Professional Documents
Culture Documents
Understanding ISO Codes Appearance of Water in Oil: Viscosity Grading Systems
Understanding ISO Codes Appearance of Water in Oil: Viscosity Grading Systems
www.hyprofiltration.com
of detergent engine oil 16 320 640
15 160 320
can contaminate 14 80 160 Particle
Particles
ISO 4406 ISO
Per
industrial oils. 13 40 80 Size
Milliliter
Code Range Code
12 20 40 4μ[c] 492 320 ~ 640 16
11 10 20 6μ[c] 149 80 ~ 160 14
10 5 10 10μ[c] 41
9 2.5 5 14μ[c] 15 10 ~ 20 11 FCLCOD
8 1.3 2.5 21μ[c] 5
7 0.64 1.3 38μ[c] 1 Filter carts for particulate removal,
500 ppm 1000 ppm 2500 ppm 5000 ppm 10000 ppm
6 0.32 0.64
water absorption, coalescence,
Understanding ISO Codes- The ISO cleanliness code (per ISO4406-1999) is used to and diesel conditioning.
Free Water- Large drops that readily settle out. quantify particulate contamination levels per milliliter of fluid at 3 sizes 4μ[c], 6μ[c] and 14μ[c]. Compatible with fluids up to
The ISO code is expressed in 3 numbers (example: 19/17/14). Each number represents a
contaminant level code for the correlating particle size. The code includes all particles of the ISOVG680.
23/21/19 20/18/15 16/14/11 specified size and larger. It is important to note that each time a code increases the quantity
range of particles is doubling.
Water is one of the most common and most Oil Analyses Filter Patches
Understanding the condition of your fluid is the
DFE Rated Filter Elements Current Target
ISO Code ISO Code
Target Target
ISO Code ISO Code
Target
ISO Code
Laboratory and field tests prove time and again that
Hy-Pro filters consistently deliver lower ISO fluid
Lower ISO Codes and
damaging contaminants found in a lube or first step toward improving your system
cleanliness. Establish your current ISO code, set Improve Reliability 2 x Life 3 x Life 4 x Life 5 x Life cleanliness codes.
hydraulic system. Continuous or periodic a target and a plan of action, and finally trend your
26/24/21 22/20/17
25/23/20 21/19/16
20/18/15 19/17/14
19/17/14 17/15/12
17/15/12
16/14/11
Improving fluid cleanliness means reduced downtime,
progress to your goal. more reliable equipment, longer fluid life, fewer
high water levels can result in damage such as: 22/22/19 20/18/15 16/16/13 16/14/11 15/13/10 maintenance hours, and reduces costly component
23/21/18 19/17/14 17/15/12 15/13/10 14/12/9 replacement or repair expenses.
22/20/17 18/16/13 16/14/11 15/13/10 13/11/8
Hydraulic Component
• Metal Etching (Corrosion) 21/19/16 17/15/12
20/18/15 16/14/11
15/13/10
14/12/9
13/11/8
-
-
- Current Target Target Target Target
PTK1
• Abrasive Wear in Hydraulic Components 19/17/14 15/13/10 13/11/8 - - ISO Code
ISO Code
2 x Life
ISO Code ISO Code ISO Code
3 x Life 4 x Life 5 x Life
1000 (0.1%) 500 (0.05%) 250 (0.025%) 100 (0.01%) 50 (0.005%) 600 3000
30 Recommended Target ISO Cleanliness Codes and media selection for systems using
Rolling Journal Rolling Journal Rolling Journal Rolling Journal Rolling Journal 500 140 petroleum based fluids per ISO4406:1999 for particle sizes 4μ[c] / 6μ[c] / 14μ[c]*
460 7
Element Bearing Element Bearing Element Bearing Element Bearing Element Bearing 400 2000 Pressure Media Pressure Media Pressure Media FSL
5000 2.3 1.6 3.3 1.9 4.8 2.3 7.8 2.9 11.2 3.5 300 320 6 60 1500 < 140 bar βx[c] = 1000 212 bar βx[c] = 1000 > 212 bar βx[c] = 1000
20 < 2000 psi (βx = 200) 3000 psi (βx = 200) > 3000 psi (βx = 200)
2500 1.6 1.3 2.3 1.6 3.3 1.9 5.4 2.4 7.8 2.9 100
Pumps
220 5 50 90 1000 90
1000 1.4 1.2 2 1.5 3.3 1.9 4.8 2.3 200 Fixed Gear 20/18/15 22μ[c] (25μ) 19/17/15 12μ[c] (12μ) - -
800 80 Fixed Piston 19/17/14 12μ[c] (12μ) 18/16/13 12μ[c] (12μ) 17/15/12 7μ[c] (6μ)
500 1.4 1.2 2.3 1.6 3.3 1.9 150 4 40
Component Life Fixed Vane 20/18/15 22μ[c] (25μ) 19/17/14 12μ[c] (12μ) 18/16/13 12μ[c] (12μ)
600 70
250 Extension by Removing Water* 1.5 1.3 2.3 1.6 85W Variable Piston 18/16/13 7μ[c] (6μ) 17/15/13 7μ[c] (6μ) 16/14/12 5μ[c] (3μ)
100 100 3 30 500
Variable Vane 18/16/13 7μ[c] (6μ) 17/15/12 5μ[c] (3μ) - -
100 1.4 1.2 80
10
400
60
*Courtesy of Noria 9
68 2 80W 55 Valves
8
60 300 Cartridge 18/16/13 12μ[c] (12μ) 17/15/12 7μ[c] (6μ) 17/15/12 7μ[c] (6μ)
7 20 50
50 200 Check Valve 20/18/15 22μ[c] (25μ) 20/18/15 22μ[c] (25μ) 19/17/14 12μ[c] (12μ)
40 6 46 1 45 Directional (solenoid) 20/18/15 22μ[c] (25μ) 19/17/14 12μ[c] (12μ) 18/16/13 12μ[c] (12μ)
75W Flow Control 19/17/14 12μ[c] (12μ) 18/16/13 12μ[c] (12μ) 18/16/13 12μ[c] (12μ)
30 5 32 15W 150
Pressure Control (modulating) 19/17/14 12μ[c] (12μ) 18/16/13 12μ[c] (12μ) 17/15/12 7μ[c] (6μ)
10W Proportional Cartridge Valve 17/15/12 7μ[c] (6μ) 17/15/12 7μ[c] (6μ) 16/14/11 5μ[c] (3μ)
4 22 100 40 Proportional Directional 17/15/12 7μ[c] (6μ) 17/15/12 7μ[c] (6μ) 16/14/11 5μ[c] (3μ)
20 5W, 0W Proportional Flow Control 17/15/12 7μ[c] (6μ) 17/15/12 7μ[c] (6μ) 16/14/11 5μ[c] (3μ)
15 Proportional Pressure Control 17/15/12 7μ[c] (6μ) 17/15/12 7μ[c] (6μ) 16/14/11 5μ[c] (3μ)
Servo Valve 16/14/11 7μ[c] (6μ) 16/14/11 5μ[c] (3μ) 15/13/10 5μ[c] (3μ)
10 10 60
Bearings
Ball Bearing 15/13/10 5μ[c] (3μ) - - - -
Gearbox (industrial) 17/16/13 12μ[c] (12μ) - - - - Dedicated filtration skids and
Journal Bearing (high speed) 17/15/12 7μ[c] (6μ) - - - -
panels for gearbox and side-loop
Journal Bearing (low speed) 17/15/12 7μ[c] (6μ) - - - -
Roller Bearing 16/14/11 7μ[c] (6μ) - - - - reservoir conditioning.
Actuators
Cylinders 17/15/12 7μ[c] (6μ) 16/14/11 5μ[c] (3μ) 15/13/10 5μ[c] (3μ)
Vane Motors 20/18/15 22μ[c] (25μ) 19/17/14 12μ[c] (12μ) 18/16/13 12μ[c] (12μ)
Axial Piston Motors 19/17/14 12μ[c] (12μ) 18/16/13 12μ[c] (12μ) 17/15/12 7μ[c] (6μ)
Gear Motors 20/18/14 22μ[c] (25μ) 19/17/13 12μ[c] (12μ) 18/16/13 12μ[c] (12μ)
BEFORE AFTER Radial Piston Motors 20/18/15 22μ[c] (25μ) 19/17/14 12μ[c] (12μ) 18/16/13 12μ[c] (12μ)
VUD Vacuum Dehydrator COT Turbine Oil Coalesce Skid-
Rapidly removes free, emulsified and dissolved water Rapidly removes free and emulsified water to < 150 Test Stands, Hydrostatic
to < 50 PPM (0.005%). Turbine oil, AW Hydraulic and ppm (0.015%) with high single pass efficiency. Turbine Test Stands 15/13/10 5μ[c] (3μ) 15/13/10 5μ[c] (3μ) 15/13/10 5μ[c] (3μ)
lube oil up to ISO VG680. oil and diesel fuels up to ISO VG68. Hydrostatic Transmissions 17/15/13 7μ[c] (6μ) 16/14/11 5μ[c] (3μ) 16/14/11 5μ[c] (3μ)
FPL
*Depending upon system volume and severity of operating conditions, a combination of filters
with varying degrees of filtration efficiency might be required (i.e. pressure, return, and off-line
filters) to achieve and maintain the desired fluid cleanliness.