Professional Documents
Culture Documents
Double Shaft Low Speed Shredder Model: FMD-25
Double Shaft Low Speed Shredder Model: FMD-25
Model: FMD-25
1. Introduction
1.1 Slow speed Dual shaft Cross Crushing shredder
This machine is designed to destroy all kinds of used medical plastic disposal such as plastic utensils,
syringes, test tubes, ELISA plate, dish, dilution cup, straw, tip, urine cup, pill bottle and medical used needle,
small glass bottles and so on. it is durable and safety and with good structure. It can destroy the medical
disposal plastic into small pieces, so that to avoid the reuse and the volume of transportation of waste by
85%.
1.2 Product usage
Hospital, clinic, laboratory and so on.
1.3 Main Feature:
1.3.1 Double shaft
This machine choose double shaft shredding systems, and the medical waste will become small pieces
after grinding and shredding, so that to reduce the volume by 85%.we use 10pcs of knives in each set
of machine the knife is durable and it is made of special steel and anti-rust and with long life span.
1.3.2 Waste Collection
With plastic container of waste collection, all waste will fall into the plastic container .
1.3.3 Material
The body is made of mild steel powder coated , anti-rust, and the waste collection container is made
of plastic and the blade is made of SKD11
1.3.4 Good structure
With good appearance as well as good function the height of the waste inlet is suitable for putting in
the waste, and the operation panel is convenient for operation.
1.3.5 with castors
With 4 castors, easy for movement
1.3.6 Easy to operate
With operation panel and the operator can operate it with just minutes training.
1.3.7 Operation panel
There is various button for different function
“START”
“STOP”
“EMERGENCY STOP”
“POWER LIGHT”
“DISINFECTION” for UV and Ozone disinfection.
“POWER SWITCH”.
2. Parameter:
Destroying method Double shaft cutting
Product size 760*630*1200mm
Crushing capacity 400-500pcs of bottles(25g)/hour
Power supply 220V,50Hz, single phase power supply
Internal protection overload protection , leakage protection
Thermal hypersensitivity protection,
Interface voltage Safety low voltage on the operation panel.
Output power 1500VA
Material of shell Mild steel powder coated
Temperature in operation:-5°C~+50°C stored:-20°C~+55°C
Relative humidity 60%~80%
Waste collector 1pc of Waste collector
Number of knife 10pcs
Motor Quiet and low speed motor.
Low noise 60 - 70 dB (A)
Rpm 30
plastic utensils, syringes, test tubes, ELISA plate,
Destroying material
dish, dilution cup, straw, tip, urine cup and so on
3.1 components of plastic shredder
Power Switch
Operation Panel
Blade
Drive sprocket