : Carbon Film
charactors at 2nd and 3rd digit CQ : Polyestor RS : Metal Oxide Film
in the P/No. means as follows; CE : Electrolytic RN : Metal Film RUN DATE : 2003.8.20
RF : Fusible
- 14 -
REPLACEMENT PARTS LIST
C381 0CE106DF618 10UF STD 16V M C718 181-091D DEHR33A102KN2A 1000PF 1KV 10%,10%
C403 0CE476DH618 47UF STD 25V 20% C719 0CE227DK618 220UF STD 50V M
C404 0CE108DD618 1000UF STD 10V M C720 181-091D DEHR33A102KN2A 1000PF 1KV 10%,10%
C408 0CE106DK618 10UF STD 50V M C721 0CE4772J618 470UF KMF 35V 20%
C412 0CE105DK618 1UF STD 50V M C722 0CE477BF618 470UF KME 16V M
C499 0CE476DF618 47UF STD 16V M C723 0CE477BF618 470UF KME 16V M
C501 0CE107DF618 100UF STD 16V M C725 0CE4772J618 470UF KMF 35V 20%
C51 0CF2241N5AA 0.22UF D 100V 10% C726 0CE477BF618 470UF KME 16V M
C523 0CE104DK618 0.1000UF STD 50V M C730 0CE4772J618 470UF KMF 35V 20%
C526 0CE107DF618 100UF STD 16V M C731 0CE477BF618 470UF KME 16V M
C541 0CE107DF618 100UF STD 16V M C732 0CE4772J618 470UF KMF 35V 20%
C55 0CF2241N5AA 0.22UF D 100V 10% C733 181-120K 2200PF 4KV M E
C581 0CE107DF618 100UF STD 16V M C734 0CE4772J618 470UF KMF 35V 20%
C60 0CK105DF64A 1UF 2012 16V 20%
C735 0CE477BF618 470UF KME 16V M
C601 0CE477BF618 470UF KME 16V M
C736 0CE4772J618 470UF KMF 35V 20%
C602 0CE477BF618 470UF KME 16V M
C777 181-091D DEHR33A102KN2A 1000PF 1KV 10%,10%
C605 0CE107BF618 100UF KME 16V M
C799 0CE107BF618 100UF KME 16V M
C613 0CE106DF618 10UF STD 16V M
C810 0CK823DK56A 82000PF 2012 50V 10%
C614 0CE106DF618 10UF STD 16V M
C832 0CE107DF618 100UF STD 16V M
C616 0CE107DF618 100UF STD 16V M
C617 0CE107BF618 100UF KME 16V M JACK
C62 0CK105DF64A 1UF 2012 16V 20%
JA201 6612VCH003B JACK,PHONE PEJ012C H=6.5 STEREO 1P
C620 0CE335DK618 3.3UF STD 50V 20%
RJ201 6613V00008F JACK ASSY,PMJ014F E/P(ST)+SVHS+3P
C621 0CE107BF618 100UF KME 16V M
C626 0CK224DF56A 220000PF 2012 16V 10% RJ202 6612VJH008D JACK,RCA PJ6063D DVD IN 3P
- 15 -
REPLACEMENT PARTS LIST
- 16 -
MAIN(TOP) MAIN(BOTTOM)
CONTROL POWER