ITEX
MALAYSIA
14-18 MAY 2010 - KUALA LUMPUR CONVENTION CENTRE « MALAYSIA
21% INTERN,
| |
CREATIVITY: PATHWAY TO INNOVATIVE ECONOMY
HIGHLIGHT: CONCURRENT EXHIBITION:__UNIVERSITI MALAYA — a
PROF. DR. GAN SENG NEON, ASSOC. PROF. DR. NOOR HAYATY ABU KASIM,
INVENTOR
SONJA THEN
CONTACT MOBILE : 6013 3911432 EMAIL: sngan@umedu.my
INVENTION MICROCAPSULES FOR SELF-HEALING DENTAL MATERIAL
DESCRIPTION Microcapsules filled with a healing-monomer were prepared and embedded in a dental
matrix together with a selective catalyst. In the event the host material cracks, the
microcapsules would rupture releasing the healing-monomer into the crack plane, and
polymerize to mend the crack
INVENTOR PROF. DR. A. S. M. A. HASEEB, MD. ARAFAT MAHMOOD, TAY SEE LENG, DR.
MOHD. RAFIE JOHAN
CONTACT MOBILE: 603 79674402 EMAIL: haseeb@umedumy
INVENTION DEVELOPMENT OF NANOCOMPOSITE BASED ECO-FRIENDLY SOLDER
DESCRIPTION Recent environmental concerns require replacement of the existing Pb-Sn solders,
Green Pb-free solders have been developed based cn nanocomposite. Nanoparticles
reinforcement suppresses the growth of interfacial IMC and therefore can lead to
better performance, reliability of electronic devices..
INVENTOR DR. NOR HAFIZAH RAMLI@SULONG, YEW MING GHIAN
CONTACT MOBILE: 6017 4625668 EMAIL: songyew63@gmall.com
INVENTION INVESTIGATION ON INTUMESCENT COATING MADE WITH @ NEW BIO-FILLER,
CES AS FIRE PROTECTIVE MATERIALS FOR STEEL
DESCRIPTION The new intumescent coatings are produced using recycled chicken eggshell (CES)
as a bioviler material that is able to reduce the production cost and fulfil the high
Performance requirements of the inturnescent coatings while being environmentally
friendly.
INVENTOR ASSOC. PROF. DR. NOOR HAYATY ABU KASIM, DR. AHMED ABDULLAH ALI
MADFA, ASSOC. PROF. DR. MOHD. HAMDI BIN ABD. SHUKOR, DR. REZA
RAHBARI GHAHNAVYEH, DR. MEHDI BAYAT
CONTACT MOBILE = 603 79674806 EMAIL: nhayaty@umedu.my
INVENTION NEW GENERATION OF DENTAL POSTS FOR REHABILITATION OF
ENDODONTICALLY TREATED TOOTH
DESCRIPTION This newy designed dental post will definitely reduce thermo-mechanical stress
concentration at beth coronal and apical parts of tooth and enhance the durability of
restoration,
mee UNIVERSIT! MALAYSIA PERLIS-
INVENTOR NURJULIANA JUHARI, NUR SYAKIMAH ISMAIL
CONTACT MOBILE : 6012 099673 EMAIL; nurjuliana@unimap.edu.my
INVENTION BST CAPACITOR THIN FILM
DESCRIPTION Ferroelectric Ba0.5S10.5Ti03 (BST) thin films are well known as dielectric materials,
‘They have been used as capacitors and high density dynamic random access
memory (ORAM) due to their high dielectric constant and high capacity of charge
storage and ferroelectric device.
INVENTOR DR. IR. SALMAH HUSSEINSYAH, DR. SUPRI A GHANI, DR. IR.
‘SURYADIANSYAH, FAISAL AMRI, ISMAIL IBRAHIM
CONTACT MOBILE: 6012 5840257 EMAIL : irsalmah@unimap.edu.my
INVENTION CHITOSAN-LATEX MEMBRANE FILM FOR HEAVY METAL REMOVAL
DESCRIPTION The affinity membrane has emerged as an alternative to the particle media, to
‘overcome mass transfer resistance. The hydrophobic membrane is from the
commercially available materials, such as nylon, polysulfone, polycarbonate, etc. The
most these materials are relative expansive.
INVENTOR DR MOHD NAZREE DERMAN, JUYANA AB. WAHAB
CONTACT MOBILE = 6012 6197341 EMAIL: nazree@unimap.edu.my
INVENTION PA-AAO BASED SENSOR FOR HUMIDITY DETECTION
DESCRIPTION A porous PA-AAO film has highiy ordered nanoporous structure that has central
straight pores perpendicular to substrate surface. The geometrical structure and
unique properties of AAO film makes the AAO film drawn great attention in wide range
of application especialy in electronic industry,
INVENTOR ASSOC, PROF. IR. MOHD ICHWAN NASUTION, PROF. DR. KAMARUDIN
HUSSIN, PROF. DR. SHAMSUL BAHARIN JAMALUDIN, ASSOC. PROF, CHE
MOHD RUZAIDI GHAZALI, DR. KHAIREL RAFEZI AHMAD, GHEK IDRUS OMAR,
MOHAMED FAISOL MOHAMED NOR, MOHAMAD SAFWAN ISA
‘CONTACT MOBILE: 6013 4653074 EMAIL: ichwan@unimap.edu.mry
INVENTION CAST AL-PP DECORATION PRODUCT
DESCRIPTION ‘The idea of research is to combine aluminium with non mstal polypropylene as a
decoration product, to minimize the production cost without changing the farm or
shape of product since polypropylene has low density, low melting temperature and
cheaper price, compared to the aluminium product itself
ITEX®
67