Professional Documents
Culture Documents
Assignment SFD and BMD 2020
Assignment SFD and BMD 2020
6. Each solution must have at least one checker. More than one person can be checkers to a
solution set (minimum of one and maximum of three checkers). Each person should at
least be a checker to at least one solution set.
7. Originality of solution sets will also be assessed accordingly.
Thank you
SHEAR FORCE AND BENDING MOMENT ASSIGNMENT
FIGURE Q1
FIGURE Q2
Q3. Figure Q3 shows a shear force diagram of a beam that is supported at A and D.
a) By assuming that no moment is applied to the beam, construct the loading diagram of the
beam.
b) Also, construct the bending moment diagram of the beam.
Please indicate all important values in the diagrams.
FIGURE Q2
Q4. Beam ABCD, as shown in Figure Q4, has an overhanging span AB, while supported by a pin
and a roller at points B and D respectively. A 100 kNm moment is applied at point A and a
vertical 30 kN point load acts at point C. Span BC supports a uniformly distributed load while
span CD supports a trapezoidal distributed load; their intensities are as indicated in the figure.
Draw the shear force and bending moment diagrams for the beam. Please indicate all relevant
values and their locations where necessary.
30 kN
25 kN/m
A B D
C
5m 5m 5m